a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most DVD's have line-level outputs which will NOT drive headphones. You need to run the audio line outputs, which are usually RCA jacks to jacks on an amplifier and then plug the headphomes into that. An inexpensive source for an amplifier is OFTEN at thrift shops. Run the pair of cables into jacks that would likely be labeled TAPE INPUT for example. FInd one that does have a headphone output jack on the front.
What generally happens to connectors, especially exposed to air is they oxydize.
Buy a can of "Contact Cleaner" from a local Radio Shack and spray it (through the thin tube usually provided) into the jack. One quick push, dont flood it. Take the earphone jack and insert and remove it several times, wiping off excess, which sould clear contacts and it should work normally again. If not it would have to be replaced which is no easy matter requiring an experienced Technician or Factory. Sometimes it cannot be replaced without damaging the Mother Board. This however sounds like a common problem the Contact Cleaner will fox
i think the problem is in the jack of your sound blaster. since you have already tried different headphones and the problem still persist, and when you use speakers it works fine. i conclude it is the jack of your sound blaster card.
Hey jack7314, If you've tried several different pairs of headphones and have encountered the same problem with every pair, you could possibly be looking at a defective headphone jack. In some cases when headphones are unable to make a secure connection within the jack, they may only receive an audio signal through one of the two speakers...or no sound at all.
Unfortunately, this means that you may want to seek repairs on your iPod at this time. If you are still covered under the manufacturer's warranty, I would strongly suggest contacting Apple first for more information or further assistance. Many manufacturers may be able to provide faster solutions than third-party service facilities for problems with their products, but remember that it may be necessary to ship your iPod out for repairs.
Additionally, please keep in mind that you may always bring your iPod to your local Best Buy™ store for service if it is beyond the original factory warranty. Geek Squad® agents are able to provide support for most products we sell, and can often provide you with additional suggestions and support.
i had the same problem, the headphone jack on the sansa is loose. I opened it all up, and saw that one of the connections on the headphone jack was loose. you can sauter it and it should work clearly again.