Question about Philips Lands Phones

1 Answer

I have a SKPE Phillips phone VO1P8411B/37. In an effort to fix the phone I de-registered it. When I select REGISTER, it comes back with 'Registration failed'. I tried to put in the default code of 0000 but there is no ENTER message to enter it into the system. How can I register the phone?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 12,061 Answers

Firstly, unplug the base unit, then remove from this base unit the ethernet cable and most importantly, unplug the telephone line! Then remove the batteries from the 2nd handset. Keep everything unplugged for a few minutes, then plug the power into the base unit, wait 1 minute, then plug in the Ethernet cable and wait 5 more minutes. Do NOT plug in the telephone line just yet. After the 5 minute wait, put the batteries back into the 2nd handset and then follow the registration instructions from the manual (copied below)...

Make sure you have configured the language, country code, and area code of your
phone before registering additional handsets.

1. Press "Reg.". Register shall be highlighted.
2. Enter the system PIN (Default: 0000). Use "Clear" to correct typing errors.
3. Press "Enter" to confirm.
• Your handset starts searching for the base.
4. Press the top button on the base unit until the two indications turn off.

• If registration is unsuccessful, the signal icon displays steadily.

TIP: IF REGISTRATION FAILED, REPEAT THE ABOVE PROCEDURE.

Like other methods, you must hold down the button on the base unit until the lights STOP blinking. When you have successfully registered your 2nd handset, then plug in the telephone line into the base station. I did the above and it worked! The trick is to be patient and wait the few minutes while everything resets itself.

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My V-TECH CS6229-3 phone base does not register the base phone but i can change another phone on this three phone set and it is registered and the phone


Is the handset you are trying to register de-registered? if not it will not register to another base until it is.first de-registered.
To de-register the handset do the following-
With a charged battery in the handset Enter *331734# then without pause Press and Release the Menu Select Button. You will hear a Beep. Handset would then be De-registered..
Then place the handset on the Main Base cradle and follow the instruction that come up on the handset display.if the handset still does not register then most likely the base memory is full and will have to be re-set .
To re-reset the Base:- Remove any handset from the main base cradle. Then Press and Hold the Locator or find HS or handset Locator button until the IN USE light comes on and begin to flash then release it and immediately with out pause press and release it again. That will re-set the base memory. All your handset will then be de-registered and will to be re-registered. Place each handset to be re-registered on the Main Base cradle and follow the instructions on the the handset display and they will register.

Sep 06, 2016 | Lands Phones

1 Answer

There is a message "Searching" on the phone, How do I get it back to working.


You might try to de-register the handset and re-register
it to the base. Be sure the handset's battery is well
charged, a weak battery can impede the registration.

( I ) To de-register the errant handset:

1. Press and hold the [END] and [ # ] keys at the same time until the screen displays
"System Reset, Deregister Handset"
2. press [select]
3. scroll to "Base Unavailable"
4. press [select]
5. display says "Not Registered"

( II ) To register the handset to the base:

1. open the base display's [menu]
2. scroll to "Register Accy."
3. press [select]
4. on the handset, press and hold [ # ] until
the handset display says "Registering"
5. In ~30 seconds, handset display will say
"Registration Complete" or
"Registration Failed".

This is described on page 22 of the manual.
A free copy of the User's Manual can be obtained
at www.manualslib.com .

Good luck!
------------

Jan 15, 2016 | Uniden D16883 Phone

1 Answer

Hi, I have a DECT2085-3 base with 3 handsets. I would like to add another handset. I bought two used handsets and would like to register them to my original base. I am having trouble with the selecti


In the instructions you need to find how you Sync the base and add that number phone to the base. All have different ways so try the company website on google.

Dec 09, 2014 | Uniden DECT2085-3 Trio Cordless Phone

1 Answer

De-register vtech ds6101 handset


Called the manufactuer.... To do this enter on the handset you want to deregister:

*331734# and press (Menu Key# 1 - top uppermost left button that is unmarked).


This will put the handset back into the register mode.



Hope this helps,

James Pavicic Jr

Jul 13, 2012 | Vtech Cordless 6041 Phone

3 Answers

Handset out of range


I'll give it a shot. Have you tried re-regestering the handset? Press and hold down the "end" key (on most models it looks like a red handset) while holding that key down, press and hold the # key, after a few seconds the unit should beep and show:
(SYSTEM RESET)
Deregister HS
BaseUnavailible

Useing the four-way key select "Base unavailable" and press the menu key The LCD display should then show :
"Which Base?"
Base #1

Select base one and then the display will show
"Base Unavailible
Yes
No

Select "Yes."

Your handset is now unregistered. To re-Register the phone to the base do the following. If the base unit has a charging cradle, just set the handset in it and it should register on its own, if you have a cordeed base, or the unit will not register when you set it in the cradle on the base go to menu and select register handset, then press and hold the # key on the handset for 2 - 3 seconds, it should beep and then start the registration process. If you have 6 handsets registered to your base, you will need to de-register teh non-working unit from the bases memrey before you will be able to re-register the handset.

Jun 14, 2010 | Uniden DECT 6.0 Cordless Phone ID

2 Answers

Phillips sa3020/37


Never publicly post your serial number on a forum like this. If I wanted to, I could go to www.usasupport.philips.com , enter that model #, and click "product registration," right now and register that product in my own name.

-Tha Mp3 Doctor

Jan 17, 2009 | Philips SA3025/37 Flash MP3 Player

2 Answers

I want to register my philips go gear 2gb SMALL MP3


call 1.888.PHILLIPS(744.5477) can register there.... or online at phillips... heres the link copy and paste it http://uschat.philips.com/philips/philips.htm?fromsite=philips&model=&uid=1229591100610
there is a spot to click to where you can do what you must do.

Dec 18, 2008 | Philips SA3025/37 Flash MP3 Player

1 Answer

How do i reset philips voip4332b ip phone base unit to company default.


This should solve your problem:

1. On your phone select: Menu > System > Base Select

Select "Auto" and press "ok"

2. On your phone select: Menu > System > Register 
(you might be prompted to enter a PIN if so the default is "0000" )

3. On the base station press and hold down the  "Page" button for 4-5 secs until the green light starts to blink. At this point the phone should be now able to find the base station.

Aug 19, 2008 | Philips VOIP4332B/37 IP Wireless Phone

2 Answers

DeRegistering a Damaged Cordless Phone????!!!!


If you are still looking for an answer on dereg of a handset, the manual says Menu - 0-0-2 then 3-3-5-OK then select the handset you want to cancel/deregister

Nov 05, 2007 | Panasonic KX-TG6074B Phone

1 Answer

Register additional handsets on a Uniden phone


From: Uniden Customer Support

On most models you can find an option in the menu for De-register? In that case you would select that option and select to deregister the handset.
TRU88 models you go to the main menu and go to De-register HS select yes to deregister the Handset.

DCT5 and DCT6 models: Press menu on the handset. Go to System Reset and Press select. Go to Deregister HS and press select. Arrow up to yes and press select. Then go back into the menu. Go to system reset and press select. Arrow down to Replacing the base and press select. Arrow up to yes and press select.

DCT7 models: Press and hold "end" and "#" until the system reset menu appears on the display. Then follow the instructions from above for the DCT5 and DCT6 deregister procedures once your into the menu.

TRU4 and TRU5 models: Press and hold xfer/del and end until "de-register?" appears. Use the plus+ button to go up to yes and press select.

To register any of the following phones please see you owners manual under either:


•Register handset or


•Register the digital security code.

Sep 23, 2007 | Lands Phones

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Lands Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

5127 Answers

Are you a Philips Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...