Question about Garden

Open Question

What oil do i put in a stanley bostitch cwc156 air compressor?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 21 Answers

SOURCE: LEAKING BOSTITCH AIR NAILER

you probably have a trigger valve that is green. if so then it will have to be replaced, the valve runs about $ 20 but you can put it in your self.

Posted on Dec 26, 2008

Ad
  • 3 Answers

SOURCE: Stanley bostitch coil nailer gun

check the safty shaft and see if something could be under trigger safty causeing it to fire.

Posted on Feb 20, 2009

smjdragonfly
  • 79 Answers

SOURCE: air coming out the trigger of a stanley air gun

Go to the Stanley Bostitch website. Click on schematics & parts. Find your model number in the drop down list. There is a list of parts and pricing. Just above the parts is a link for the schematic. Honestly, I worked on these things for years. It is best to replace the entire trigger valve. It comes as a kit with instructions grease, and a little tool to hammer your pins out. Lemme know if this helps. Please rate me

Posted on Jun 18, 2009

woobie dog
  • 1273 Answers

SOURCE: I just bought the Bostitch

Check the position of the switches and selectors. It sounds like you are in between settings. Also, put in a few drops of oil, and try your gun out on scrap wood, so oil doesn't come out on your good work.

--W/D--

Posted on Jan 21, 2011

SOURCE: I need a replacement stamp pad for a Stanley

I have a Stanley Bostitch Model 00680-607 machine.If you want I can sell it to you. It is in very good condition.judyc1026@gmail.com - Judy

Posted on Nov 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Motor switch replacement Stanley model#swk-PAC 150h air compressor


For safety reasons work on mains voltage switches must be preformed by a qualified electrician.

Aug 02, 2015 | Stanley Air Tools & Compressors

1 Answer

I have a Stanley Bostitch CAP2000P-OF Air Compressor. It runs constantly and won't reach the shutoff pressure. It will build some pressure. When I turn it off, I dont hear any leaks.


Jim:
There is a leak somewhere... Use a soapy solution at the air tube from the compressor head to the tank (both ends) and at all air hose connections. The bubbles will tell you where the leak is and you can repair the connections from there...

Aug 17, 2013 | Stanley Bostitch CAP2000P-OF 2 HP Peak 6...

1 Answer

Large red pressure adjustment knob on my compressor is broken and will not screw on, compressor will not hold pressure


You may have to replace the regulator as many of them do not sell just the knob. If you go to this link and put your model number in the search box you will be able to see what is available for it. By the way, Stanley (Bostitch) merged with DeWalt so all the breakdowns for Bostitch can be found on the same site now.

DeWalt/Bostitch parts and owners manuals.

Aug 19, 2012 | Stanley Air Tools & Compressors

2 Answers

How do l get a repair manual for bostitch comp cwc200st?


Bostitch was purchased by Dewalt and moved their service and parts information to the following location:
http://servicenet.bostitch.com/ . If you have a Dewalt service center in your area, they should have or can obtain the specific information that you need. Good luck

Oct 20, 2011 | Stanley Bostitch CWC200ST 3HP Oil Lube...

1 Answer

I just bought the Bostitch SB1850BN 18 gauge brad nailer with the Bostitch CAP2000P-OF air compressor. When I hook the hose up and start the compressor, I cannot get the nailer to fire a nail. Only air...


Check the position of the switches and selectors. It sounds like you are in between settings. Also, put in a few drops of oil, and try your gun out on scrap wood, so oil doesn't come out on your good work.

--W/D--

Jan 21, 2011 | Stanley Bostitch SB1850BN 18Gauge Brad...

1 Answer

Type of oil used in pancake stanley compressor


An air compressor should have 30 weight non-detergent oil only, or it will foam up and not oil the bearings.

Sep 20, 2010 | Stanley NEW Bostitch 2 HP 6 Gallon...

1 Answer

Need a manual for the bostich cwc156


The Bostitch site doesn't list that one, but they may have one close enough. http://www.bostitch.com/default.asp?TYPE=STATICLEFT&PAGE=tooldoc.htm&LEFT=left_tooldoc.htm
But I have found the right one for $6 here: http://www.mastertoolrepair.com/bostitch-cwc156-p-4390.html
good luck, Al K

Aug 27, 2010 | Garden

1 Answer

Looking for a piston kit stanley/bostitch model cwc200wt


http://www.mastertoolrepair.com/

Try these guys. If you can't find it listed on their site e-mail them and they should be able to help.
Good luck.

Jun 09, 2010 | Stanley NEW Bostitch 2 HP 6 Gallon...

1 Answer

The bostitch Framing Gun is laking air from the trigger


need to replace the trigger assy should be able to purchase a kit with the necessary parts

Feb 27, 2009 | Stanley Bostitch CWC200ST 3HP Oil Lube...

Not finding what you are looking for?
Garden Logo

Related Topics:

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

roeb

Level 3 Expert

594 Answers

john h

Level 3 Expert

12650 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...