Question about Kitchen Ranges

3 Answers

The range starter keeps clicking incessantly - Kitchen Ranges

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 758 Answers

There might be a problem with the switch..Have you changed the switch?
Please rate accordingly
Thank you
Computerrep

Posted on Apr 25, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,102 Answers

This could be down to the switch need replacing have you tried switching off at mains and see if this resets the starter it usually gets gunked up with grease try pressing it really quick sometimes this gets it working.
If not then the switch assembly could need replacing these are not expensive but can be difficult to do as it requires getting to it from inside

Posted on Apr 25, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 549 Answers

There may be a problem with the switch if it keeps clicking.
First the pilot has to open and then electronic ignition.
It should only click if the flame is not on.
I need more info about the make and model of it.
And I am assuming that you have a gas range and not an electric one.

Posted on Apr 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Piezoelectric starter keepsclicking on the oven


Hi,
Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range Repair Burners Keep on Clicking
heatman101

May 05, 2011 | Five Star TTN280 Gas Kitchen Range

1 Answer

My starters keep clicking


Hi,
Here is a tip that I wrote that will help you with that...

Gas Range Repair Burners Keep on Clicking
http://www.fixya.com/support/r4033033-gas_range_repair_burners_keep_clicking

heatman101

Jul 18, 2010 | KitchenAid KGST307 Gas Kitchen Range

1 Answer

Clicking of electric starter on gas range top


Hi,
Here is a tip that I wrote that will help you with that...

Gas Range Repair Burners Keep on Clicking
http://www.fixya.com/support/r4033033-gas_range_repair_burners_keep_clicking

heatman101

Jun 04, 2010 | Jenn-Air JDR8895AAS Dual Fuel (Electric...

1 Answer

Wolf Range r366 - How do I replace the igniter


I have a Wolf Gas Range and initially my igniter incessantly sparked. I noticed that the igniter is cracked. Do I need to replace it and if so how do I replace it? The electrical wire to the igniter became disconnected; should sticking it back into the igniter cause it to work?

Jun 29, 2009 | Wolf Range CHR-0-29-FT34 Gas Kitchen Range

1 Answer

Error Message F1


no your control is out and needs to be replaced. the alarm is in the control itself. most ge ovens cannot be used, will not go into the bake or broil mode

May 15, 2009 | GE Kitchen Ranges

1 Answer

Dacor duel fuel range


F1 is a Relay circuit failure . you have a bad relay PCB or wire connection.

92028 RELAY PCB, 105 C

Aug 19, 2008 | Dacor Preference RSD30 Gas Kitchen Range

2 Answers

Kenmore electric range 911.9369181


F8 Failure of Electronic Range Control (ERC) Replace Electronic Range Control/Clock (ERC)

Dec 01, 2007 | Kenmore 91112 / 91114 / 91117 Electric...

1 Answer

Viking Range


The clicking is the electrode arcing. when the burner lights, a sensor tells the electrode to stop sparking after is heats up a little, that's why is clicks a little after the burner lights, but then stops. If the spark keeps going, the sensor is not registering the flame. The ones that do not click could be the ignite coil, the wire, or the electrode.

Nov 15, 2007 | Viking VGSC366-6B Gas Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...