Question about HP Officejet Pro 850 InkJet Printer

1 Answer

Only one color is shown, blue - HP Officejet Pro 850 InkJet Printer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 47 Answers

Then your other color may be low, or the cartridge is faulty or your ink station is not recognizing the ink, this you should refer to the vendor as your printer may be under warranty and it can be replaced with a new printer

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The image color on projection is not the same as shown in laptop. There's is no red color.


It could be a broken connection in the computer lead for the red signal, or a fault on the projector that the red panel doesn't work any more.

To diagnose, bring up the projector's on screen display. If there's white in the menus then the problem is the cable. Replace it with a new one. If the menus are affected too then it's a projector problem. This requires the attention of a service engionner.

Aug 20, 2014 | Toshiba Tdp-s25 1080i 720p Hd Dlp...

Tip

Repair job update


Update
A number of people have commented that after changing the color wheel, their red and blue colors are reversed. This is a different color wheel and a newer model set than is documented here, but, some report that by removing a jumper on the color wheel, the problem is resolved. The jumper is as shown in this picture, below the yellow/white label.

color-wheel-jumper.jpg

on Mar 30, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer

Danco instructions


Umm, yeah I think so....

Nov 10, 2013 | Danco Home

1 Answer

When i starts my moniter it gives first blue color and continously gives different color.After some time it goes all red color


There are several reasons it could have shown itself, the most common is the installation of a driver or other program onto the computer. Several times when Windows updates itself automatically it will download certain drivers, and that could be the culprit (I never did like windows).
After that, if you still receive the Blue Screen, then the drivers might have corrupted the operating system itself. That means one of two things. We either have to 'repair' windows, or completely reinstall it.

Feb 24, 2010 | Computers & Internet

1 Answer

Override color shown in text


No can do, your printer uses all cartridges for all prints.

Jun 18, 2009 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

My monitor Model: SAMSUNG SyncMaster 551s Problem: Whend switch on my pc, monitor does not on properly. But when it on, shown different color, like as green, red, blue, black etc. It on for the sometime...


First try with the reinstallation of the drivers.
If it won't works there may be a problem in hardware.
mostly with the picture tube.

Hope this helps.

Feb 01, 2009 | SAMTRON 55V 15" CRT Monitor

2 Answers

CRT monitor becomes yellowish..


When any dust goes inside your monitor .......you will get these things.......... remove it , it will work fine

Jan 12, 2009 | LG Studioworks 45 14" CRT Monitor

1 Answer

I only see red blue and green on my Tv


repkace your convergence units that should do the trick cost is about 50- 75 dollars

Oct 22, 2008 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Light blue lines in the color pages


Yes :
You should replace the PCU if prints show any of the following symptoms.
  • Colors are missing, faint, or partially blurred.
  • Toner smears appear.
  • White or color rivers appear.
  • White or colored streaks appear.
    1. Important: Switch off the device and disconnect it at the mains.
    2. Open the right side cover.
    3. Pull the green levers as shown to release the inner cover.
    4. Lift the inner cover upwards.
    5. Squeeze the green lever on the black PCU.
    6. Pull the unit carefully out of the device and dispose of it in accordance with your local environmental policy.
    7. Place the new PCU on a flat surface.
    8. Peel off the tape from around the new PCU.
    9. Remove the top cover from the PCU. DO NOT remove the bottom cover at this stage.
    10. Rest the new PCU in the device as shown.
    1. Push the PCU into the device while holding the bottom cover. You will hear a click when the PCU has locked into place.
    2. Lower the inner cover.
    3. Push the two green levers as shown to secure the cover.
    4. Close the side cover.
    5. Connect the device at the mains, switch it on and wait for the self-test operation to finish.
    6. Please remember to rate all users who assist you for free :)

Sep 07, 2008 | Ricoh Aficio CL3500N Laser Printer

Not finding what you are looking for?
HP Officejet Pro 850 InkJet Printer Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...