Question about Whirlpool Washing Machines
There are generally only a couple of reasons for this. First is that the small screens in the end of the water hoses are clogged or blocked with lime or calcium deposits. You can turn off the water and remove each hose and inspect the screens in the hoses, clean them or replace them. You will also need to inspect the inlet screens on the water fill valve on the washer where the hoses connect. If you have clean hose screens then the problem may be in the fill valve itself. You can test this by changing the water temp and starting the washer, if you start on cold and don't get any water more the water temp selector to the warm of hot position. You should get one or the other. If you only get cold or hot but not warm then you will need to replace the fill valve.
Posted on Aug 06, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 25, 2015 | Whirlpool Washing Machines
Nov 30, 2014 | Whirlpool Washing Machines
Sep 25, 2012 | Whirlpool Washing Machines
Jun 17, 2011 | Whirlpool Cabrio WTW6600SBT Top Load...
Sep 16, 2010 | Whirlpool Washing Machines
Sep 07, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...
Aug 19, 2010 | Whirlpool Washing Machines
Nov 05, 2009 | Whirlpool Washing Machines
Oct 17, 2009 | Whirlpool Calypso GVW9959K Top Load Washer
73 people viewed this question
Usually answered in minutes!