Question about Canon NP 6545 Copier

1 Answer

Need to get the meter count on my canon 6545 copier

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Expert
  • 1,326 Answers

The meter is located on the inside left hand side right above the fixing unit.. That is called the hard counter. There is also electronic counter that can be seen in service mode, but they can be reset at any time.

Posted on May 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon NP 6545 Copier Just needed to know about how old this machine is? Steve


Hello Steve/sweitz,
I will do my best to answer your question. The documentation on your copier goes back to 95/96. It's a darn good copier and it's design was used during the transition from analog to digital copiers. Many of the design characteristics have remained the same for 16 years or better. Canon had been on the cutting edge of digital copiers since the early to mid 80's. And though they are constantly innovating and changing designs, the NP6545 was(and until VERY recently) the backbone of their "mid-volume" copiers. Ok, enuff "blah blah". There are tech bulletins on the Canon web site that go back to 1995/96. So, mid 90's is your answer. Canon kept building on and modifying your copier until at least 2004 since I found a new print of the "Operator's manual" dated 2004. I hope this helps. Take care. P.S....... I have been servicing Canon copiers since 1985. If i helped you, please let "FIXYA" know. :-)

Apr 08, 2011 | Canon NP 6545 Copier

1 Answer

I need to know how to print out a hard copy of the meter read on a Canon Imagerunner 3035 copier??


Hello mhitt,
Even though you have a pretty new copier, the ability to print the meter reading is not available. I know it's crazy since other copiers have been able to do it for years. Only the most recent models of Canon copiers have this ability. To print the meter readings for your copier would require that you go into SERVICE MODE and print a report that has several pages of **** and if you know what you are looking for you can find it.You could use the REMOTE USER INTERFACE (RUI) and view the meter and do a "screen print". I know it's not a happy answer but its correct. I wish you well. :-) By the way, the main meter reading (designated 101) is the count of sheets of paper that have successfully exited the copier regardless of size. My company uses meter "102" which counts 11x17 as 2 clicks on the meter. You probably cannot see this meter unless a service tech programmed it in.

Mar 17, 2011 | Canon imageRUNNER 3035 Black and White...

1 Answer

Canon np 6545 photocopier suddenly dies and appears code e0005, how caramemperbaikinya


This is standard code for the replacement of the fuser cleaning web ( P/N FY1-1046-000 ). The counter will also have to be reset in service mode.

Feb 08, 2011 | Canon NP 6545 Copier

1 Answer

Canon NP 6545 error e210


This code refer to expo unit.The home position sensor possble defected.To reset press the service mode switch sw850 and wait 3 sec,or opem close the front door.

Aug 12, 2009 | Canon NP 6545 Copier

1 Answer

Need user manual for canon 6545


Hello sir; You may go on line to down load it is free.

Jun 13, 2009 | Canon NP 6050 Copier

1 Answer

Where to read the meter count?


Open the front door of the copier, look on the inside pannel of the copier, it should be right above the fixing unit.... Good Luck

Apr 01, 2009 | Canon Printers & Copiers

2 Answers

Canon NP 6545 - Error E020


E020 try by push reset button until show $ upper left
then press key *4* and you will in service mode.
find code error 1 in LCD then press *
copier will restart.

Jan 12, 2009 | Canon NP 6545 Copier

2 Answers

Np6545- erroe code e522


Hello Good Day amazingfirst! you problem for Canon NP-6545 error code E522 according to my Service Manual the problem is the Sorter push bar motor. try to check the sorter motor, add grease if needed so. just focus on the sorter motor ok! there is no need to reset the error code just on and off the machine and it will automatic reset the error code but make sure that the sorter motor will works ok!

Christopher

Jul 15, 2008 | Canon NP 6545 Copier

Not finding what you are looking for?
Canon NP 6545 Copier Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...