Question about Air Tools & Compressors

Open Question

Replacement belt for Nutool N3757 Part Number SCDC 1.5 6NP small compressor. Where can I buy, help! Possibly stores in WA Australia Thanks

Posted by on


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Vac Belts
  • 701 Answers

SOURCE: problem with small belt and beater bar spinning.

Here you can get a package of the belts you need. Also here is a link to the manual:

U5780-900 Belts

U5780-900 Manual

Posted on Nov 18, 2009

  • 1212 Answers

SOURCE: lost keys - Nutool SF10

Yes. That seven digit number is the key code. A locksmith who is well stocked should be able to cut new ones from just the number.

Otherwise write to the manufacturer of the safe or the lock and provide the number and they should send the new keys.

in either case, there will be a nominal fee.

Posted on Apr 12, 2012

  • 1 Answer

SOURCE: how to open nutool sf5

instructions to reset the combination on a nutool SF5 safe

Open the safe door and press the s key press the 1 key twice then press the red button on the inside of door near the hinges.
you will hear 2 long beeps.
enter your combination up to 12 numbers then press the E key your combination is now set

Posted on Oct 19, 2012

  • 42757 Answers

SOURCE: Hi I am in Melbourne Australia and am wondering where I could possibly buy a belt for my Wersheim 3100 and get my machine serviced. The belt has snapped. Thanks in advance.

your machine comes up as a rigid jetter
if that is the case ring 1800-743-443
or e-mail rigid.australia@
if not type in google --manufacturer of wersheim 3100 machine-- and pick a site relevant to what you want

Posted on Jul 16, 2016

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can I purchase eye piece for nutool NTG6L grinder/sander

says not to Canada. May be good for you?

Nutool (2) - Nutool of products by manufacturer Nutool ... Dust collection bag , easy sanding belt replacement , continuous running ... Bench Grinder NUTOOL 150W/150mm.

other suppliers
nutool NTG6L spares Google Search

Apr 23, 2017 | Tools & Hardware - Others

1 Answer

Hi I am in Melbourne Australia and am wondering where I could possibly buy a belt for my Wersheim 3100 and get my machine serviced. The belt has snapped. Thanks in advance.

your machine comes up as a rigid jetter
if that is the case ring 1800-743-443
or e-mail rigid.australia@
if not type in google --manufacturer of wersheim 3100 machine-- and pick a site relevant to what you want

Jul 16, 2016 | Computers & Internet

1 Answer

Parex range hood Model TF 60SS.Clips on the filter are broken off. How to fix or where to get a replacement in Western Australia?

parex range hoods are a product of schweigen
there is a phone
09 8366566 or e-mail contact address that you will have to fill out on line
try google and see if you get the page up , call the number if there are enough numbers (wA) code of 09)
there is a store locator section and a live chat ability on the store locator section of the page

Sep 01, 2015 | Kitchen Ranges

1 Answer

I have a very old Nutool NTG6L which is a combined grinder and 2" belt sander. Is it still possible to buy new sanding belts for this machine or is it too old?

I suggest doing a search on eBay. Depending on where you live, you may need to find them in another country. A Google search might help first but I found these on eBay Ireland.
2 Pack Of 3 Sanding Belts Nutool Nu Tool NTG6L 6130 Bench Sander

Nov 29, 2014 | Tools & Hardware - Others

1 Answer

Air conditioning belt replacement chevyg30 van

Not too small if you got the correct part number
& put the two belts together to check length

Have to pull loosen the a/c compressor to get it on

Not uncommon to be given the wrong belt,
as there are many applications

You always write down the old number or take the
old belt with you, to the parts store

Mar 01, 2013 | 1987 Chevrolet G30

2 Answers

My belt broke from my air compressor and i dont have any way to find the size of my old belt. i have a wl 650001aj compressor. can yall help me find a belt number so i can go to a automanufator to find...

The belt for your compressor is available in a kit from the part number of the kit is WL015303SJ

Here is a picture of the kit,

The reason the belt is sold in a kit form is because the belt will fail when the in-tank check valve fails or begins to leak pressure back into compressor. I do not believe that the belt is sold thru automotive supplier. It is too small. Here is the number stamped on the belt BT012100AV, it has 8 ribs and is about 15 inch length. Good luck

Oct 02, 2010 | Campbell Hausfeld 26 - Gallon Air...

1 Answer

I need to buy a charger for sony handycam ccd trv49e do you know where i could buy one in perth australia

Please go to the Sony centre in Perth Australia.
Its location is shown below:


or contact them at this address:
Sony Centre
440 Murray street
Perth WA 6000
Tel: (08) 9322 5086

Oct 30, 2009 | Sony Handycam CCD-TRV49E Camcorder

1 Answer

Need to replace belt on my craftsman air compressor Item# 00916762000 Model# 16762

You can buy them at any sears store or go to any automotive parts store and take the belt with you and you can get a new belt. If you can't read the numbers you can wrap a string around the pulleys and make the string and take it to a automotive store and buy a replacement belt. If you need help putting it on post here.

Sep 05, 2009 | Craftsman Air Tools & Compressors

1 Answer

I have a sanborn magna force 5hp air comp. The belt is missing and would like to know the length for replacement

The web address below will provide you with the information necessary to order a belt for your compressor. Check the model number first however to insure correct part.

I have replace the V belt on my compressor with an automotive type belt to save money (and better quality). I used a tape measure around both pulleys to get the length. Check the motor/compressor for adjustability as this will help when tightening the belt. If the motor/pump is already positioned all the way out, re-adjust to closed position and remeasure. Now for width of the belt; automotive belts are sold by length and width and use a common numbering system of five digits. The first two numbers printed on the belt refer to the width and the last three refer to length. Measure the width of the pulley grove. My pulley measured about 1/2" . Auto belts were available in 13/16", 15/16" and 17/16" widths. These belts are marked with first two numbers as 13 or 15 or 17. Next use the measurement around the two pulleys. My compressor measured 47 inches around the pulleys. So the automotive belt number for my compressor is 15470. If the measurement around the pulleys was 471/2" then the belt number would have been 15475. The last number refers to 1/2" either a (0) or a (5) Most autopart stores will ask you for the year and model of car for your belt but ask to see the belts with tape measure in hand and check for size using the numbering system for a guide. If your compressor uses a flat style belt you can buy from Measure around the pulleys the same way for length. Good Luck with your project.

Apr 13, 2009 | Air Tools & Compressors

3 Answers

A/C Compressor & Serpentine Belt

some parts stores offer a bypass pulley and belt kit. check local parts house. good luck . also you can get a junk yard compressor. that dont work but does turn and be riding again.

Sep 10, 2008 | 1999 Plymouth Breeze

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1383 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

205 Answers

Brad Brown

Level 3 Expert

15641 Answers

Are you an Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides