Question about Brother HL 1435 Laser Printer

1 Answer

I have a couple Brother Printers HL-1435 that are in alarm status and will not print. The Drum light will flash, and then the Drum, Ready, Alarm and Data lights all flash at the same time. How can I clear the error message so that I can get the printers to print once again. Thank You

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 268 Answers

Hello,

This could mean one two things.

* The toner cartridge is nearly empty.
* You have a paper jam.

To replace toner cartridge:
Click this link to go to the Brother site where it will show proceddure with illustrations how to change the toner cartridge.

http://welcome.solutions.brother.com/BSC/public/us/us/en/faq/faq/000000/000000/000065/faq000065_011.html?reg=us&c=us&lang=en&prod=hl1435_us&Cat=7


To clear a paper jam:
Go to this link for procedure. It also has illustrations to assist you.

http://welcome.solutions.brother.com/BSC/public/us/us/en/faq/faq/000000/000000/000026/faq000026_005.html?reg=us&c=us&lang=en&prod=hl1435_us&Cat=113

I hope this helps.


Posted on Aug 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brother HL-1435 printer not printing. Alarm and data lights stay on. I tried replacing the toner, replacing the drum, factory resetting printer (both are genuine Brother products), uninstalling and...


try reseting drum unit

Open the front cover. Locate the black button under the LED lights on the left side. Press and hold in the button until all the lights are lit. Release the button. The counter is reset!
its toner soup

Nov 18, 2013 | Brother HL 1435 Laser Printer

1 Answer

Red Alarm light (and all others) flashes, does not print. Closed properly. Seems to be a small amount of toner left in cartridge.


Go into Test Print Mode
The printer incorporates various test print modes.
Select the test mode you want to use following the steps below;
(1) Turn off the power switch of the printer and check that the front cover is closed.
(2) Turn on the power switch while holding down the control panel button. Press the button
until the Drum LED comes on.
The Drum LED illuminates to indicate that the printer enters into the test print mode.
(3) If you want to execute the test print, release and then press the button again when the
Drum LED comes on.
or
Push "alarm" button : The printer is restored to the factory setting and permanent fonts and macros are cleared.
The printer returns to the ready status after
printing.
If it does not reset, replace the main PCB.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Thanks, Joe

Feb 22, 2011 | Brother HL 1040 Laser Printer

1 Answer

My drum light and the ready alarm and data lights are all flashing and I just put a new drum in and the lights are still flashing and it is not printing.


Follow the link below to see what the light flashing mean.

http://welcome.solutions.brother.com/BSC/public/us/ca/en/faq/faq/000000/000100/000070/faq000170_012.html?reg=us&c=ca&lang=en&prod=hl1440_all

Apr 05, 2010 | Brother HL 1440 Laser Printer

1 Answer

Brother HL-1440 LASER PRINTER requires ''Service Call A''.


currently, the error you have is not a service errorl, ready and alarm blink means that you have either a paper jam, no paper, or a paper misfeed.

do you get this error only when you try to print?
according to the service manual the lights can not alternate in blinking.

May 30, 2009 | Brother HL 1440 Laser Printer

1 Answer

All lights are flashing not printing


Might have a paper jam in area of toner and drum cartridge that may need to be removed. Typically this will solve the issue.

Feb 11, 2009 | Brother HL 1430 Laser Printer

1 Answer

Brother hl-1430 :drum , ready and alarm leds flashing


This just means that your drum life has nearly reached his end.
Note that when you replace the drum you need to perform the drum counter reset procedure, otherwise the leds will keep on burning after replacing the drum unit.

Apr 03, 2008 | Brother HL 5170DN Laser Printer

1 Answer

Laser Printer HL-1440


Hi , The error message your getting refers to the following for the Ready & Alarm Buttons Flashing.

1. Paper Jam
2. Misfeed
3. No Paper

I hope this helps!!

Dec 05, 2007 | Brother HL 1440 Laser Printer

Not finding what you are looking for?
Brother HL 1435 Laser Printer Logo

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

James Cagle
James Cagle

Level 2 Expert

453 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...