Question about JCPenney All-in-One Nursery Crib
I have an "all-in-one" nursery by Rockland. I can't find the instructions that came with it, and I need to convert it to the toddler bed
I finally found my instructions!! It's actually really easy to convert to a toddler bed:
Step one: Take out four screws (two on each side) of the front railing and top bar. They are the screws holding the front railing and the top bar to the side of the crib and the dresser.
Step two: Lower the mattress to the lowest setting.
Step three: Place the toddler bed railing in place. It can go either way depending on which side of the crib your toddler sleeps. We put the taller part of the toddler railing closest to the dresser because that is where our son's head usually is.
Step four: You'll need 4 1.5 inch hexagonal screws to screw in the toddler railing. After 2.5 years, I could only find two of them, so I used two 1.5 inch regular screws that came with the crib. On the taller part of the toddler railing -- the screws go into the 1st and the fifth holes. On the shorter side of the railing, the screws go into the 3rd and the 5th holes.
That's it.. You've now got a toddler bed!
Posted on Jan 10, 2009
Tips for a great answer:
Aug 04, 2014 | Rockland Hartford Convertible Crib -...
Sep 17, 2011 | JCPenney All-in-One Nursery Crib
Apr 18, 2011 | Storkcraft Baby Aspen - 4 Piece Nursery...
Mar 14, 2011 | Sorelle Tuscany 1050 Crib
Dec 14, 2009 | Graco Lajobi Kendal Convertible Crib
Jan 20, 2009 | JCPenney All-in-One Nursery Crib
Jan 10, 2009 | JCPenney All-in-One Nursery Crib
5,192 people viewed this question
Usually answered in minutes!