Question about Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Kenmore Oasis HE Washer

Problem started with error code sd. Towel load wet, no spin. Tried to run load again on cold, washer filled to top of tub. Stopped, tried to empty water, took out towels after error code LD. Still full of water
Any suggestions for getting water out? Washer under warranty, tech coming soon.

Posted by on

  • 2 more comments 
  • Tech Chick32 May 15, 2008

    To anyone who cares, I have the Oasis HE Elite and a similar situation. My 13 year old son washed a load and soon after the washer would not spin. I had a few error codes, F1 and Sd or 5d as the washer displays. Couldn't figure out the issue as the washer would mostly wash but stop at the spin cycle and the load was wet, so I called Sears. For $68 they came out, ran diagnostics, initially the tech thought it needed a part so he went to his truck and realized he didn't have it. Called a partner who told him he had seen that problem before...an item of clothing may have somehow gotten in between the washer basket and the inside of the washer. As luck would have it, he removed the lid and my sons gym shorts were nicely tucked in between looking quite icky I might add. He used my clothes hanger to remove them, then closed the lid and ran a test cycle and sure enough, we were back in business...for a total of $118 for his time and service call. I'm just happy to have clean clothes again!

  • Anonymous Mar 23, 2014

    tub will not spin evenly

  • Anonymous Mar 24, 2014

    Washer squeals very loudly until water fill stops.changed out hoses.sound changes when water valve is turned down

  • Anonymous Mar 24, 2014

    The washer runs for a little while then the error code F70 comes on and water runs out

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Problem started when washer started itself up twice in the middle of the night....after that the washer seems to have problems figuring out what it wants to do...when running a wash it will start, run for 2 minutes then start scanning numbers...it does not land on a code...it will spin, stop, start...sears has replaced the mother board 3 times....and we will be phoning them again as it has not fixed the problem..one other time it did not spin properly and clothes were wet...we have a dedicated surge protector on it...we have had our electrical checked and no problems there...sears confirmed that as well..the techs have given up on it and don't know what to do with anymore...it is still under warranty and now costing sears more to service it then replace it....time for them to do the right thing and "take it back"...very disappointed in this washer...wish me luck when i call them again...they must be sick of hearing from me....lol

Posted on Apr 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When washer goes into spin cycle it starts to tub starts to bang against side walls and shortly after error out, with an error on electronic display. Kenmore Elite Oasis


either unit is unlevel or one of the tub supports has come disconnected .... these washers have a slanted top lid so you must put level at side of washer on front and both sides and check front to back with level at side cabine seam as your leveling point

Jan 24, 2011 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

I am working on a Kenmore Oasis washer, model


The F50 error code indicates that the RPS (rotor position sensor) detects no motor rotation. Check to see if the basket spins freely. If not, you could have an item caught between the outer tub and the inner spin basket. A toy or other item underneath the washer could also prevent the basket from spinning and would result in this F50 code.

If the basket spins freely, you could have a wiring failure that would prevent the motor from spinning.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question^%$#@

Jun 29, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

My kenmore elite oasis washer model # 110.2703 shows code F-50


The F50 error code indicates that the RPS (rotor position sensor) detects no motor rotation. Check to see if the basket spins freely. If not, you could have an item caught between the outer tub and the inner spin basket. A toy or other item underneath the washer could also prevent the basket from spinning and would result in this F50 code.

If the basket spins freely, you could have a wiring failure that would prevent the motor from spinning.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!

May 25, 2010 | Kenmore Oasis 27042 Top Load Washer

1 Answer

Kenmore elite oasis he top load washing machine f 50 code


The F50 error code indicates that the RPS (rotor position sensor) detects no motor rotation. Check to see if the basket spins freely. If not, you could have an item caught between the outer tub and the inner spin basket. A toy or other item underneath the washer could also prevent the basket from spinning and would result in this F50 code.

If the basket spins freely, you could have a wiring failure that would prevent the motor from spinning.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 18, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Sd error on my top load kenmore oasis


Unplug the washer for 6-8 hours. We were told to try this by a local repair man before bringing the washer in and it worked for us. He said it would reset the washer.

Jul 06, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Kenmore Elite Oasis HE top loading washer model #110.27082602 gives me error code F50 and doesn't spin. Other blogs tell me that it is possibly a main control board. What do you think?


The F50 error code indicates that the RPS (rotor position sensor) detects no motor rotation. Check to see if the basket spins freely. If not, you could have an item caught between the outer tub and the inner spin basket. A toy or other item underneath the washer could also prevent the basket from spinning and would result in this F50 code.

If the basket spins freely, you could have a wiring failure that would prevent the motor from spinning.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 15, 2009 | Kenmore Oasis HE 27082 Top Load Washer

2 Answers

Kenmore Elite Oasis Wash Machine Error Code F54


The F54 fault code indicates that the control board senses high motor current.
This can be caused by excessive friction in the spin basket.
With the washer off, open the lid and see if the basket spins freely.
If not, you may need to remove the basket and check for an item stuck between the spin basket and the outer washer tub.
The second and third images show procedures for removing the basket on the Oasis washer depending on whether you have an impeller or agitator in your model.
If the basket spins okay, then you can follow the technical troubleshooting described in the first image.
This may help you determine the cause of your washer problem.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question



Removing Tub, Basket, lint filter: http://media.fotki.com/1_p,srfssgbktsdgrrqxgtqsskgwtqkq,vi/rstsfdwbbxwwdskwfgkxrrdqddwqb/1/1303472/5961857/image5139789143943268173img-or.jpg

Removing basket & Hub: http://media.fotki.com/1_p,sqgwstkfwtfwsqwxgtqsskgwtqkq,vi/kbkbfbkgwxbfdtwrdxkrkggrdrw/1/1303472/5961857/image27197img-or.gif

Wiring Diagram: http://media.fotki.com/1_p,srfssgbdfbbkfwsxgtqsskgwtqkq,vi/rstkrrqkkxwrtdkbbrbxbqdswfffs/1/1303472/5961857/image3973684248966800668img-or.jpg

http://media.fotki.com/1_p,wktkgtrtsbsgwfrxgtqsskgwtqkq,vi/wrskkfsfrxwwqgrkddg/1/1303472/5961857/image35809img-or.jpg

Dec 01, 2008 | Kenmore Oasis 27042 Top Load Washer

1 Answer

Kenmore Ellite Oasis - model #27042603


The F50 error code indicates that the RPS (rotor position sensor) detects no motor rotation. Check to see if the basket spins freely. If not, you could have an item caught between the outer tub and the inner spin basket. A toy or other item underneath the washer could also prevent the basket from spinning and would result in this F50 code.

If the basket spins freely, you could have a wiring failure that would prevent the motor from spinning.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jun 19, 2008 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Kenmore Elite Oasis TL washer, stubborn Sd code


Found the problem. After removing the back panel, found some garments in the bottom of the surrounding clear plastic tub. These must have been periodically blocking the outflow area and triggering the Sd error code. Fixed it by opening the top components of the washer so I could see down into the surrounding tub from above. Fished out the garments with clothes hangar. Put everything back together and have done six loads with zero problems.

Mar 19, 2008 | Kenmore Oasis HE 27082 Top Load Washer

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5386 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

2mikecurtis

Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...