Question about Twinhead Durabook N15RI-2 Notebook PC

2 Answers

I have to disconnect the power cord from my motum and reconnect to get on the internet.

Posted by on

  • marion cotter Aug 08, 2010

    IN ORDER TO GET ON THE INTERNET I HAVE TO UNPLUG MY MOTOM AND REPLUG IT. DON'T UNDERSTAND WHY

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,281 Answers

Reset your modem to defaults. For that press RESET button it is in the back side of router press it for 10 seconds then all settings defaults. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on WAN settings and set as your internet service provider settings. Enable DHCP if you want ip from router. If you use wifi then turn on wireless.If you want to secure wifi then click on wireless ->wireless security and enable WEP security enter password . Then save settings and restart router Let me know if you need further assistance. Thanks for using FixYa.

Posted on Aug 08, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 567 Answers

Hi there, please explain what happen when you disconnect and reconnect the power cord?

Posted on Aug 04, 2010

  • 1 more comment 
  • marion cotter Aug 04, 2010

    before i disconnect the power cord i am not connected to the internet. when i disconnect it and reconnect it and wait for all the lights to come back on the motum then it willconnect to the internet

  • Hilton Bristol Aug 04, 2010

    Okay thanks for the reply, i need to know if you are getting on the internet now or not ?

  • marion cotter Aug 08, 2010

    NO I AM STILL HAVING PROBLEMS

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just reset my dell computer back to factory setting. How do I now reset up for internet connection. My provider is verizon and I am using internet explorer


You want to reset your internet connection???
If yes then follow the given steps....

Step 1

Turn the modem so that the back of it is facing you. Locate the power supply cord connected to the back of the device.
Step 2

Gently unplug the power supply cord and leave it unplugged for about 10 seconds. If you also have a router connected to the modem, disconnect the power cord of the router as well.
Step 3

After about 10 seconds reconnect the DSL modem power cord. Wait for the status lights on the front of the unit to come on. They may blink at first before turning solid green, or they may first illuminate as orange, then turn green, depending on the modem model. The "Internet" and "Incoming" lights may continue to flicker, this is normal operation for modems.
Step 4

After the modem is reset, reconnect the router power supply if you have a router. Wait a few minutes before resuming normal Internet use.

If you need any kind of technical assistance you can contact support cell

Jan 19, 2013 | Computers & Internet

1 Answer

HOW DO U CONNECT A NOTEBOOK TO COMPUTER WIRE INTERNT?


There is an ethernet port on the notebook. All you need is an ethernet cable that goes from your ISP modem to your notebook. On some ISP's (internet Service Provider) it's possible that it does not give you internet access. What you may have to do is disconnect the power cord from the modem wait 5 to 10 seconds and then reconnect the power cord.

Dec 08, 2010 | Computers & Internet

1 Answer

I changed the ink of my printer and now it wont print anything just keeps flashing a red light. Ive tried turning the computer on and off but nothing is fixing it. Please help


Please perform the steps below and check..

1. Make sure the product is on, and then disconnect the power cord from the product.
2. Disconnect the USB cable from the product, and then disconnect it from the computer.
3. Reconnect the USB cable to the computer, and then reconnect it securely to the product.
4. Disconnect the power cord from the wall outlet, and then reconnect it to the wall outlet.
5. Reconnect the power cord to the product.
6. Press the Power button to turn on the product.

If the issue still persists please get back to me with the Printer name and model number

May 18, 2010 | Office Equipment & Supplies

1 Answer

Black mark on copy that looks like a burn


Hi,

This is due to loose connection or static interferance. To resolve this issue, check the product connections and reset the product.

Steps:-
  • Make sure the product is powered on, and then disconnect the power cord from the product.
  • Disconnect the USB cable from the product, and then disconnect it from the computer.
  • Reconnect the USB cable to the computer, and then reconnect it securely to the product.
  • Disconnect the power cord from the wall outlet, and then reconnect it to the wall outlet.
  • Reconnect the power cord to the product.
  • Press the Power button to turn on the product.
It will resolve the issue, Else visit this link:-
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00899181&cc=uk&lc=en&dlc=en&product=3204785

Have a nice day...don't forget to rate the solution

Feb 20, 2010 | HP Photosmart C7280 Printer

1 Answer

Printer is locked up. screen displays Error E000


Hi,

Disconnect and reconnect power cord to reset the device.
Steps:-
  1. At the device or at the electrical outlet, disconnect the power cord or adapter.
  2. Wait approximately ten seconds and then reconnect the power cord.
  3. Wait until the device has completed its cycling process before submitting another job request.

Feb 16, 2010 | Canon imageCLASS D680 Laser Printer

1 Answer

We have no phone service at our home, since disconnecting and then reconnecting comcast box. We have a new computer and was instructed to disconnect modem and power cord for ten seconds to allow...


there should be a standard telephone cord that went from one of your telephone jacks to the comcast modem. that cord should be plugged in to the phone jack marked 1 on the back of the modem.

Sep 23, 2009 | Lands Phones

2 Answers

ERROR OXC18A0005 HP PHOTOSMART 8250


  1. Make sure that the product is turned on and then disconnect the USB cable from the back of the product.
  2. Open the product cover and remove the cartridges.
  3. Close the cover and wait for a message to insert the cartridges to appear on the control panel display.
  4. Disconnect the power cord from the back of the product.
  5. Disconnect the power cord from the wall outlet and wait for one minute.
Reinstalling cartridges
    1. Reconnect the power cord to the wall, reconnect the other end of the power cord to the product, and then turn on the product if it is not already on.
    2. Open the product cover and reinstall the cartridges.
    3. Close the cover and print a calibration page, if prompted.
    4. Print a self test report to make sure that the product can print.
    5. Reconnect the USB cable between the product and the computer.
    6. Try to print a document from an application on the computer.
    http://www.fixya.com/support/t2411353-hp_c6280_says_jammed_now_ink_system

Aug 08, 2009 | HP Photosmart 8250 InkJet Printer

1 Answer

Internet and modem light won't light up


Try disconnecting the power from the cable modem - wait about 10 seconds then reconnect the power. It may take a few minutes to reconnect depending on your provider but sometimes cable modems get "frozen" and need to be power cycled.

If you are using a motorola surfboard modem make sure that you do not press the button on the top of the modem whn you are reconnecting the power cord because it is designed to turn off the internet connection for security purposes.

Dec 28, 2008 | Computers & Internet

Not finding what you are looking for?
Twinhead Durabook N15RI-2 Notebook PC Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Twinhead Computers & Internet Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Lee Durbin
Lee Durbin

Level 3 Expert

408 Answers

Carl Rick

Level 2 Expert

74 Answers

Are you a Twinhead Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...