Question about Pride Jazzy 1103 Ultra Indoor Power Wheelchair

1 Answer

Jazzy 610 got wet. controller lights blink - Pride Jazzy 1103 Ultra Indoor Power Wheelchair

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 232 Answers

Electricity and water don't mix. Allow the controller to dry out for several days. Even if it looks dry, water may have collected inside and fried something.
The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

Posted on Oct 20, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My chair is blinking 4 times and I do not have a manual


If it is a Pride Jazzy or similar, the Diagnostic Flash Codes are in this PDF file.

PDF]INFINFB2048_Jazzy_Select_14_Troubleshooting ... - Pride Mobility www.pridemobility.com/download.php?f=troubleshooting/INFINFB2048_Jazzy...
  1. Cached
  2. Similar
basic troubleshooting instructions for the Jazzy Select 14/14XL power chairs. ... on my Jazzy Select 14/14XL seem to be "dead" (controller does not light up when .... What if the left red battery condition meter LED on the VR2 or VSI is flashing? chair is blinking 4 times Google Search

Nov 15, 2016 | Health & Beauty

1 Answer

What does it mean on 1122 jazzy when the two red lights blink


JAZZY 1122 - Pride Mobility Products

www.pridemobility.com/...manuals/...jazzy/.../au_jazzy_1...
Pride MobilityJAZZY 1122. How a Power Chair Should ... NOTE: This owner's manual is compiled from the latest specifications and product information available at the time of .

Jul 31, 2015 | Pride Mobility Jazzy 1122 Electric...

1 Answer

I have a jazzy 610. There are 8 lights flashing. No pause. Just fast flashing. What does this mean?


"A controller system fault is indicated. Make sure that all connections are secure."
(Owners Manual - Page 35).
http://www.scootaround.com/files/manuals/pridemobility/Pride%20Jazzy%20610%20Owner's%20Manual.pdf

Apr 21, 2015 | Health & Beauty

1 Answer

Jazzy 1133 has new batteries. All lights are lit on the battery condition meter. Maximum speed/profile indicator constantly blinks no matter how many sements are lit. After I turn it off and waiting a...


If all lights are flashing excessive voltage has been applied to the controller system. 6 flashing lights on the 1133 indicates that the chair is being inhibited by the battery charger. Try unplugging the battery charger. Check you battery connections.

Mar 30, 2013 | Pride Jazzy 1113 Power Chair

1 Answer

Blinking yellow wrench light on pride jazzy 614 HD


Your version has a Dynamic Controls model controller and joystick.
Unplug the charger and engage the motor/brake lever so the chair is no longer in free-wheel mode (con't push by hand)
Turn the chair off, wait 5 seconds, turn the chair back.
If chair still does not run and your wrench is flashing you have a problem. Count the wrench flashes - the flash count indicates the error detected. 3, 4, 5, and 6 flashes indicate and error with the motors.
3=Left motor fault
4=Right motor fault
5=Left brake fault (may not be engaged)
6=Right brake fault (may not be engaged)
Any other fault code usually means the electronics or wiring is bad and not worth fixing.

Jan 06, 2013 | Pride Jazzy 614 Hd JAZZY 614HD

1 Answer

Not sure witch jazzy chair i got but the joy stick blink and keeps blinking i have tried pushing horn button twice and also turning it on and pushing joy stick forward waiting for it to beep but no beep....


The jazzy probably has a VSI controller and if it is sleep mode then the lights will scroll rather than blink. Now turn on the chair and see if the blinks have a pause between them, ie 4 blinks pause 4 blinks pause etc If they do count the number of blinks and this will give you the error code ie 4 blinks right motor 3 blinks left motor your owners manual should have a chart listing the error codes If not you can contact Pride tech support @ 1-800-800-8586 ask for jazzy tech support

Hope this helps

Feb 17, 2011 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

I just put new batteries in my Jazzy 1113 and the lights on the controller just blink and will not come on. Is there any thing else I need to check?


Check this website to find the type of controller your scooter has. The number of blinking lights will give you an idea as to the the problem is. You may need to reset the system after replacing the batteries. Check your manual for troubleshooting diagnostic codes.
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Good luck!

Oct 10, 2010 | Pride Jazzy 1113 Power Chair

1 Answer

Chair no longer charges, no flashing or blinking, lights,


The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

May 07, 2010 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

Looking for a weather cover for my Pride Jazzy 610


A good substitute, and cheaper than buying it from Pride is to go to WalMart, etc and get a cover for a bbq grill.

May 30, 2009 | Pride Health & Beauty

Not finding what you are looking for?
Pride Jazzy 1103 Ultra Indoor Power Wheelchair Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

Colin Taylor

Level 2 Expert

346 Answers

Are you a Pride Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...