Question about Rex RX-1804
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Well I'm not sure if this is a solution but, most walking foot machines are either like the Juki 562 or 3 and the Singer 111, 211 or newer models. REX's are particularly original, they should be using a very similar welting foot. Many industrial sewing stores in LA have them.. Kyle
Posted on Apr 17, 2009
No luck findong your but Go to www.reliablecorporation.com. Under products check out the MSK555 blindhem machine. It is the same as the Rex 518. To the right of the page is a category to download the manual. It is very helpful.
Posted on Apr 11, 2011
SOURCE: My dad bought a new
I'm assuming that your talking about the needle bar (where you put the needle in) that doesn't go up high enough. The needle bar has a screw that secures it in place, and if you loosen it you will be able to slide up the needle bar high enough to be able to put your needle in. Now this bar does have a set height that it's suppose to be, so you'll have to set the timing of the needle bar when you loosen the screw. Loosen the screw, move the needle bar up enough to so you can put a needle in. Set it on wide zig zag. When the needle is on the up stroke the hook tip should pass behind the needle just above the eye of the needle. The hook is the piece the the bobbin case mounts on. If the hook tip faces to the right you have to time it with the needle on the right swing of the widest zig zag. If the hook faces to the left, just the opposite.
Posted on Apr 22, 2011
Tips for a great answer:
on Jun 18, 2011 | Rex RX-1804
Jan 08, 2015 | Rex RX-1804
Aug 31, 2011 | Rex RX-1804
Apr 08, 2010 | Rex RX-1804
May 29, 2008 | Rex RX-518
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: