Question about Printers & Copiers

4 Answers

Refilling of canon ink fine cartridge pg 41

When i refill the canon ink cartridge it is not recognized by the printer

Posted by on

  • 1 more comment 
  • arturogarcia Jun 26, 2008

    hi i have a problem wit my canon printer pixma ip 2200 when i put the cartrige in a message come out and said can not recognize and show both cartriges.the other where in the printer the ink finish so i replace them whit refill

  • Anonymous Jul 08, 2008

    how to install fine cartidge

  • mezaraka Jul 21, 2008

    my canon MP600 printer is coming up with the error message: U150 "the following ink tank cannot be recognized". It is referring to the yellow ink tank.



    All ink tanks are full and are only 4 months old, with very little usage.

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Phew! Finally. This one works for my Canon MP140.
Follow all instructions completely or it won't work....

Power off the printer
Hold the stop/reset button then press and hold power (for 5 secs)
Hold Power and release the stop/reset button
Press the stop/reset button twice
Relase power button
Wait until the power button lights a steady/still green, press the stop/reset button three times with a 3 sec space between each press.
On the 3rd press the inicator should be orange.
Press the power button to set data
To set data remove cartridges then replace.
leave for 20 or 30 secs
Press the power button again to shut down
Then press power button to power up.
The printer will feed one piece of paper through
then set language and counrty.
Then ink should be reset

Posted on Jan 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a HP j4580 printer and I refilled the black cartridge but it still show the cartridge as being empty. How can I reset the cartridge display as being full?

Posted on Oct 30, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Turn off your printer. Hold your (stop/reset) key down. Turn your printer back on wile holding the key down for at least 5 to 10 seconds. You will get screen prompts that will guide you the rest of the way.

Posted on Oct 13, 2008

Reset the cartridge from the printer. there are a few steps to follow

Posted on Jun 24, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: refilling of canon ink fine cartridge pg 41

you must buy a brand new cartridge do not refill your old cartridge and use it again it may cause malfunction of your printer..one thing you have encounter is " the cartridge is not recognized"

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After refiling the cartridge,printer is not recharging, Error-E-2,7 coming & alarm light also blinking


I don't recycle cartridges but one time. Most of the time they won't work if refilled more.

Apr 02, 2014 | Canon PIXMA Printers & Copiers

1 Answer

My canon pixma iP 1800 does not recognise refilled colour cartridge. Can you suggest a fix?


  1. For the not-so-tech friendly, installing ink cartridges in printers can be messy and time-consuming. Although companies such as Canon are constantly trying to make designs more convenient for all users, there are still several tips that can help new printer owners install Canon PG-40 printer cartridges without mess or hassle.
  2. Compatibility
  3. Although many printer cartridges are specific to only a few models, the Canon PG-40 printer cartridge was designed for use with many models of the Canon Pixma and even some of the Canon fax machines. As of September 2010, the Canon PG-40 ink cartridge can be used with the Pixma iP1600 through iP1800 printers, the iP2600 printer, the MP140 through MP190 printers, the MP210 printer, the MP460 and 470 printers, the MX300 and MX310 printers and the JX200 and JX210P fax machines. This versatility allows users to stick with the same type of ink cartridge over the life of several printers and allows small business offices an opportunity to buy one type of cartridge for all office printing requirements.
  4. Refill
  5. Replacing printer cartridges can be expensive and, if it is possible, as it is with the Canon PG-40, refilling is a cheaper and more environmentally friendly option. Refill the PG-40 by gathering a 10 cubic centimeter syringe with a 1.5-inch needle, a pair of latex free gloves, an MIS Yellow Drill Tool, Scotch tape and black ink. Remove the label from the top of the cartridge and use the yellow drill tool to open the vent hole that was covered by the label. Next, load the syringe with 20 CCs of black ink and inject it into the ink hole (where ink leaves the cartridge for the page.) Make sure the needle reaches the bottom of the ink tank and then slowly inject the ink into the cartridge, stopping when the ink begins to well up at the needle insertion point. Now remove the needle and clean the top of the cartridge off to avoid color contamination. Put a small strip of Scotch tape over the vent hole and poke a small hole in the tape with a pin. Now reinsert the cartridge and run up to three cleaning cycles to calibrate the printer.
  6. Resetting the Ink Level
  7. While refilling ink in a PG-40 can save money, it can also cause difficulties when using the automatic ink level sensor. Reset this sensor by removing the cartridge after the printer has been calibrated and placing a thin strip of Scotch tape on the line of gold-colored leads nearest the ink hole on the bottom of the ink cartridge. Replace the cartridge and wait for the computer to display a warning about the ink cartridge being loaded incorrectly. Remove the cartridge and move the tape from the first to the second level of leads and replace the cartridge. When the PC displays a message that the cartridge is not recognized, remove the cartridge and replace without the tape. The ink level will be reset.

Jan 09, 2011 | Printers & Copiers

2 Answers

Ink refill not detected


you must reset the cartridges on mx300
check here the ways

http://inkfilling.net/instructions-on-how-to-refill-canon-pg-37-pg-40-pg-50.html

Jul 25, 2010 | Canon PIXMA MX300 All-in-One Printer

1 Answer

No problem. What is the step by step instructions


go here
http://support.medea.co.uk/download.php?FLIB=1&id=8
this is a
Refill Instructions for -
Canon PG-37/PG-40/PG-50
CL-38/CL-41/CL-51
as bdf file
i hope that helps

Nov 14, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

How do I insert the refill ink cartridge?


according to all information i can find you have got the correct cartridges

nip to canon.com and download the user guide that shows you how yo install your cartriges

Regards AL "alstech"

May 25, 2009 | Canon Pixma iP2600 Photo InkJet Printer

2 Answers

Price of catridge of cannon ip1300


these are the cartridges used in 1300

CL-41 FINE Colour Cartridge
PG-40 FINE Black Cartridge
click here for cl 41 prices
http://www.google.com/products?q=cl-41

Click here for pg-40 prices
http://www.google.com/products?q=pg-40



Let me know if you need anything else.
Thanks,
Ekse

Mar 05, 2009 | Canon PIXMA iP1300 Printer

2 Answers

I NEED TO KNOW HOW TO REFILL INK FOR A CANON MX310 #41 COLOR.i DON,T KNOW IF YOU PRY THE TOP OFF OR IF THERE ARE SOME REFILL HOLES SOMEWHERE.SHIRL85@EMBARQMAIL.COM


Your printer uses the following cartridges:

canon-pg-30
Black Pigmented
canon-cl-31
Color
canon-pg-40
Black Pigmented
canon-pg-50
Black Pigmented canon-cl-41
Color
canon-cl-51
Color


ou find the refill instructions for your cartridges in the book at the link below:

Download Inkjet Refill Instructions

You can also buy refill kit here: inkjet refill products.


You also need to reset the cartridge after refill, see: Reset Ink levels for canon mx310 - FixYa

Mar 02, 2009 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Refilling of canon ink fine cartridge pg 41


you must buy a brand new cartridge do not refill your old cartridge and use it again it may cause malfunction of your printer..one thing you have encounter is " the cartridge is not recognized"

Feb 15, 2009 | HP Printers & Copiers

1 Answer

Error Number : 1485 The following ink cartridge cannot be recogni


Nope! Canon played a little nasty on re-fillers and made these cartridge virtually un-fillable. Not that they can't be refilled, they can. They just won't be recognized in your machine.
They have done a couple of strange things with the software and the cartridge.

1. Software writes to the cartridge to actually marry it to the machine. This encodes id numbers on the cartridge so that another machine cannot use the cartridge.
2. They have placed a "fuse" of some type in the cartridge which is actually "blown" when the "out of ink" message is displayed. This renders the cartridge un-usuable for another cycle.

I like the Canon product. Just not these particular ones. The ones that take cartridges 30/31/40/41/50/51. I have seen too many of them come into my shop for repairs after barely 2 years of use. They are un-repairable regardless of their issues.

I suggest you look at a different Canon product, one that takes the individual ink tank cartridge PG-5 and CL-8 series. These are much better machines and the printer itself will last longer.
Just be aware that you will have an added cost in the print head which is a consumable that will need to be replaced every 3 years or so!

Nov 15, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

4,517 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

old marine
old marine

Level 3 Expert

1476 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...