Question about Sharp AR-M277 All-In-One Printer

1 Answer

H2-00 Error Code, cant clear

Hi, I recently had a technician tell us our fuser unit needed replacing on our AR-M277. Before and after we reinstalled the new fuser unit, we get a h2-00 error code on startup. I've tried the reset codes I've found here to clear iut, but to no avail. Can anyone help out?

Posted by on

1 Answer

Sounds like a tough one, take off the back cover and make sure all connectors are making good contact. You may have a fault in the main logic board.
This might need a tech to check out.
Hope that helps...

Posted on Jun 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix a h4-01 error code on my sharp ar m277 copier


1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
"#" key "*" key "C" key "*" key

Main code 14 Start key Sub code 0 Start key

OR

"#" key "INTERRUPT" key "C" key "INTERRUPT"

Main code 14 Start key Sub code 0 Start key

2. Canceling the simulation mode
When the clear all key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and the
screen returns to the sub code entering display.

* After canceling the simulation mode, be sure to turn OFF/ON the
power and check the operation.

Note: If the machine is terminated by a jam error or paper empty during copying in the adjustment by the simulation, recopying is required.

DO NOT CONTINUE RESET AS THIS CAN CAUSE A FIRE AND RUIN A PERFECTLY GOOD DAY. REPLACE THE FUSER UNIT

Feb 26, 2015 | Sharp Printers & Copiers

1 Answer

My sharp ar-5320 copier is giving h and 4 alternatively


A H4 is a error code for the fuser unit is not warming up in time. Odds are the fuser heater lamp needs to be replaced > it is most likely blown or looks like a candy cane. You have to replaced the part before the code will clear. It could also be the thermal fuse or the thirmister.... I would look at the fuser heater lamp... Good Luck

Sep 29, 2011 | Sharp AR-5320 Black and White Copier

1 Answer

We had a power outage and now the copier shows Error Code H4-01. What do I do ? Please help !


Hi have you tried to doing a trouble clear, this is a fusing unit heating error!
Do you know how t do a reouble clear?

Jul 12, 2011 | Sharp AR-M277 Digital Copier Copier

2 Answers

SHARP AR-M237 H2-00 ERROR CODE---HAVE INSTALLED NEW FUSER UNIT WITH SAME ERROR/CODE PROBLEM.


Hi,
check harness and connector betwen thermistor and control PWB.
clear the error code by using SIM 14 if all didn't work you may have defective AC power supply

I hope this help

Feb 10, 2011 | Sharp AR-M237 Digital Copier

1 Answer

Hi my printer shows the code h.4 error


I think it a fuser error code. Try clearing it:
Push the 'clear' button and then the 'auto' button then the 'clear' button and then the 'auto' button again.This should be done as quickly as you can and the console will go blank.
Next,select 14,which is the low temp clearing code, and then push 'start' and then turn the machine off and back on again.

If the error still occurs call Sharp or qualified technician to resolve your fuser issue, but it is probably cheaper to just get a new copier. j

Feb 05, 2011 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

Error code h5-01 appeared on my sharpmar-507


Check the fuser unit and make sure its installed correctly.

Dec 02, 2009 | Sharp AR-507 Copier

3 Answers

Sharp AR-5127 H2-00 code reset


Sharp Fuser
H2-0 Fusing unit temperature error
H4-0 The fusing unit doesn't heat up.
***ALWAYS DISCONNECT POWER WHEN WORKING ON MACHINE***
You have to reset fuser errors with simulation 14. Push P * C * then 14 then Start (the button you use to make copies) and it should reset the code. If not then replace the fuser.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.
Also check thermal fuse, if defective replace.

Feb 01, 2009 | Printers & Copiers

2 Answers

Error code H4-01


This mean you have low temp. on heat lamp 2 program interput clear interrupt 14 print may clear this code. if not you can look at the fusing unit and reset thrmo breaker that may be pop off.

Jul 26, 2008 | Sharp AR-C160 Color Copier

2 Answers

Error code


Hi, H4 is a heater error. Try resetting it by the following; Enter #, interupt, Clear, interupt, display goes dead, enter 14 then print. That will clear the error code, however if you have a problem with the heater it will return. It is probably the thermal fuse has tripped, which is resetable by removing the fuser unit

Regards

Andy

Jan 22, 2008 | Sharp AR-5320 Black and White Copier

Not finding what you are looking for?
Sharp AR-M277 All-In-One Printer Logo

772 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Printers & Copiers Experts

George Mclaughlin

Level 2 Expert

330 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Vito Suglio

Level 1 Expert

23 Answers

Are you a Sharp Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...