Question about Lands Phones

2 Answers

My Bel-tronics ltd. AD100 stopped functioning. Did have a strong storm come through. Want a replacement. Where can I get a replacement?

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers


Referring to Raymond1538's post above, I sold out of all of the New-In-Box (NIB) B.E.L-TRONICS, LTD. AD100 Caller ID Boxes I had intended to sell over six months ago. I planned to keep two in reserve for myself, as this unit hasn't been made in over 20 years and NIB units are, otherwise, nonexistent. My working unit has been soldering on for over 25 years, and I couldn't live without the 100 number blocking feature it offers.

I sold the last two units I had intended to sell to a gentleman in DC for $350 a piece (prepaid, plus at-cost shipping), and he was quite happy to have the opportunity to acquire two NIB units. A month later, a very persistent individual from Saint Louis finally persuaded me to part with one of my reserve units by offering me $500 (plus shipping).

I, now, have only one (1) NIB unit left to my name and it may very well be the last NIB AD100 on Earth. I always intended to have a backup unit, so I have no particular motivation to sell it. However, if someone wants one badly enough and is willing to make me an offer for substantially more than I got for my next to last unit, I will certainly entertain their offer.

Please, do NOT flame me if you don't think a unique and rare piece of telephone electronics is worth what I'm asking. If you're willing to settle for a used unit that's been in service for 20 or more years, just check the eBay ads, as one comes up for sale every now and again. But, mine has everything in the box as it came from the factory and is virginal . . . no plug has ever been inserted into it! The used ones offered on eBay can't make that claim.

If you're interested, I can be reached at DadCat1(at)

Posted on Dec 05, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just bought one from a guy out east I think he has the only 3 left in the world it was spendy but I wanted it, my other one lasted 18 years before lighting got it here is his e-mail address ( like I said it was spendy $125 with shipping and fed ex but you pay for what you get. and it is new in the box.


Posted on Sep 09, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Bel super wide band with laser plus is it to old to work now

you probably cant find a manual for this online since it is so old and it just not working because it is old and has not been used for years

Feb 22, 2018 | Bel-Tronics Direct Wire Power Cord

1 Answer

How do i get my WR 100 to stop squeaking durring a weather emergency?

Have you tried tuning to different NOAH frequencies to see if one of them gets better reception? Also, if the radio is close to other electrical devices, they could be causing interference with your weather radio reception.
Just a couple ideas tossed out there.
Good luck.

May 10, 2012 | Midland WR-100 Weather/RDS Radio

1 Answer

I have a nordic track 4100i treadmill.

1) Faulty sensor speed try to adjust it face to face magneto motor
2)Sensor speed try to tight the connector very well.
3) Replace if neceesary.4) Main motor faulty or burn. Test 115vac for input measure without load fore easy running.
5) Test the main motor controller board for 115vac input and output for +5VCD,
6) Adjust the deck bel for 2-3" for lift max.
7)Lubricate the deck bel.
8) Test the transformer for input and secondary voltage.
See the block diagram for illustration how the main motor controller has 90% aprox of function of any treadmills.

sincerely. Merry Christmas.

ernesto cuadra
managua, nicaragua. c.a.

Dec 20, 2011 | Nordic Track Nordictrack Apex 4100i...

1 Answer

Owners manual for a Bel-Tronics radar dector # F176826

try this site

Sep 23, 2010 | GPS

1 Answer

Does anyone have an idea of what a fair price would be for a NIB B.E.L-TRONICS, LTD. AD100 Caller ID Box?

Put it on eBay and see what it fetches. That will be the going price. You will also probably sell it so you will be killing 2 birds with one stone.

Sep 12, 2010 | Lands Phones

1 Answer

Belling BEL-CJ/SS25 microwave

My Belling BEL-CJ/SS25 Microwave / oven / grill has recently developed a problem. Every time I close the door the turntable starts rotating, even when I'm not using it. It doesn't make a noise, and doesn't seem to be going into any cooking setting, and the light doesn't come on, but it turns until I open the door, when the light comes on and the turntable stops turning. This has only recently started happening, and nothing else seems to be wrong with it, Is this safe or should I get rid of it and buy a new one. The guarantee has expired so repair may be cost prohibitive.

Sep 04, 2009 | Microwave Ovens

1 Answer

92 saturn sl squeals and loses power

the shift to d2 light comes on when batt. voltage gets low enough that all of the sytems can not function properly. the noise is your bel slipping, your battery looses charge and shift to d2 light comes on to tell you to leave trans in drive 2 so it dose not have to use batt voltage to shift. replace your belt and tensioner if your alternator is ok.

Mar 24, 2009 | 1992 Saturn SL

1 Answer

Front blwer stopped functioning after an ice storm

The same thing happened to me. I replaced the blower resistor, and everything is back to normal. This is something that is easy to replace it is located behind the glovebox. There is two elec. connections and two screws to remove. Put in the new one and your done. You do have to purchace the part at the dealer though. I think I payed about $25.
Hope this helps

Jan 09, 2009 | 2005 Chrysler Town & Country

1 Answer

Does the bel 980 need to be upgraded ??

BEL no longer offer upgrade or repair for the BEL 980 detector

May 27, 2008 | BEL 980 Radar Detector

2 Answers

Key tronic wireless mouse quit working

Sounds simply broken to me. Time for a new mouse.

May 23, 2008 | Key Tronic UNPLUGGED PS2SB01...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Cindy Wells

Level 3 Expert

5528 Answers


Level 3 Expert

81400 Answers

David Burbee
David Burbee

Level 3 Expert

1871 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides