Question about Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

1 Answer

My kenmore ultra wash model #665 does not pump out water.

Posted by on

  • 5 more comments 
  • duffer18hcp Jul 22, 2008

    I also still have water left in the bottom of the tub. Took out the old dishwasher and re hooked the new one. I didn't bother with the disposal knock out because that is how my old one drained. cleaned the air gap, but that did not help either. 5 cycles on this dishwasher and the bottom is already staying dirty do to the dirty dish water.

  • aussee1 Nov 24, 2008

    I HAVE A KENMORE ULTRA WASH DISHWASHER MODEL NO: 17772990 AND IT WONT DRAIN. CAN ANYONE HELP????????

  • srodd Jan 22, 2009

    My Kenmore Ultra Wash model 665 won't drain . . . please help.

  • paw_pawg Feb 08, 2009

    Unit does not pump out water from the basin.

  • Anonymous Feb 10, 2009

    parts for water pump

  • jandlrowe Mar 01, 2009

    water does not pump out of washer

  • debster52fl May 11, 2010

    I have seen the problems posted but do not how to find the "solutions'.



    Kenmore 665 dishwasher does not drain the water out.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My model #665 dishwasher will not pump water into the unit

Posted on Jul 15, 2008

5 Suggested Answers

blueextc3221
  • 15935 Answers

SOURCE: Kenmore Elite ultra wash DW model 665

It appears your pump has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 30, 2010

  • 677 Answers

SOURCE: Cloudy white film on dishes after the cycle has completed.

The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the hard minerals that leave those spots. It is very affordable and even has a money back guarantee. You will love the way your dishes look with this product.

Posted on Sep 30, 2010

Testimonial: "Thank you, I will check it out. But why just now I have had the dishwasher for a few years?"

kirkx
  • 2019 Answers

SOURCE: My Kenmore Ultra Wash model

It is supposed to be hardwired and not plugged in. In which case it could have thrown a breaker and you would not know it unless you used a test light, or reset all the breakers (often you can't visually tell when a breaker it tripped).
There may also a reset on the motor itself that you need to push.

Posted on Aug 14, 2010

IFIXALL
  • 868 Answers

SOURCE: Kenmore dishwasher skips the wash

Replace the electronic control board.Its located under the panel you select cycles from.

Posted on May 21, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore model 665


Power off, check for clogs and if water supply to arm ok. Remove any build ups and reconnect. Good Luck.

Jul 23, 2013 | Dishwashers

1 Answer

I have a Kenmore ultra wash model 665, stock# 15951. When the tub starts to fill the water runs out the drain.


This means there is either an air gap in the drain hose or the drain hose loop is less than 32" high preventing back flow

Sep 18, 2010 | Kenmore 24 in. 15159 Built-in Dishwasher

1 Answer

Cloudy white film on dishes after the cycle has completed.


The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the hard minerals that leave those spots. It is very affordable and even has a money back guarantee. You will love the way your dishes look with this product.

Jul 10, 2010 | Kenmore 24 in. 16352 / 16354 / 16359...

2 Answers

My kenmore dishwasher 665-15817 has a blinking ''Lock On'' button


- To clear the flashing light you will have to reset the console. Do this by closing the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry

Jun 06, 2009 | Kenmore 55612 / 55614 / 5561 / 655619 Side...

2 Answers

Kenmore Ultra Wash Dishwasher Problem


there is no real way of checking the keypad. Not with a meter but if you push normal wash for example and it does not respond this usually means that you have a bad keypad

Nov 09, 2008 | Kenmore 15899 Built-in Dishwasher

1 Answer

Kenmore dishwasher skips the wash


Replace the electronic control board.Its located under the panel you select cycles from.

May 20, 2008 | Dishwashers

1 Answer

Kenmore Ultra Wash Dishwasher; Model 665.17539


I have a Kenmore 665 about 3 years old
Over the last couple months the touch pads have stopped working and I am now down to one control the water miser!
Do I need a new control pad and is that easy to install ?
Thank you for any sudgetstions
KC

Jan 15, 2008 | Kenmore 24 in. 16032 Built-in Dishwasher

Not finding what you are looking for?
Kenmore 16602 / 16604 / 16609 Built-in Dishwasher Logo

Related Topics:

3,019 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

D. E. Hev

Level 3 Expert

1167 Answers

Fred Sops

Level 2 Expert

272 Answers

Cindy Wells

Level 3 Expert

4981 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...