Question about Televison & Video

1 Answer

Tv works fine if trying to play a dvd but can't pick up tv channels at all now

Hi, tv is 2 yrs old and out of warranty. had no problems with it and then one day it wouldn't receive any picture from the external aerial. tried rabbit ears, same result. have tried another tv through the same external aerial socket and it works fine. tv plays movies same as always. tv is not digital. is it possible for to fix this problem myself? if so, how?
thankyou

Posted by on

  • Anonymous Mar 15, 2014

    socket not working aerial is new and is the first time used, have checked it with other tv socket and the tv works, how do I check to see if socket is working?

×

1 Answer

Your tv has a problem in its tuner or intermidiate frequency section.it is better to bring it a service center to repair it.but if your familiar with tv parts and its function perhaps you can resolder the tuner pins and adjust the IF transformer for video which is usually mark VCO in the circuit board.

Posted on Apr 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No color when playing dvd


try to connect cables again. make sure you push them strongly to maka sure it works. if that won't work your dvd or tv is damaged

Apr 06, 2010 | RCA Televison & Video

1 Answer

How to connect an dvd to old tv


they make a small box called an RF modulator. It takes the audio/video signals and turns them into a signal the coax can read. You can pick one up at electronic stores. There usually about 15-25 $.

Feb 02, 2009 | Televison & Video

1 Answer

Cannot get dvd to play through tv


Check Your Remote For A Tv/Video Button.

Jan 22, 2009 | Televison & Video

1 Answer

Prima HDTV has a black screen on TV, but works fine while Playing DVD


try turning the channel up or down with the tv remote to input 1 or 2 depending on which one is being used for the dvd player. tv should use input 1. dvd should be on input 2.
when turning the channel set it to show the dvd screen, then go up 1. if it doesn't show, return and go down 1.

Oct 22, 2008 | Prima C2012 TV

1 Answer

Cannot get dvd to play on tv, no picture, try different channels, etc.,


on you tv must be a button "video/tv",you have to push this many times to find front, back or video1 or video2 (depent were you plug the dvd)and there is were supost to work. no on channel 3 or 4

Oct 21, 2008 | Disney DTD1363-CAR 13" TV/DVD

2 Answers

RCA f20580wn 20" TV about 20 years old


Hopefully you have the problem solved.

If not, the RCA plugs, listed as input 1 and 2 are shown on channel 91 and 92.

I recommend connecting the DVD to either input. Turn on the DVD. Then run the auto programming function of the TV. It will find and program the channel for the DVD. Then use the channel up or down on the remote you are currently using and you should find a working DVD.

Hope this helps.

Rcs97

Apr 07, 2008 | Televison & Video

1 Answer

Grundig TV - Tuning DVD & VCR


Hi there!
If the DVD recorder has an RF out then you should be able to tune it on UHF bandwidth. The cable should run from the RF Out on the recorder to RF on the TV. Switch the recorder on, put in a DVD and press play before tuning. Some DVD's require a disc before a Menu appears. Good Luck, Regards, JUS004

Mar 23, 2008 | Grundig GF70-600 TV

6 Answers

Can't get TV onto the AUX channel


You can purchase an RCA universal remote that will let you access the A-V inputs. These only cost about $10.00 or so. Stargazer

Sep 09, 2007 | RCA F25254GY 25" TV

3 Answers

Cannot get DVD to Play on TV


Try the old RCA/GE channels of 90/91 or 92 to get to the inputs. Or try entering channel 00. Let me know if that works.

Feb 21, 2007 | RCA F32649 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71126 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

66563 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...