Question about Refrigerators

1 Answer

I havew a Beko AP930 displaying error E8. The instruction book does not explain error codes. Can anyone help?

Posted by on

  • 3 more comments 
  • Anonymous Jun 02, 2008

    I have this same E8 error code fashing. As you say, the manual says nothing. Fridge seems to be working OK, but its just out of warranty. Does anyone know what this means and what to do???

  • Anonymous Jul 20, 2008

    I have the same code E8 flashing on my Beko AP930 my appliance is also just beyond warranty.

  • Jacqui ONeill Jul 24, 2008

    I also have E8 flashing on my Beko AP930 machine and it has also stopped making ice - can you advise the problem?

  • plumville71 Aug 09, 2008

    My ap930 is displaying error code E9. Does anybody know what this one means?

  • Anonymous Dec 23, 2008

    E8 flashing on display



    how long is the original warranty??

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Have the same thing and it is a small sensor on the ice maker that can miss align,ours is under warranty and is being repaired its just a case of re-positioning it...ps make sure water filter is changed every 6 months

Posted on Jun 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code E3, BEKO AP930


Hi, the error code E3 on the BEKO AP930 you have a problem with the fridge thermostat open circuit....

Take care

Jul 23, 2010 | Refrigerators

1 Answer

The water dispenser on my beko ap930 has stopped working can anyone offer any help,the piping all seems to be ok,could it be the valve ?


You have two points where you can check the dispenser water. At the rear where the water supply comes in is the water inlet valve. If you disconnect the dispenser water line and then see if the water comes out when you try the dispenser. If it's not and you can hear to valve click, there is a valve our water supply problem. If you don't hear the click, it's a dispenser switch problem. If it's normal, disconnect it at the bottom of the freezer door and try again. It it's normal here it may be frozen in the door. If this is the case open the door till it thaws. A blanket over the opening will prevent thawing of all the food.

Sep 15, 2009 | Refrigerators

1 Answer

I have an error code E8 on freezer door (usa beko)can you help thanks


Switch the product off and back on again, if the error persists contact your technical assistance...

Aug 15, 2008 | Refrigerators

2 Answers

Fault e8 displayed on beko ap930 fridge freezer


I had the same error message and the ice cube dispenser stopped working. On examining the workings, I found that the wire that should have been connected to the ice cube tray had sheared somehow (???) - a simple splice with lots of insulation tape has apparently fixed the problem.

Jul 03, 2008 | Refrigerators

2 Answers

Beko AP930 with Error code E0 in LHS of display .... what does this mean ? .... nothing in manual


Error codes are printed on underside of plastic cover on top of fridge. Warning electrical components inside! Error code E0 is the FREEZER door not being recognised as closed, switches are normally ok may be problem with printed circuit board. Freezer will work as normal but engineer should be called.

May 08, 2008 | Refrigerators

4 Answers

I own a Beko AP930 side by side frost free fridge freezer.Yesterday an error code appeared on it ,the code is E8.Could you please tell what this means.Thanks.


Just had this fault fixed on my 930. It is the ice sensor just under the ice cube tray - mine had a broken wire (from rotating several times a day for over a year!)
Fiddley but easy fix yourself with a "leggo" block connector to re join the wire if that is the fault, or ring Beko on 01923 654659 (very helpful company to deal with) for a part.
Part number 4344740185.
The other suggestion about the water filter I respectfully believe is wrong!

Apr 21, 2008 | Refrigerators

1 Answer

Chigo Wine Fridge Error


I have a Chigo that displays error code E2.1 alternating at times with E8. The unit runs intermittently. My dealer and I agree the control circuit board is faulty and should be changed at a cost of $125. It is likely due to a failure of the control circuit board, but more specifically the circuitry on the control board related to the upper temperature sensor. The connectors for the sensors and the connector between the compressor and the control and relay boards are also flakey, and this could be the cause, but I could not isolate a bad connection, so will change the control board and hope that fixes the problem.

Mar 22, 2008 | Refrigerators

7 Answers

Beko fridge freezer not working... not cooling


yes it can b fixed is the fridge running ? if it is it will need re gasing which is a common fault with beko and you should not pay more than £40 for the re gas if it is not running it will b either your thermastat which again you should nt pay more than £48 4 or the compressor which will b aprox £120 supply and fit none of the above should b done by a novice good luck

Sep 07, 2007 | Refrigerators

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

868 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4636 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...