Question about Samsung Prostar 816 Phone

1 Answer

Prostar 816 Toll Restriction

I have a Prostar 816 keyset that used to be not have access to the outside lines. It was only used for internal station to station calls. All of a sudden the outside lines are accessible. How do I turn them off?

Our technical support company went out of business and I can't seem to locate instructions that make sense to me.

Thank you.

Posted by on

  • Anonymous Mar 28, 2014

    the location on a international prostar

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 108 Answers

The Station Toll Class of the phone needs to be changed to a Toll Class 5 which allows 911 calls and certain numbers set in MMC # 94. The program to do this is MMC # 30. The problem is when MMC # 30 is accessed it displays the Toll Class for all 16 phones so use caution that you do not change the wrong extension. If you still need help with this problem please repost and I can walk you thru the process.

Posted on Jul 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to make a conference call from the conf speaker (using the flash button) calling two outside lines.


Once you start using the Conference key on the Prostar 816 you will find it really easy to use, and very helpful! I have uploaded a training video for you to watch, other prostar 816 clips are available on Youtube searching for abbeytel. Visit www.abbeytelcom.com for written copies.

Nov 22, 2010 | Samsung Prostar 816 Phone

2 Answers

Our samsung system only rings on one telephone- how do I get it to ring on all phones and lines


To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
enter in 1 2 3 4 1 # (that enables programming)
enter in #62 the screen should say day ring assn
press the line you wish to program
press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
press # when finished with the line
repeat steps 2 through 5 for the remainder of the lines you wish to change
press # when finished.

Mar 16, 2010 | Samsung 816 Keyset Display Telephone

1 Answer

Samsung 816 power outage dailing an outside line


First thing you should verify a dial tone on the fax machine. (use any analog phone)
If you have dial tone, press 9 and then a number
Second is it conected through tel. system? (did it have an internal extension) and there is no dial tone then your analog port may be fried. Call your telephone vendor. He should be able to help you.
You can purchase a manual for about 10 dollars
Email your system model number to sales at aaa-avad.com for further instructions

Mar 31, 2009 | Samsung Prostar 816 Phone

1 Answer

Samsung prostar 816 plus system ringing problem


sounds like your having a couple of problems at the same time. the lines only ringing at station 1 is the default setting of the system my guess is that the time and date are also way off if thats the case.
To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
5) press # when finished with the line
6) repeat steps 2 through 5 for the remainder of the lines you wish to change
press #when finished.

next, the problem with the cordless not working has to do with the port programming, in default it assigns all ports as multiline sets.
To assign a SLT(single line telephone) port to the system while still in program mode dial #38 the screen should say slt dial type and then 16 0's.
0 = keyset 1=slt set
enter in all 16 digits followed by the # i.e.if your cordless is on port 7 it would look like 0000001000000000 #
lastly the phone that can no lnger recieve calls sounds like the do not disturb or DND has been pressed to stop the alarm from ringing. press the mute/dnd button (light should be off). to cancel an alarm press the ALM/SD button twice and then the hold button.
hope that helps out.

Mar 05, 2009 | Samsung Prostar 816 Phone

1 Answer

Need manual


The way to tell if you have either an 816 or an 824 is by the ammount of dss buttons on the left side by the handset. If there are 16 then its an 816, if there are 24 then its an 824. It should also be on the label on the bottom of the phone if its still there. hope that helps.

Feb 04, 2009 | Samsung Prostar 824 Keyset Telephone

1 Answer

Phone dont ring


To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
5) press # when finished with the line
6) repeat steps 2 through 5 for the remainder of the lines you wish to change
press #when finished. hope that helps

Sep 04, 2008 | Samsung Prostar 824 Keyset Telephone

2 Answers

Speaker phone light continually blinks


The blinking light on the speaker button means the forward when busy is on. To cancel it- With the handset on-hook dial #12.
Then press your own station number. Then dial # again. The speaker button should stop flickering.
Note: If the SPK button continues to flicker, Forward all is activated. It is the same process as above but use #11 instead of #12

Feb 21, 2008 | Samsung Prostar 816 Phone

1 Answer

How do we program to just pick up handset to answer a call without selecting a line?


I had this problem and fixed it by entering programming and then  dayring assignment which is mmc 61. then select the c.o. line (example line 1) then select the phone extensions that you want to ring. this should do it.

Dec 27, 2007 | Samsung Prostar 816 Phone

Not finding what you are looking for?
Phones Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Phones Experts

Yoav Shilon
Yoav Shilon

Level 2 Expert

101 Answers

Dakshinamurthy...

Level 1 Expert

23 Answers

Lawrence Oravetz

Level 3 Expert

7580 Answers

Are you a Samsung Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...