Need lexmark x 5470 software for win 7 - Computers & Internet

Lexmark E120 Laser Printer is compatible with Windows 7 and no additional drivers are required for both 32-bit and 64-bit versions. It installs automatically without extra software. Click here for Lexmark E120 Windows 7 compatibility details.

Hope it Helps!
CreativeTECH

Go online and download the driver For X5470 Copatible to Win 7

Since the Lexmark OCR scan software can only be installed using the installation cd and you're missing it, I suggest you contact Lexmark Technical Support to request for that. They can send you one for free. Thanks.

Visit the web link below to download the software driver for the printer
98/Me/2000/XP

http://en.kioskea.net/telecharger/telecharger-895-driver-lexmark-x5470

Don't connect the printer to your computer yet. Check if your Windows 7 is running on 32-bit or 64-bit operating system by clicking on the Windows logo Start menu > right click on Computer > Properties.
Now, there's no specific Lexmark X5470 driver for Windows 7, however, the Vista driver works with it.
For the software, click on this link: http://bit.ly/b09DKc (for 32-bit) or this link: http://bit.ly/bEvOxQ (for 64-bit). Download and install the software. Just follow the instructions. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.

If its a WINZIP or WIN RAR file, you need the corresponding program installed, if it's not, try downloading it from a different source.

HI there if you follow the link bellow select the x5470 and then your operating system you can download the drivers and you wont need to install your disk

http://downloads.lexmark.com/perl/downloads/downloads.cgi

Regards AL "alstech"

If you just connected the printer to your Vista PC, the drivers probably didn't load.
If you haven't yet, you need to install the Lexmark drivers first before you can use your printer. Unplug the printer before installing, then plug it in when prompted by the software.

Lexmark drivers:
http://downloads.lexmark.com/perl/downloads/downloads.cgi

Hi you can download the lexmark software from

www.lexmark.com When you open the page, look at the right side where it says drivers and downloads. Click on it and then select driver finder from the list.

On the driver finder page enter your 5470 model into the search field, is it X5470? well try x5470 or 5470 if it says just 5470.

Anyway all the lexmark drivers are there you just need to find your printer from there, then select your windows version and download. Finaly install the software and happy printing.

The only thing to tell you is go through your menu to your fax settings and make sure all of your choices are set right. Make sure it is on auto not manual for sending.