Question about GE RM24930 Remote Control

1 Answer

My GE Universal remote no longer works. The battery is fine but the signal is no longer working on my TV. I would like to try to reset the remote to my TV.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,932 Answers

Hi,

Please try to programme your GE remote to your TV

Manual code entry

1.Turn on your television or other electronic component that you want to program the remote control for.

2.Hold down the "Code Search" or "Setup" button until the LED indicator light turns on.

3.Hit the button for the component that you are programming (TV,DVD VCR, etc.). The LED light should flicker and stay on.

4.Enter the 3-digit or 4-digit code that corresponds to the TV or device that you're operating.The LED light should go off if the code is valid, but will flash if it is not. Try other codes you have.

5.Try turning the television or other programmed component off to ensure that the remote works properly, once the light has gone off.


Auto configuration


1.Turn on your television or other electronic component that you want to program the remote control for.

2.Hold down the "Code Search" or "Setup" button until the LED indicator light turns on.

3.Hit the button for the component that you are programming (TV, DVD, VCR, etc.). The LED light should flicker and stay on.

4. Press and release the "Power" until the television or other component turns off while waiting at least 2 seconds between each press.

5.Press "Enter" or "Save" once the remote has effectively turned the power off. The LED light will shut off and the remote will now operate the device.


You can get your codes from below website

http://www.jascoproducts.com/support/universal-remote-codes.asp

Thanx

Posted on Aug 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just replaced the power supply Backlight inverter to Vizio Model E470VL TV. It works fine now but I can't get the remote control or a Universal remote to work. Do I need to purchase a special remote?


If the remotes have good batteries and are both working, and the set still does not respond, you might try to reset the sets electronics. If that does not do the trick then the board responsible for responding to the remote signals generated has an issue.

Feb 23, 2017 | Vizio Televison & Video

1 Answer

Correct code for universal remote will not turn off tv. On the 50" digital led model ELEFT502. Original remote always had a weak signal worked only when pointed a foot away from infared reciever. Then quit...


No universal remote control will work with any TVs as well as the original ones. If the original remote control do not get range, there are two reasons for it; and can be repaired to.
1. Battery weak [Replace with new batteries]
2. The infra-red light emitting diode at the front of the remote control is weak.[Can be replaced with a new one. It can be bought from most of the electronic spare part selling shops]
Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

Feb 06, 2015 | GE Televison & Video

1 Answer

Remote will not work


It needs to be Re-Paired to the TV.

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:
  1. TV off
  2. Bring remote within 3 feet of TV
  3. Push Pairing button (Paper Clip or other pointed object in button hole)
  4. Turn on TV
  5. Should be paired. Try remote channel or other buttons.
  6. If not, try 2 more times.
  7. If still not working, push RESET button first and repeat Pairing.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

Please rate if Helpful.

Good Luck !!

PAIRING
and RESET buttons:



remote-will-not-work-tiee3lbaghb4kteyvqjgelx1-2-0.jpg
Within 3 feet of TV


remote-will-not-work-tiee3lbaghb4kteyvqjgelx1-2-2.jpg
  1. TV off
remote-will-not-work-tiee3lbaghb4kteyvqjgelx1-2-5.jpg

Mar 05, 2014 | Samsung TV Remote Control

1 Answer

Where can I purchase a remote for my GE Tv model 35GT720 the remote I have no longer work


You can purchase a universal remote that works with all sets at any Walmart, Target, Sears, Best Buy, Big Lots, Radio Shak ect. They come with instructions on how to program the remote to work with your model television set. Universal remotes also control DVD players, VCR's, Cable TV ect.

Jul 06, 2011 | GE 35GT720 35" TV

2 Answers

My sansung remote quite working, replacement universal remote was programed to the tv but the tv will still not respond. What's next?


You likely don't need a new remote. Certainly not a Universal.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

Try this:

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:
  1. TV off
  2. Bring remote within 3 feet of TV
  3. Push Pairing button (Paper Clip or other pointed object in button hole)
  4. Turn on TV
  5. Should be paired. Try remote channel or other buttons.
  6. If not, try 2 more times.
  7. If still not working, push RESET button first and repeat Pairing.



Please rate if Helpful.

Good Luck !!



sansung-remote-quite-working-tiee3lbaghb4kteyvqjgelx1-2-0.jpg

Jun 18, 2011 | Samsung TV Remote Control

1 Answer

Universal Remote Lost Codes


need codes for remote to work a 27" samsung tv

Dec 06, 2008 | RCA Universal Remote Control

15 Answers

Sanyo tv codes


The codes listed by Sanyo for my TV won't work in my star Choice remote.
I tried 017 021 039 056 057 058 and 140 as listed by Sanyo.
Any ideas?

Dec 18, 2007 | GE JASRM24912 Remote Control

Not finding what you are looking for?
GE RM24930 Remote Control Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74211 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Are you a GE Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...