I have a HY-013 TGT fan stopped blowing air --- oscillation still works, can it be fixed or is one of those once broken through away. email: [email protected]

Question edited for clarity.
Question moved from Laundry Dryers.

There is a gear stuck or broken. It needs stripping and cleaning. Videos that should help.

https://www.google.com/search?q=allaire+no+16+fan+not+oscillating

..

most likely it is covered under manufacturers warranty
https://www.lasko.com/resources/warranties/

suggest checking with Lasko first as any attempt to repair it could void the warranty it still might have .

Check that nothing is blocking the fan from turning then check across the wires going to the motor with a volt meter I presume you should have 120 volts or close . If you don't have the volts, check that you don't have loose wires or not connected.if wires are ok use ohm meter & check for ohms across the motor wires a double check before buying a motor if you don't have ohms replace motor . Hope this helps .

bad or binding gear or damaged bracket with the oscillating mechanism

Sounds like the fan motor is the problem

The blades are probably covered in dust. Mine does this when it needs cleaning

You can replace the control arm screw with a longer one of the same diameter and thread pattern.The longer screw will catch the base and allow proper oscillation motor to catch the base.

Take the power chord out from the mains plug. There will be 2 or 4 screws at the base. Take these off and you should be able to pull the cover out.

Lead blower

HONEYWELL HY-108 TOWER FAN WILL NOT POWER UP.