Question about AEG 23 in. Favorit 50750Vi Built-in Dishwasher

1 Answer

My AEG Oko Favorit 50750 VI built-in dishwasher has been unpredictable for a few weeks - sometimes leaving things dirty although I've run cleaning programmes and replaced the filter basket thingy - but today I have a power light on but no other lights - no programme lights and no 'end' light either. Not sure if it finished the last cycle or not. Desperate not to replace as cash is tight - is there anything obvious I might check please? Thanks..

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,513 Answers

Hi

Most probably the door catch switch or the on off button is bad.
Please check the link bellow..

http://www.partselect.com/dishwasher+dishwasher-wont-work+repair.htm


Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In which way can i reset my dw AEG favorit F 65450 vi?


Hold and press the end cycle by 5 seconds, and try again. However you can disconnect the c.breaker by 5 seconds too. and try again.
Merry Christmas.

Dec 19, 2013 | AEG 24 in. Favorit 86050Vi Built-in...

1 Answer

Aeg oko favorit 40300 service manual


AEG OKO FAVORIT 40300 When switching dishwasher on no water is flowing into the the dishwasher

Please help

Jan 11, 2012 | AEG Dishwashers

1 Answer

In which way can i reset my dw AEG favorit F 86050 vi?


There are 6 program buttons on the right side of the On/Off button.
Press and hold button 1 2 ( 70

Sep 04, 2010 | AEG 24 in. Favorit 86050Vi Built-in...

1 Answer

We dont know how 2 turn it on just moved house n no instructions aeg oko favorit dishwasher


Looks like what you need is available at

http://www.serviceforce.co.uk/pdfs/U20206.pdf

Good luck with the new house. Hope the dishwasher works well for you.

Try to run it with dishwasher cleaning kit (no utensils) to make sure everything is clean - that way you will get more life out of it. The cleaning kit (usually Finish) is sold in the supermarket in the detergent section.

Jan 31, 2010 | AEG 18 in. Favorit 54750Vi Slim-Line...

1 Answer

AEG OKO FAVORIT 6050 trips earth leakge


This is typical of a water leak onto electrical connection OR the electrical element has shorted internaly . Check this with a Ohm meter and itshould show the problem

Dec 20, 2009 | AEG 24 in. Favorit 60830 Free-standing...

3 Answers

The drain pump on the AEG oko favorit 6050 keeps running even when the on/off switch is off or the door is open.


Empty all the water from the salt resevoir, (I used a turkey baster), then rock the machine backwards and forwards a few times and empty the last few drops from the resevoir again.

Oct 17, 2009 | AEG Favorit 50500 Built-in Dishwasher

1 Answer

Aeg favorit 86070 vi fully integrated dishwasher started bleeping with 3 short bleeps 2 months ago. I followed instructions internet and shook dishwasher to one side and it worked for about 8 weeks. Now...


This is typical of the anti-flood circuit that opperates once it detects water on the base of the machiene and is a polystireen float that activates a micro switch. This puts the machiene in pump out mode only. You need to determine if the water at the base of machiene is caused by a small leak or is it a customer spillage. Clearing the water (tip to side) or dry with paper towel and inspect for leaks. Rectify the leak and this should solve the problem.

Sep 09, 2009 | AEG 23 in. Favorit 86070Vi Built-In...

3 Answers

Drain pump keeps running AEG oko favorit


This seems like the anti flood system (polystireen float / micro switch) at the base of the washer is triggered,\. This puts the washer in pump out mode and stops inlet of water via the inlet solinoid. Dry the water on the base and then check for any water leaks. (pipe leak

Aug 29, 2008 | AEG Favorit 50500 Built-in Dishwasher

Not finding what you are looking for?
AEG 23 in. Favorit 50750Vi Built-in Dishwasher Logo

Related Topics:

443 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Dishwashers Experts

paulcarew

Level 3 Expert

2519 Answers

Kolbrun...

Level 3 Expert

1205 Answers

Mike

Level 3 Expert

4340 Answers

Are you an AEG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...