Question about Creative Labs Inspire T5400 Computer Speakers

4 Answers

I cannot seem to get the driver working on my new computer which has windows 7 currently. Are the two compatible?

Posted by on

Ad

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 700 Answers

Are we looking at this same computers? Since when do you require drivers for speakers?!? Speakers are dumb devices (yes, this is correct name for passive computer devices) and do not require any drivers in any computer or operating system with sound capability! Computer speakers are compatible with any copmuter in the world and any operating system which generate sound!

These speakers are qualified as 5.1, that meant that these speakers will have front bass, front centre speaker, front left and right speaker and rear left and right speaker, in total six speakers.

Please follow this advice and you will have joy of surround sound.

1. Mount your subwoofer in front centre, below your knee level at the distance of about 2 of your hights
2. Mount your centre speaker in the centre on your head/hight level or slightly above at same distance as subwoofer or slightly closer.
3. Mount left front speaker about 45degree from your centre line to the left and right same distance to your right, on the level of your head while you are listening to the music, distance from you slightly closer (about 1/2 your hight) than your centre speaker.
4. Mount your rear left and right speakers at same or slightly greater distance as front left and right speaker. these should be at same or slightly higher level as front speakers.
5. Triple 3.5mm jack is going to your computer output and your speakers (incidently, your subwoofer servers as junction box, amplifier and mixer).
6. Connect speakers to they respective jacks.
7. Turn power on speakers all way down
8. Connect power to the speakers and switch it on
9. Play some music on your computer, output on full, music recommended will be some classic, like bach or similar
10. Put your hand in front of subwoofer and turn bass till you feel vibration
11. Turn sound till you hear it well
12. Turn sound on the computer down till about 70% - 80%
13. Turn on sound on your speakers till desired level and enjoy the experience!

If you have still some problems, these can be then related to the drivers installed on your computer, please check therefore what motherboard do you have, if there is proper sound drivers installed. If not, go to the site of our motherboard/sound card manufacturer and install relevant drivers.

Please do not hesitate to ask me if you have any addtional problem related to this particular issue.

Posted on Aug 07, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

I had to get computer makers tech support in on it.

Posted on Aug 07, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 121 Answers

I checked on Creative's website but unfortunately your specific model was not listed. Although it did state that some products would work with native Windows 7 drivers others would require a specific driver from Creative. Here is the link to the site with new drivers

http://support.creative.com/KB/showarticle.aspx?sid=61105&h=13

Posted on Aug 06, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,234 Answers

No , Try To detect your computer drivers and select you system

click the link below :


http://www.touslesdrivers.com

Posted on Aug 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is the Pandigital SCN02 Photolink One-Touch Scanner compatible with Windows 8?


Are you using it currentrly? What is your current Operating System? I've been searching and can't see anywhate a windows 8 driver for this scanner.
Bu let me tell you, I'm using currently a Genius ColorPage, originally released for windows 98. Installed windows 2000 driver in compatibility mode for findows XP. There is no driver for Windows XP nor for Windows 7 and coldn't make it work in Windows 7. So I run it on a computer with dual bootWindows XP / Windows 7.
When I need to scan, I simply start up as windows XP. When finished scanning, reboot to windows 7
I Have Windows 7 on a 2 Tb HD SATA and Windows XP on 200 Mb IDE. Is more economical to have a dual boot then buy a new Scanner.
If your scanner won't run on windows 8, install on another HD or a partiton, Windows 7. doual boot Windows 7 / 8 work like a dream.

See comments for this scanner in Amazon;


Amazon com Customer Reviews Pandigital SCN02 Photolink One Touch Scanner...

Jun 11, 2015 | PANDIGITAL Office Equipment & Supplies

1 Answer

No working windows8 driver


Being a new OS the drivers are available for older systems or devices, sometimes you can use win 7 drivers 32 or 64 bit. The problem may be you have to modify the drivers to work with your specific machine. I had to do the same when I upgraded a Gateway MX6421 (born in 2005) to Win 7 pro N 64bit, I modified a few lines of code in the driver and changed the drivers compatible to win 7.

Nov 03, 2012 | Apevia Computers & Internet

3 Answers

I just bought an hp 2101nw print server and I cannot use it because the driver is not compatable with windows 7 and it seems that hp has no driver software for windows 7 for this print server. Is there a...


If the OEM is not making a driver then your probably out of luck. You may have to go back down to Win XP or sell or return the item. Not all manufactures have caught up with Win 7 drivers so you need to make sure there is a driver for the equipment you purchase.

Apr 27, 2011 | Office Equipment & Supplies

1 Answer

F5d5050 Belkin USB 10/100 Ethernet Adaptor - Does it work with Windows 7 64 bit OS? I have spent hours trying to install a Swann and a Digitech product but none seem to work with the above OS. Any...


Hi,

You cannot install this adapter in a Win 7 computer because the drivers are not compatible with Win 7.
So far Belkin haven't updated the drivers for win 7 OS. The latest drivers for this adapter is compatible only with

" Windows 98SE, Windows Me, Windows 2000, Windows XP 32-bit, Windows Vista 32-bit "

Click here to see the belkin compatible drivers in the website.

With Regards,
Prema.

Jan 06, 2011 | Belkin Ethernet Adapter F5D5050 Network...

1 Answer

Not compatible with my current version of windows what do I need to do?


Not compatible or not working well with windows 7?
(making a program work with windows 7)

Maybe, It doesn't work because the driver/application you installed is for other versions of operating system. I am also using windows 7 like you so don't you worry, You can still use your old installer/driver from other versions of operating systems. Just remember that before installing any program in a windows 7 Operating System Computer, Use "troubleshoot compatibility". Right Click the Icon of your program installer/application first, then choose "troubleshoot compatibility". This will allow you to choose on what type operating system your program will run. Just reply back if it still doesn't work.:D rate and vote for me:)) julyallan01_52.jpg

Oct 24, 2010 | Macmillan Holy Cow! 250,000 Graphics Full...

4 Answers

Drivers


I will recommend that you download and run the free Windows 7 Upgrade Advisor. It helps find issues with your computer’s hardware, devices that might affect installing Windows 7. Go to the Windows 7 Compatibility Center find direct links to drivers, updates, and downloads.

Apr 04, 2010 | Toshiba Satellite A300-ST6511 Notebook

1 Answer

Need a better driver to work with Windows 7


have you tried primo pdf ? http://www.primopdf.com/index.aspx This may solve the pdf printing problem.

Feb 10, 2010 | HP LaserJet P2015d Printer

1 Answer

Not compatible with new computer windows 7


Not compatible or not working well with windows 7?
(making a program work with windows 7)

Maybe, It doesn't work because the driver/application you installed is for other versions of operating system. I am also using windows 7 like you so don't you worry, You can still use your old installer/driver from other versions of operating systems. Just remember that before installing any program in a windows 7 Operating System Computer, Use "troubleshoot compatibility". Right Click the Icon of your program installer/application first, then choose "troubleshoot compatibility". This will allow you to choose on what type operating system your program will run. Just reply back if it still doesn't work.:D rate and vote for me:)) julyallan01_52.jpg

Jan 24, 2010 | Microsoft Wireless Laser Desktop 4000...

2 Answers

I just put windows ultimate on my old hp laptop that initially had windows 7 and everything seems to be fine apart from the audio. At first i thought that it was the drivers but after installing the hp...


This sounds like a Compatability issue with Windows 7, check with HP to make sure your machine is compatable. You may not be able to use windows 7 on your PC. Make sure the drivers you have downloaded are the correct ones and are listed for Windows 7, vista ones should work but may not. Xp ones will definately not work

Dec 03, 2009 | HP Compaq nx9030 Notebook

Not finding what you are looking for?
Creative Labs Inspire T5400 Computer Speakers Logo

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

620 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...