Question about Icon Epic 450 MX Treadmill EPTL09605 !

1 Answer

My incline stopped working a few weeks ago. Now I have another problem, I turn it on and the belt starts then stops.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 218 Answers

The motor controller weakens over time because of the excessive amperage draw of the motor do to lack of lubrication (which wears the walk belt and walking deck).

Take an amperage reading of the motor it should be 2-3 amps with no one on it, with someone walking on it it should be around 6-12 amps. I would bet yours is elevated above 6-12 amps.The controller is dropping output because of the friction problem.

The first thing to try after testing the amperage is to lubricate the walking platform. Then retest and see if the amperage comes down and it doesn't shut off.

If it does then the next step would be to replace the walking deck. If the amperage still is up you may need to replace the walk belt second and finally if after replacing the deck and belt, if the unit is still shutting down replace the motor controller.

Posted on Aug 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, can you advice me how to repair treadmill? We bought Power tech olympian treadmill week ago and it doesn't work properly. The running belt is not going fluently, and we think there can be something...


Hi! I think u shouldn't tamper with it coz its too soon take it back to where u bought it so they can chek it out for u it still has gaurantee coz its not even a month

Nov 17, 2014 | Exercise & Fitness

1 Answer

2005 GMC Savana 1500 electrical problems,acceleration


sounds like the BCM is going out on your vehicle .

Mar 03, 2017 | GMC Cars & Trucks

1 Answer

Treadmill INCLINE DOES NOT WORK?!?


Is it new? If so you need to call the manufacturer. If it is not, call Treadmill Doctor at 800-750-4766 and have you make, model and serial number of the treadmill ready so that they can diagnose it.

http://www.treadmilldoctor.com/?utm_source=fixya&utm_medium=cpc&utm_campaign=mendi

Jul 04, 2012 | Reebok Exercise & Fitness

1 Answer

I have an Amana model NDG7800AW. A few weeks ago


The roller to the belt tensioner is binding causing to make the warbling noise.The bearing needs to be replaced which comes with the roller. A new belt is advisable as well when replacing. The stalling problem could be also from the belt being stretched or the timer relay is weak

May 01, 2010 | Amana NDG7800AW Gas Dryer

1 Answer

Replacing power steering belt for 98' eclipse rs -


if i remember right those belts are not together cuz your car has two belts on it one that goes from the crank pullel that runs the a/c and alt and then one thats from the crank to the power steering

Jul 27, 2009 | 2001 Mitsubishi Eclipse

1 Answer

Car won't start.


sounds like the fuel filter.. if you have those kind of skills, they're usually cheap to buy and worth a shot to change. depending on the location the labor will take you 1 - 5 hrs...

May 02, 2009 | 1997 Honda Prelude

1 Answer

Please help


it is the timer or, it may be a short of some kind

Apr 19, 2008 | GE WDSR2080D Top Load Washer

1 Answer

Turntable won't turn


Hi , unscrew the cover check belt are tear / if tear replace belt , lose the belt tensioner if it has , if not just install incline belt into vevil of pulley.

Jan 15, 2008 | Kenmore 63252 Microwave Oven

2 Answers

Miele T220 drum doesn't turn


sounds like belt may be slipping .. check idler pully for tightest against belt .. belt may be streached and need replacing

Oct 14, 2007 | Miele Novotronic T220 Electric Dryer

Not finding what you are looking for?
Icon Epic 450 MX Treadmill EPTL09605 ! Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Icon Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers

Are you an Icon Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...