Question about Frigidaire Affinity ATF7000ES Front Load Washer

3 Answers

E10 error code? - Frigidaire Affinity ATF7000ES Front Load Washer

Posted by on

  • tcolgrove May 02, 2008

    I've started having the same problem. My front load washer is just about 2 years old, and suddenly when I use the "heavy" or "normal" wash cycle...I get the E10 message. Once I drain and spin again, it is fine...what is going on?

  • roxwalt Nov 18, 2008

    I am getting same E10 error code. Saw solution but it was for models with dials vs digital. This is a real pain because I have to monitor each load and try to start again. Sometimes if I just change spin to medium vs fast it corrects itself for a couple of minutes then same E10 code is displayed. HELP! Thanks!

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

We had the E10 error code. I took off the water intake hose as the washer and the screen there was full of sand from our well. I cleaned the screen out and the code disappeared.

Posted on Mar 29, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I do Have the same issue error 10, I take the cold water off the inlet tube to the washing machine, I then clean the screen using light force air then replace the hose turn the water back on, this works for about a month or a bit longer, All though just about at the point to take the machine apart and do some investigating

Posted on Jan 14, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I don't know much at all about repairs, but think it has something to do with the water coming thru hose to machine and what wash temp you select. (Service person I spoke with had no idea what E10 meant). We have a water 'purifier' gizmo that uses cold water hose and it was disconnected for repair. BUT I was still trying to do wash using cold wash-cold rinse. No longer have problem.

Posted on Jan 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire Affinity ATF6000ES error code E10


Hi - Typically error code E10 indicates that water takes too long to fill. Contact a professional to run multiple tests to verify the incoming water flow is normal and to check the electronic pressure sensor. Depending on the results, washer may possibly have a faulty water inlet valve assembly, pressure sensor/switch or main control board.

Oct 10, 2012 | Washing Machines

1 Answer

Error code


The E10 error code indicates the control does not see a proper fill. Here are a few things you can easily check. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

Apr 22, 2012 | Smeg WDI12 Front Load Washer / Dryer

1 Answer

Kenmore front load washer error code E 10 - washer stops and beeps periodically and needs to have start button pushed again to complete cycle. Seems to happen one minute into cycle and then a coupleof...


1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 11, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

I keep getting an E1 Error code on my Whirlpool Duet dryer. Technician came and didn't fix it. Any suggestions?


1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 15, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool duet dryer-error code e-1?


1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 16, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

E10 error code. I have to keep hitting the start


hi

it is water pump error ,,please check it thank u,,

please rate it

Jul 04, 2009 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

E10 error code


1 beep and E10 is listed as the dispenser door is open. Try reclosing your soap dispenser door tight.

Jan 18, 2009 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....

1 Answer

I have a Frigidaire Gallery front load washer with E10 error code


When ours does that it is because of the hard water build up. We have to un-hook the hot water clean out the minerals and it stops doing it.

Jan 10, 2009 | Frigidaire ATF6000ES Front Load Washer

2 Answers

E10 error code


I had this problem, the washer/dryer stopped working while in the drying cycle and displayed e10 message. It was caused by a faulty three-way inlet valve. The solenoid controlling flow to dryer condenser proved to be open circuit. Pulled washer out from under counter top, unplugged, removed top cover, tested solenoid circuits with ohm meter and found one solenoid was faulty. The filter going into the unit was clear. Replaced whole three way component with one ordered on Internet and all now works fine. Noticed that during drying cycle, water to condenser is constantly being switched on and off, explaining why the green condenser solenoid is the one that wears out first.

Mar 03, 2007 | Zanussi WJS1265W Front Load Washer/Dryer

Not finding what you are looking for?
Washing Machines Logo

861 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...