Question about Toshiba TLP-S10 Multimedia Projector

1 Answer

What is wrong with my tlp s10 it gives the entire picture a blue tint the lamp has done 2700 do I need a new bulb

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 64 Answers

Check the Video cable that feeds the projector, could be a broken cable or a pin bent -worst case the connector on the projector has broken.
Try the VGA cable on your computer screen.
The lamp does not need replaceing, the lamp emmits white light only.

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 50ml6200 magnavox. I have changed the bulb twice and tv had worked fine. Recently had our floors done and had to move tv out to shed for a couple of days. Brought tv in worked fine. Needed to move...


the tv got dust when placed out say u need to clean the inside of the light engine, the lamp too but be careful u must use only methylated spirit with a new soft dry bristle brush caution if u touch the lamp with your hands u will shorten its life. the color wheel inside the light engine needs to be cleaned the same way too make sure u do not spill any thing in the components and of course the tv must be off nand left to dry before restarting

Jul 08, 2013 | Televison & Video

3 Answers

Image


It maybe a filter problem go through the steps you took when installing the new bulb and check all then test.

Thanks J

Feb 03, 2008 | Toshiba TLP S30 Multimedia Projector

1 Answer

Panasonic DLP TV has huge yellow blotch covering most of the screen


SET uses a optical light engine--lamp which is quite hot shines into the engine---blue is first to get the light and heat and is usually first area in the lens and baffles to get damaged(loss of blue leaves red and green which equal a yellow screen.

You have a damaged light engine.

Apr 23, 2012 | Panasonic PT-43LCX64 43" HDTV

1 Answer

My TLP-S10 lamp will not stay on after a couple of moments.


Is the fan working. Check fan. Very likely the device overheated. If fan is working the air filter might need to be cleaned. See you manual how to clean filter and reset the filter cleaning counter so that the device can work properly again.

Feb 17, 2011 | Toshiba TLP-S10 Multimedia Projector

1 Answer

My tv has a yellow, green or blue tint to it. We think it needs a new picture tube. Do you think that is the problem and if so is it easy to do myself


Hi,

You have Light Engine Failure. Only fix is replace the Engine. Here is a Page that shows Hitachi LCD Projection TV Optical Engine Faults.

Check for these faults before spending money on a failed bulb. Here is page with all Hitachi TV Lamps and Bulbs.

Feb 11, 2011 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

How to reset the bulb timer for TOSHIBA TLP-XD2000


The booklet that comes with a new lamp specifies the following for the TLP XD2000. While holding down

Mar 12, 2009 | Toshiba Office Equipment & Supplies

1 Answer

Bulb Replacement


the bulb hot indication has nothing to do with the lamp counter.u would have reset the counter as suggetsed by the manufacturer,
this problem is because of the following:
1) wrong bulb
2) cooling fans not working adequately
3) defective ballast
check the above for a solution

Jan 08, 2009 | Toshiba Replacement Projector Bulb...

4 Answers

The projector lamp does not turn on


I have done this on several of our PT-LB50U's with sucess every time.Remove lamp cover and lamp.Then remove top of case by removing 6 screws on bottom.Remove metal shroud that would cover lamp 2 screws and remove 2 screws that hold lamp plug and move it away.You will see a little blue lever for saftey switch move it back and forth from top and bottom put back together and should turn on.

Jan 03, 2009 | Panasonic PT-LB50U Multimedia Projector

2 Answers

Blueish tint on picture


no... lcp panels will look different when going bad ! this is the polarization filter, most of the time the one BEFORE the lcd panel (blue in this case). these should be cheap but are not easy to get...so you might pay quite a lot. you can also buy polarization filter sheets and cut them to size. keep in mind to check for the right orientation !

Aug 21, 2007 | Panasonic PT-AE700U Multimedia Projector

Not finding what you are looking for?
Toshiba TLP-S10 Multimedia Projector Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

628 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

103 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...