Question about Canon PowerShot A95 Digital Camera

1 Answer

My Canon A95 first went pink then quit. Recharging batteries gets it to start but then it shuts down after a few seconds. "E18 briefly shows on screen"

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 6,826 Answers

Http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a95#ServiceAndSupport

I do not know what e18 means, but the following was found for batteries charged but not lasting very long in the camera:

Issue: Batteries do not last very long in camera.
Solution: If troublshooting fails, the PowerShot A95 requires service.


Unfortunately, the issue you describe seems to indicate that your product requires repair service. Canon has excellent service options and we are eager to provide any assistance you may need. Links to the service options that are available for your product are listed below:
Request a Repair Online You can conveniently pre-arrange repair service with a Canon Factory Service Center through Canon's website. Find a Service Location Search to locate a repair service center and obtain further instructions. If you still have questions about the issue you are experiencing, a Technical Support Representative will be happy to answer any question you may have. You can contact us through the email link or phone numbers listed below.

  • Obtain Support by Email
  • For toll-free technical support, please call 1 (800) 828-4040 during regular business hours (currently Monday-Friday 10:00 a.m. - 10:00 pm. EST, excluding holidays).
  • Toll-free TDD Support Line for the Hearing Impaired is available Monday - Friday (excluding holidays) at 1-866-251-3752
  • Technical Support is available for Customers in Canada at 1-800-OK-CANON
We look forward to helping you rectify the issue you are experiencing and are always available to provide any assistance you may need.

Posted on Aug 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When I power up my A95 I get get a loud stacatto noise


Go to Canon.com and find the service department. Call the 800 #. They should fix your camera for free, and will pay shipping both ways for no cost to you. They will send the necessary information to you by email.
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&keycode=2112&fcategoryid=221&modelid=8776

Sep 25, 2009 | Canon PowerShot A95 Digital Camera

1 Answer

Lens open can not shut down E18


Sometimes it just gets stuck - With the camera on go to the view mode and give it a little jiggle with your thumb and finger. Also - a can of compressed air can loosen up what ever might be stuck in there.

Sep 05, 2009 | Canon PowerShot A95 Digital Camera

1 Answer

E18 error w/sound effects!


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...

Here are some things that you can do to try to correct it. They only seem to work for less than 50% of the lens errors, but if the camera is out of warranty, they're worth a try.

Jul 18, 2009 | Canon PowerShot A95 Digital Camera

1 Answer

Canon A95 Cannot be switched off


Hello there,
The E18 error is related to the LENS not able to retract fully. If it is still under warranty, I would advise you bring it to the nearest service center. This is to avoid further damages. Otherwise, you can try a few things below.
There are a couple of things you can do.
1. Turn it on and then off. Spray canned air around the lens.
If trick 1 will not work out, try this.
2. Make sure the battery is fully charged. Turn on the camera and then give it a couple of firm whacks on the side. Make sure nothing is blocking the lens and wait for it to fully retract.
Let me know how it goes.

Jul 05, 2009 | Canon PowerShot A95 Digital Camera

1 Answer

My canon A95 comes on and goes off after few seconds.


Try to reset your camera using a command in the set up menu. An error message followed by turning itself off, usually means lens jam. Replace the lens.

Nov 12, 2008 | Canon PowerShot A95 Digital Camera

1 Answer

Canon powershot a95


I have a probnlem With Canon A95 camera, there is a e18 eror on dysplay.

Sep 03, 2008 | Canon PowerShot A95 Digital Camera

1 Answer

E18 on Canon Powershot A95


Canon E18 error happens when the lens gets stuck while trying to extend. The camera will beep a few times and the LCD will display a little E18 in the lower-left corner. The lens gets stuck in the extended position, and refuses to move either to focus the lens or to retract when powered off.

take a look at e18error.com website for more info

Jul 30, 2008 | Canon PowerShot A95 Digital Camera

1 Answer

Canon A95 problem


this is a sensor problem canon will repair it without charging you

Jul 02, 2008 | Canon PowerShot A95 Digital Camera

1 Answer

Canon A95 "Change Batteries" problem!


You need to use 2100 mAH or 2300 mAh rechargeable batteries - alkaline batteries will not maintain the high level of power required.

Aug 06, 2017 | Canon PowerShot A95 Digital Camera

1 Answer

Canon A95 operability issue


Defective mechanism, a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes wrong with the camera. You need professional service to fix it.

Sep 30, 2007 | Canon PowerShot A95 Digital Camera

Not finding what you are looking for?
Canon PowerShot A95 Digital Camera Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

169 Answers

old marine
old marine

Level 3 Expert

2005 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...