Question about Sansui HDLCD-2600 26 in. LCD Television

2 Answers

Repair of Power Supply Part


I had purchased Sansui LCD 14 month ago and now the warranty has expired. My complaint is LCD has not worked due to problem with power supply part as per engineers opinion and they said that this part is not repaired for more now and for new part is cost INR Rs. 9000/- so pl let me know what can i do as this cost is too high.

Posted by on

  • browne60 Jun 04, 2008

    I have a Sansui SAN 2601 LCD TV which has not worked since a power "spike" - looking at the circuit board / power supply it seems there's a power ic with the top blown off it and a blue capacitor (?) with the marking 151 kV (can't read it all - the capacitor is partially melted) - can I order these 2 components?



2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Put your ear by the switch on the tv switch it on and off a couple of times if you hear a crackle its probable the switch its self, they always seem to go on these LCD tv i have one my self i had the same problem but i knew when i heard the crackling i new it was the switch shorting the circuit so i just took the back off the tv makng sure i didnt lose any screws located the switch cut the switch out and just wired it straight through it didnt cost nothing only electrical tap. anyway i cut the switch linked the brown wire to the blue wire twice then i places electrical tap around the wires now you will see it working. all you have to do now is just turn it off at the wall or keep on stand by.

Posted on Mar 19, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 286 Answers

Switching power supplies are very tough to repair. Most of them are proprietary and use unusual parts.

Your best bet is to purchase the correct supply and install it yourself.

Posted on May 07, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

5 Answers

Yellow light / No green

The power supply failed on your LCD. The yellow standby light indicates that there is a problem with the voltages being low due to defective capacitors.
Let me know if you need further assistance.

Aug 31, 2008 | Vizio L32 32 in. LCD HDTV

2 Answers

TV was on then suddenly shut will not light up to show it has power and will not work at all. Just bought this less than a month old.

check the LCD bulb it is located at the top and bottom of the LCD monitor maybe it is defective or maybe the power supply of the bulb is also defective.Replace the bulb or the power supply you can use the power supply of a cathode light that is usually use in motor cycles

Jul 22, 2011 | Coby TFDVD2495 LCD TVDVD Combo

1 Answer

Dear Sir, I was purchased SONY BRAVIA LCD TV Model KLV32S 550A from Singapore on 10, September 2009. Using at Chennai India. On 15-09-10 we had problem on this LCD TV. We registered complaint on...

Send all this information to and see what they say regarding a warranty repair.
Your receipt for the product is proof of purchase and is seen as that.
I am however, not familiar with warranty repairs in your country. Speak to Sony.jpn

Jan 13, 2011 | Sony Televison & Video

2 Answers

I have an 8-month old Samsung 32" LCD HD TV and 2 days ago it started with the following problems: - No video, Power light is blinking. - TV is making a clicking noise. - TV is turning itself off...

This may be due to bad capacitors in the power supply circuit, Have the power supply checked for leaky or puffed up tops on capacitors in the PS.

Dec 23, 2010 | Samsung LN32B530 32 in. LCD HDTV

1 Answer

Had power surge tv will not work fuse blown or power supply tv is only 3 months old

This TV should still be under warranty. Most new TV's have electronics warranty of 1 year.

Mar 13, 2010 | Sansui HDLCD3210 32 in. LCD TV

2 Answers

Sony kdl-46xbr4 Black Horizontal Bands When I First Turn on TV

I had the exact same problem with the Sony KDL46XBR4. The problem started 11 months after I purchased the TV (Dec 2007). Luckily I placed the call to Sony just before the 1 year warranty expired and they replaced the entire front panel which is basically the whole TV except for the stand and the plastic frame. Last month the same issue started happening again (5 months since the repair). I called Sony and they say they have a 90 day warranty on the replacement part so I would need to pay out of my own pocket to first have the problem diagnosed (it's the EXACT same problem!) and then pay to have the repair done since the warranty has expired. I asked how much the front panel costs and it's $1,400! I paid $2,100 for the TV when I purchased it. Interestingly, at the time that part was back-ordered.....hmmmm, I wonder why??? Perhaps a recall is warranted here (no pun intended). Needless to say, I have sworn off Sony products due to their lack of support for this issue.

Jun 01, 2009 | Sony KDL-46XBR4 46 in. LCD Television

1 Answer

14 month old Prima 36 inch lcd tv takes 2+ hours before on.

If you purchased the warrenty extra above the cost of the tv Sears will allow you to purchase another extended warrenty. Contact them and let them know your extended warrenty ran out and you would like to buy another. I would leave out the part about the tv being broken.

Dec 16, 2008 | Televison & Video

1 Answer

Protron TV 32

If your TV is not turning ON, the power supply is defective. It's a bit hard to find service parts for these TVs, the only way to fix the power supply is to replace the defective parts.
If you need more info let me know or you can write to

Jun 17, 2008 | Protron PLTV-32 Television

Not finding what you are looking for?
Sansui HDLCD-2600 26 in. LCD Television Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69882 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sansui Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides