Question about General Electric JBP65MMBS Range

2 Answers

The hot cooktop light stays lit long after the burners are off.

Posted by on

  • MANNYAJA Aug 03, 2010

    The burners were off for over 12 hours and the hot cooktop light is still on. Please advise.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,923 Answers

It is normal for an electronic tap touch-controlled glass cooktop to have its hot indicator lights come on, though the burners are off, when power is turned on from the breaker.

This ensures the cooktop has properly cooled before turning off the hot warning lights. Indicator lights will remain on up to 30 to 40 minutes.

Thank you!

Posted on Aug 03, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,761 Answers

The light is a warning that the burner may still be hot enough to cause a burn if it's touched. It's common for a burner to take 15 minutes or more to cool down, and the light will stay on until the temperature is safe. Hope this helps.

Bill B.

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hot surface light stays on on GE Profile Cooktop model JP989 and On does not light for left burners. This is only happening on left burners. Left front burner goes to high with any setting on the switch...


You could have a shorted burner, if it is not then you may have gotten a bad part.

always unplug electricity before attempting to repair on any electrical appliance

Aug 17, 2017 | GE 30 in. Profile JP989 Electric Cooktop

1 Answer

Surface unit light stays lit. even when burners are turned off


Hi,
Here is a tip that I wrote about the problem of the cooktop light staying on.

Oven Hot Surface Indicator Light stays on heatman101

Aug 04, 2011 | Kenmore Kitchen Ranges

1 Answer

The burners light, but it takes an inordinate time for them to stay lit. One of the burners will not stay lit when the knob is released, regardless of how long you depress the knob.


Need a new fsd ( looks like a small brass pencil) for the burner that won't light. The alignment of the ignition electrodes needs looking at and there over all condition I. E broken , worn , misaligned ect

Jul 13, 2011 | Bosch PGL985UC 36 in. Gas Cooktop

1 Answer

I have bosch pgl985uc burner problem. The center burner will not stay lit.


I have the same problem especially with the center burner, but now am having increasing difficulty with two other burners. Those will eventually stay lit if I depress the knob for 20 - 30 seconds. The center burner will not stay lit, even when keeping the knob depressed for 2 - 3 minutes!

Mar 19, 2011 | Bosch PGL985UC 36 in. Gas Cooktop

2 Answers

Gas stove burner will not turn on


Hi,
Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.

Cooktop Range Stove spark ignition does not work
http://www.fixya.com/support/r5649407-cooktop_range_stove_spark_ignition_not

heatman101

Apr 29, 2010 | Gaggenau 23 in. KG 260 Gas Cooktop

1 Answer

Burner not lighting


Yes, you need a technician. It could be spark module or spark igniters on each burner.

I’m happy to help further over the phone at https://www.6ya.com/expert/vitaliy_f406165329c75ede

Dec 15, 2008 | Cooktops

2 Answers

Burners will not light or stay lit


lhs burner - problem is probably thermo-couple. this is a safety device which prevents gas escape if flame blows out. rhs burner - you do not say if it can be lit by a match. if so then it is a problem with the electrode or the wire to it chaffed thro. if can't be lit by a match, then a problem with the gas valve which is unusual not a diy fix unless you are experienced

Apr 11, 2007 | Miele 30 in. KM320G Gas Cooktop

2 Answers

Cooktop light stays on when cool


the "hot top" indicator lamp is switched by a contact on the plate cut-out. sometimes this cut-out is available as a separate part but often must fit complete plate. by plate i mean the bit that gets hot!

Mar 28, 2007 | Kenmore 30 in. 42701 / 42702 / 42709...

Not finding what you are looking for?
General Electric JBP65MMBS Range Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top General Kitchen Ranges Experts

D. E. Hev

Level 3 Expert

1181 Answers

Vernon Taylor

Level 3 Expert

4604 Answers

Melissa Martin
Melissa Martin

Level 3 Expert

753 Answers

Are you a General Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...