Question about Computers & Internet

1 Answer

HOW TO TRANSFER VIDEO FROM CAMCORDER TO PC?WHICH IS THE DRIVER?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,768 Answers

1. You will need patch cords such as a usb cable with proper connector to go to from the camcorder to the PC.
You will need the proper software to capture the Video. Possibly already on your computer.
Some video capture card are capable of doing this. Check with your local computer super store to get advice as to what pci card to purchase to do this properly.
Here is a how to on another site that may help you
You didn't give the operating system or the camcorder model so I'm assuminyour equipment is needing these extras to ensure proper transfer of the video.

\http://www.ehow.com/how_4798580_connect-video-camera-computer.html

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHERE CAN I DOWNLOAD JVC GR-DV700EK DRIVERS?


Drivers are not usually needed. Connect the camcorder to your PC with a firewire lead (preferred) or possibly a usb lead ( some camcorders only transfer still images via usb). Fire up your video editing software to capture the video from the camcorder to the PC.

Sep 30, 2012 | JVC GR-DV700 Mini DV Digital Camcorder

2 Answers

Have and old Sony DCR-TRV340E camera, how do I install driver for it on my pc running Windows 7 64 bit version. I like the camera, so do not wish to change it, and have no drivers with it


I'm sorry you're experiencing difficulty with transferring videos from the Camcorder to the Windows 7 Computer. Unfortunately, the USB streaming feature of the Camcorder is not compatible with Windows 7 Operating System. However, you can use either i.LINK or A/V interface to transfer videos from the Camcorder to the Windwos 7 Computer. I have provided a link where you can view the steps to transfer videos using i.LINK interface:
http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893
I have provided another link where you can view the steps to transfer videos using A/V interface:
http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111921
Thank you for understanding.

Mar 18, 2011 | Sony Handycam DCR-TRV340E Digital...

1 Answer

What drivers do I need to transfer video from PV-GS59 to PC with Windows 7?


to transfer video from your camcorder to your pc you will need a firewire cable (ieee 1394). only with this cable you will be able to transer video.
you will also need a firewire port on your pc.
if you don't have one then you can buy a firewire pci card.
no drivers are needed.

see this for info and pictures
http://en.wikipedia.org/wiki/IEEE_1394_interface

Dec 16, 2009 | Panasonic PV-GS59 Mini DV Digital...

1 Answer

Unable to transfer video information onto PC ACER ASPIRE using windows Vista for editing by windows movie maker. Interface on PC is via USB. If software driver for firewire or 1394 interface is available...


If you want to use the USB cable to connect the Camcorder to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. (An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Camcorder to the Computer.

Refer this Link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893


NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.


Good Luck!!!!!!!!!!!!

Sep 28, 2009 | Sony Handycam DCR-TRV16E Mini DV Digital...

1 Answer

I have a DCR-TRV22E sny Handycam and have just got a new PC with Vista. It says my old driver that came with the camcorder is not compatible, where can I get a driver from Thanks


If you want to use the USB cable to connect the Camera to the Computer to transfer the video to the Computer then:

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. (An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Computer.

Refer this link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893

NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.


Good Luck!!!!!!!!!!!!!!!!

Sep 14, 2009 | Sony Handycam DCR-TRV22 Mini DV Digital...

2 Answers

Video transfer


If you're using a Windows Vista Operating System it'snot possible to transfer the videos from the Camcorder to the Computer using the USB connection. The videos from the tape camcorders cannot be transferred to Windows Vista Operating System as there is no USB Streaming ooption available on the Windows Vista Operating System. The Camcorder uses the USB Streaming function to transfer the videos to the Computer. You may wish to purchase a i.LINK/Firewire cable to connect the Camcorder to the Computer in order to transfer the videos from the Camcorder to the Computer.
or
There is an update for driver on the Sony website to transfer the videos from the Camcorder to the Computer using the USB cable.
http://support.sony-europe.com/dime/downloads/downloads.aspx?site=odw_en_GB&m=DCR-HC42E&f=usbdrven_vista

You may also try installing the driver update for the Camcorder. The i.LINK cable gives a better video transfer qulaity than the USB transfer. The i.LINK cable used to connect the Camcorder to the computer depends on the number of pins available on the i.LINK/FIREWIRE port on the Computer. The i.LINK port on the Computer is a D shaped port which is labelled as i, DV, IEEE1394 and Firewire.

Jun 07, 2009 | Sony Handycam DCR-HC42 Mini DV Digital...

1 Answer

What are the steps in transferring the videos using Firewire?


Try starting Windows Movie Maker. It will have a import function that will talk to your camcorder attached Firewire. You will need Movie Maker or some other video editing software to import your tapes into your PC.

See windows help for more info:

http://windowshelp.microsoft.com/Windows/en-US/Help/0cb2dee8-c48d-497d-8b4e-a8dc89f5e0541033.mspx

Mar 23, 2009 | Samsung SC-DX103 DVD Camcorder

1 Answer

My SC-DC163 camcorder does nothing when I try to upload videos to my PC.


the way you can transfer your videos on your computer is by using USB cable and install the driver to your computer. You can upload your videos by saving it on ULEAD products. As far as i know you cant transfer videos from disc to your memory card unless it was been converted but you cant view or watch it on your camcorder itself only computer can play this because your camcorder is not able to play such converted files.

thank you for using fixya
CHARCOIS

Nov 06, 2008 | Samsung SCDC163 Camcorder

2 Answers

TRANSFER VIDEO TO PC


the samsung website has a vista update driver for this problem

Jan 25, 2008 | Samsung VP-D361 Mini DV Digital Camcorder

1 Answer

Connecting analong camcorder to computer


The only Analog camcorder that has a USB Connection for transferring pictures or video is the SC-L770. The SC-L770 can transfer video (live or recorded) and still photos through the USB connection. You can also transfer audio using the audio cable provided. After installing the driver and software, you can begin transferring data using the software provided. Connecting to a PC 1. Connect a USB cable to the USB port on the PC. 2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack) 3. Connect the audio cable to the Line input jack of the PC. If the PC has no Line input jack, connect the audio cable to the MIC input jack. In this case, however, a noise may be produced depending on the PC. Notes: * If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop and the data may be damaged. * If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices, the camcorder may not work properly. * In this case, remove the other USB devices from the PC and reconnect the camcorder. Some other Analog Camcorders have a snapshot mode which allows you to take a still photo with your camcorder. However, you cannot transfer these to a computer unless you purchase additional hardware such as a capture card. Some capture cards have analog a/v inputs which will allow you to use the a/v outputs on the camcorder to connect to your pc and transfer images and video. You can purchase a capture card at most computer and electronics stores. Samsung does not support capture cards.

Sep 06, 2005 | Samsung DouCam VP-D5000i Mini DV Digital...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...