Question about NAD 712

Open Question

Display not working for NAD C402 tuner

Tuner works and plays fine, just no digital display. I took the top off and it looks like the display board is a little burnt, so something must have fried. Where can I get a replacement part, or is there something else I can do?

Posted by on

3 Suggested Answers

  • 319 Answers

SOURCE: NAD tuner

Depending on your audio power needs, any will work except receivers that already have integrated tuners.

Posted on Apr 21, 2008

  • 1 Answer

SOURCE: NAD 402 Tuner problem

It's sounds like a chip gave up the ghost. You may want to try
turning in on and off a few times to see if you can get the culprit
to function properly again. Electronics are strange creatures in that you can at times just shake them and they will begin to function properly again. A loose wire here or there, instead of any real problem.

However, if the problem's more serious, given the cost of servicing these products, you may be better off just going to Ebay and buying a used one.

I recently purchased a nice used NAD 402 with original box
for $58. Upon arrival I found that the backlight to the digital display was not functioning, however the display itself was, and the sound of the tuner is amazing. It is nearly the equal of many tuners which I have owned in the past at as much as 50 times the price.

Best of luck to you...

Posted on May 31, 2008

petraman7
  • 1175 Answers

SOURCE: we have moved to new zealand will the NAD c422 work here?

Do you have a manual for the unit?
It will give you a yes or no answer

Here!

http://nadelectronics.com/product-manuals

Posted on Apr 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NAD T752 display totally lit up. FM sound works but no frequency display.


Sounds like display driver board {IC} has damaged. Contact any service technician. Electro help

Dec 08, 2014 | NAD T752 A/v Surround Sound Receiver

1 Answer

My fisher rs 929 front panel control board and tuner board has failed.Where can I source these boards?


I am currently working on a Fisher RS-929.It took a static
lightning strike through the antenna connections on the tuner board
what I have found so far is a blown coil, which I rewound, and
3 7812 voltage regulator transistors.if either one of these devices are bad the display(control board will not operate)I will keep you updated on this repair as I expect the replacement parts in this week. Hint:it is best to replace all three and check the two bridge rectifiers also. As these systems were built in 1996 it is doubtful
that replacement boards are redily available

Feb 21, 2014 | Fisher RS929 Receiver

1 Answer

FM Tuner not receiving - Yamaha R7 receiver


Take the cover off and look at the cable that connects the tuner to the main board. Make sure it is connected straight and tight. Make sure all screws in the back are tight, just in case it is a grounding issue. Iff all checks out and you still have issues, replace your tuner.

Apr 30, 2012 | Yamaha Audio & Video Receivers

1 Answer

Sansui G-7700 digital display


Funny that you just posted. On Monday, I dropped off my G-7700 at The Audio Lab in Harvard Square, Cambridge, MA. http://www.theaudiolab.com/

As soon as I walked in the place I knew I was at the right spot. They service and sell some really high-end vintage units as well as carry brand new high-end audio equipment. $60/hr for service work. As a gauge, my G-7700 took 2hrs to do a complete overhaul, which included replacing some pots, re-soldering cold joints, calibrating the tuner and other components. i thought it worked really well before!

Experienced, knowledgeable, efficient.

Give them a call and ship your G-7700 to them. It's worth it.
MRE

Feb 12, 2010 | NAD 712

1 Answer

NAD tuner


Depending on your audio power needs, any will work except receivers that already have integrated tuners.

Apr 21, 2008 | NAD C425 Am Tuner Tuner

2 Answers

Blank display


I replaced it with a 6V lamp. Radio Shack part# 272-1140. It cost $1.49.

Sep 26, 2007 | Yamaha RX-V870 Receiver

1 Answer

NAD 402 Tuner problem


It's sounds like a chip gave up the ghost. You may want to try
turning in on and off a few times to see if you can get the culprit
to function properly again. Electronics are strange creatures in that you can at times just shake them and they will begin to function properly again. A loose wire here or there, instead of any real problem.

However, if the problem's more serious, given the cost of servicing these products, you may be better off just going to Ebay and buying a used one.

I recently purchased a nice used NAD 402 with original box
for $58. Upon arrival I found that the backlight to the digital display was not functioning, however the display itself was, and the sound of the tuner is amazing. It is nearly the equal of many tuners which I have owned in the past at as much as 50 times the price.

Best of luck to you...

Sep 06, 2007 | NAD Audio & Video Receivers

5 Answers

NAD 705 out if order


This seems to be continuin problem with those. Not sure of exact fix yet, but believe it is just a fuse or bulb that needs replaced.

Sep 01, 2007 | Audio & Video Receivers

Not finding what you are looking for?
NAD 712 Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top NAD Audio & Video Receivers Experts

gaucherre

Level 2 Expert

180 Answers

Al Kizina

Level 2 Expert

168 Answers

Brad Brown

Level 3 Expert

13529 Answers

Are you a NAD Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...