I am looking for a charging chart - Heating & Cooling

Hi,
A well-selected Gantt chart template in Excel will really help you visualize your project's deliverables and schedule in a simple way.

From my private experience, such a template is a good way to show all project dependencies, progress, and significant events on a pretty clear horizontal bar chart. Each type of work may require different templates, but basically, they look similar.

Here's a brief list of sites where you can get an awesome Excel Gantt chart template (free or easy-to-implement):

https://ganttpro.com/gantt-chart-template/
https://www.orangescrum.com/free-excel-gantt-chart-template
https://www.hubspot.com/business-templates/gantt-chart
https://www.smartdraw.com/gantt-chart/gantt-chart-template.htm

Hopefully, these carefully created templates will fit your project and lead it to success.

what vehicle do you have?

The battery is probably defective. Look at the chart on the charger to see if there are indicators telling you the condition of the battery.

68 to 72 pounds depending on the ambient temperature. You should get at least 18 degrees difference between your return and supply air.

Google the refrigerant type your installing
& look for a pressure temperature chart
No Freon That is a Dupont trademark & I looked
at their site last week & didn't see it used any more.
You should provide the refrigerant type & you would have
someone give you the answer ,that has a chart or works
with that equipment
R22 is not made anymore & there is a replacement,like
everything else that goes away thanks to the Govt

charging scale for an evaporative wtf?? Look up a conversion chart and convert lbs to kgs or go buy a new scale...

Keep looking for the access on the high and low side. Some of the valves look a little different but you should be able to find where to hook the gauges. R12, R22, and 134a all charge the same way and use the gauges and hoses. just make sure you have pressure temperature chart.
I hope this helps

Check to see if this is a power issue by connecting to shore power and fully charging your batteries overnight with instruments off. While still connected to shore power, with batteries fully charged, turn on C80 navigation system. If the loading screen comes on and does not reset, then try holding down the button immediately to the right of the red power button for at least 3 seconds to see if the system re-boots.

You can look up a pressure temperature chart on the web I am sure and without knowing the temperature where you are I can not give you a pressure for 410a. Look up the chart and find the temperature and pressure that corresponds to the temp if that is what the pressure is then the charge is good.

Hi,

please take a look at this Dock Compatibility Chart.

Here you found the name of the adapter if you need one.

The adapter can you buy as a sparepart at kodak.

Call the 1-800-235-6325 to order the sparepart.