Question about Maxent MX-50X1 50 in. Plasma Television

1 Answer

50" Maxent plasma..sound but no picture - Maxent MX-50X1 50 in. Plasma Television

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,099 Answers

Hello,
Problem is in either power supply or the Y-Sustain board.

The Y-Sustain is a relatively large board out of which go connections to the side of the display; it's therefore closer to either the left or the right side of the display, has at least one rather large heat sink on it and fat power cables connecting it to the main power supply.

Often there are fuses on that board - one or more. Check those.

if they are blown you can try to replace them, but expect them to blow again - usually the whole board needs to be replaced.

often that *needs* to be done in a service center as there are some adjustments to be made after replacement; don't know about this particular TV model.


Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv is not working


NO PICTURE BLACK IMAGEN,ONLY SOUND.MAXENT 50 PLASMA

Feb 21, 2013 | Maxent MX-50X3 50 in. HD-Ready Plasma...

1 Answer

Maxent 60 in lcd tv flickers


I had the same problem with my 50 inch Maxent, found a solution on the internet that seemed too good to be true, but I replaced a part that cost me $1.38 at Radio Shack and my tv is as good as new. Go to this link for details and even includes pictures. All you need is a scredriver (to remove back cover) and a soldering iron - repair is actually very easy. Good Luck!

http://www.avsforum.com/t/595430/maxent-50-plasma-mx-50x3-official-thread-do-not-post-prices/2130

Oct 18, 2012 | Maxent MX42X3 42 in. HD-Ready Plasma...

1 Answer

Maxent repair center in saratoga ny area


Please try to replace the control board..it will end the issue..

Mar 06, 2012 | Maxent MX-50X3 50 in. HD-Ready Plasma...

1 Answer

I have a 42" Maxent plasma TV about 7 years old.


Is it 7 years old? Marvelous. Exciting. the lifetime of Maxent televisions are 6 moths the most!!!
You're lucky.

May 12, 2017 | Maxent MX-42VM10 42 in. HD-Ready Plasma...

1 Answer

I have picture but no sound on my maxent plasma tv?


Check your mute control off/on status. If OK check speaker. If speaker is Ok, it is a sound IC problem. Contact service center.

Apr 20, 2010 | Maxent MX-50X3 50 in. HD-Ready Plasma...

1 Answer

I have a 50 inch plasma and the picture went black but I have sou


You should check the a/v cables, one of the yellow cables is probably broken if not you should get a new cable

Dec 07, 2009 | Maxent MX-50X1 50 in. Plasma Television

2 Answers

50" Maxent Plasma TV now takes almost 5 min to "warm up". Starts black then flickers to a decent picture


you need to have a licenced repair tech come look at it sounds like the inverter is going out its kinda likea ballast for florecent lights

Oct 28, 2009 | Maxent MX-26X3 Television

1 Answer

Picture problem with Maxent Plasma MX-42HPM20


Very common problem on these sets caused by bad surface mount caps. Check on ebay for a repair kit it's the only place I know where one exists.

Feb 23, 2009 | Maxent MX-42HPM20 42 in. Plasma HDTV

1 Answer

Need assistance on how to repair a plasma tv with no picture but sound


This site is BOGUS.
Invites you to post problems and "Ask an Expert" then wants you to pay a fee or you are SOL. Won't recommend and Won't be back

Jun 29, 2008 | Maxent MX-42VM 42 in. Plasma HDTV

Not finding what you are looking for?
Maxent MX-50X1 50 in. Plasma Television Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maxent Televison & Video Experts

Michael Harrier

Level 2 Expert

125 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74198 Answers

Are you a Maxent Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...