- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is a heater control problem in the fuser. The fuser is the assembly of heated rollers in the rear of the device. The most likely cause is either a blown heater element, or perhaps a faulty temperature sensor. Usually we fit an exchange fuser assemblt to fix this.
The Tray Table in Tray 2 took more than 40 seconds to rise or didnt rise at all. First, check the tray 2 lift gears. Second check the tray 2 lift arm. Third check the tray 2 table height motor (M403). Lastly, check the tray 2 Height Sensor (S413)
I have listed these in the order of their likely to fail. Most of the times, its the lift gears
If both Lights are solid, it means that the top cover is still open and the toner is low. Please make sure the top cover is closed all the way. If the toner light is blinking and the errror light is solid, it means there is a toner cartridge error. Please try a new cartridge. If that solves the issue, then you should return the damaged one.
This error means the incorrect toner is installed. Most toners for similar printers will fit, but they have a chip on them to make it so it only works with certain models. Please make sure this is the right toner for the model printer. If it is and you still receive the error, you should try to return it to the place you purchased it from, as it is defective.