Question about HP Computers & Internet

1 Answer

Got beep codes on a pavillion 5150 laptop - HP Computers & Internet

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,082 Answers

Your BIOS manufacturer's site will explain in full the beep codes you're experiencing. The beeps you are explaining is your system failing the POST (power on checks), it emits a series of beeps to tell you the precise nature of the problem. Beep codes are BIOS-specific. The following BIOS sites should help you. You must however first, identify which BIOS you've got.
Award � http://www.phoenix.com/pcuser/BIOS/award_error_codes.htm
Phoenix � http://www.phoenix.com/pcuser/PDF-Files/bios-postcode.pdf
AMI � http://www.ami.com/support/ For all other bioses try http://www.abios.com
Or try these alternative sites:
http://www.tufshop.com/support/beepcodes.htmlhttp://www.hardwarecentral.com/hardwarecentral/tutorials/13/1/http://www.phm.lu/Documentation/Firmwares/BIOS%20Errors.asphttp://www.efacorp.com/support/notes/980216.htm

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp pavillion dv2700 is not starting, 3 beeps, 1 long and 2 short


That is some sort of video failure. "Unable to initialize video (to display the post code)"

Dec 31, 2013 | HP Pavilion dv2000t Notebook

1 Answer

My computer always makes beeps sounds when i boot it up


Hi Daniel,

every computer has certain beep codes that indicate problems during the boot process. These codes are different from each manufacturer. You didn't mention which computer you are having, so I can't send you a solution. The best way is to search i.e. "HP beep codes" or "Dell9150 beep codes".

Let me know if you have any question.
Good luck!

Dec 18, 2012 | HEWLETT-PACKARD Hewlett Packard Techno...

3 Answers

6 beeps no signal and display dell 5150


it is probably a problem with your Ram Memory. however i would like to recomend you to check this link about your computer lights and beep codes http://support.dell.com/support/edocs/systems/dim5150/en/sm/tshoot1.htm

gud luck

Jan 26, 2011 | Dell Dimension 5150 (DIM515MIN) PC Desktop

2 Answers

On power up my HP pavillion beeps three times, the screen will not power up


There is references to beep code in manual.
I think 3 beeps refers to a faulty video card.

Jul 27, 2009 | Computers & Internet

1 Answer

When turning on my HP Pavillion dv6152eu it just beeps.


Take out Your hard drive and put it back in. Try starting it again. If that isn't it then replace the hard drive.

May 24, 2009 | HP Pavilion dv6000z Notebook

2 Answers

HP Pavillion doesn't turn on


That indicates a video problem. You will probably have to replace the motherboard. 

Jan 24, 2009 | HP Pavilion ze2000 Notebook

2 Answers

HP Pavillion Laptop


I have just experienced same p[roblem with my Pavillion laptop. Seems to be a graphics card problem. (Hp have issued extended warranties to cover this problem, which is apparently quite common in the pavillion range?)
I have had to send my machine back to HP to fix it. gah.

Aug 20, 2008 | Computers & Internet

1 Answer

I have a HP Pavillion DV 2000 laptop with me. When i boot my system it gives 1 long beep followed by two short beeps and the system doesnt boot. I am not sure as what to do. Can someone help me here?


This website:
http://www.pchell.com/hardware/beepcodes.shtml

Lists standard beep codes for computers. The one long, followed by two short beeps indicates a display problem according to the site.

I have heard other people say that the same beep codes specify a RAM problem.

Have you recently installed any new RAM or a new graphics card, or made changes to either.

It seems likely to be the graphics card because of the missing info on the screen. Usually when RAM is bad there is something on the screen.

Jul 17, 2008 | HP Pavilion dv2000t 14.1" Notebook Laptop...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...