Question about Panasonic Projection Televisions

1 Answer

I need a TY42TM4ZB terminal board to allow me to hear sound from my th42pw5 plasma tv

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a ty-42tm4zb module Contact Colin @ colin099@msn.com.

This module is New

Posted on Jun 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a Samsung tv model htp5054x/xaa? I have power and I can hear audio but no image.


First trouble shooting steps is to try a different source, or at least a different cable. A bad HDMI cable can allow sound but not image. Also look closely at the screen. If you can see a dark image, it would indicate that the lighting system has failed. Check this video for some tips. Samsung Plasma TV Repair How to Repair and Replace Main Board

Sep 07, 2015 | Samsung Projection Televisions

1 Answer

MY TV JUST WENT OUT W/O NOTICE AND I HEAR A HUMMING SOUND


Sound's like your tv just died on you. It will probably cost more to fix it then to replace it.
Buzzing is a common defect among plasma TVs regardless of brand. The buzzing you are hearing is probably a sign of a defective board or power supply or something similar. Either way, you'll need to fix it or get a new television set.
I know plasma television's are cheaper for larger sized sets but I never recommend plasma's to any of my customer's unless they are buying it for a large sized darker room (such as an in-house theater)
If you want a good, bright, clear picture I would stick with an LCD. If you want a higher end you could go with an LED. They both offer less glare than the plasma plus they are better to use with HD devices such as blu-rays & viideo game systems.

Nov 27, 2010 | Hitachi 43UWX10B 43" Rear Projection...

2 Answers

I have a toshiba 15hp16 plasma and it has i single white line down the middle with no picture but there is sound


The signal board is not oscillating. It is the board with rca jacks and rf connectors.

Aug 16, 2009 | Projection Televisions

1 Answer

No picture


Common faults that give you no picture and sound on Plasma are often related to Sustain board, buffer and cables problem.

In this case the cost will be affordable, ans surely worth.

In the unlikely eventuality that instead you have a faulty plasma screen , or a faulty digital control board (main board), the cost of repair may be high.

The only way to find out is by having the TV inspected by a technician.

The most common fault that gives you no picture and sound on plasma is Sustain board , lower buffer, or connector, that is repairable.

Jan 05, 2009 | Projection Televisions

1 Answer

Hitachi plasma tv model 42PD380TA-P1 has sound but without image, how to fix it please?


Many problems with Hitachi Plasmas can all be traced to a defective Y board. this would be the board on the left on most models. you can simply check the fuses on this board and if they are bad simply replacing the fuse will not fix this you will most likly have to replace the board

Jul 18, 2008 | Hitachi Projection Televisions

1 Answer

Black line down the middle of plasma tv screen. After it warms up the line disappears.


It sounds like a possible bad connection on the upper or lower drive board.
You could disconnect power, remove back cover (carefully it will have sharp edges) and disconnect the ribbon from the plasma panel to the circuit boards on the top or bottom of the panel.
these ribbons are held down with a lock type conector of different types. Inspect carefully before unlocking connector, once unlocked and ribbon is removed look for any damage to the contacts then reinsert ribbon and lock connector.
If this doesn't work then you will either need to replace to drive board or the plasma panel

Apr 04, 2008 | Projection Televisions

1 Answer

Red screen and only red bulb powers on.


The red tube and the red crt board sound like the problem. these would be the first thing that needs to replace 250 for tube +50 for crt board. + labor about 300 to 500 to repair

Jan 17, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...