Zhone 6211-I3-200 Router Logo
Posted on Aug 03, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a zhone 6211-I3-200-ADSL2+CPE w/phone filter. I am trying to connect 2 computers (1 laptop, 1 desk top) to a linksys WRT 150n wireless router and cannot get the wireless connection to work. It shows up on the computers as connected but no internet access. I am a novice at this so any recommendations would have to be in laymans terms or step by step. I am running windows 7 ultimate on both computers. I am also able to access the admin. for both the modem and router for editing. The router is showing pacific time and should be eastern, but when I try to change it and save, its gives me a message that both the WAN & LAN are using the same IP address. I did try changing the IP address and get a message that the IP address and the gateway are not in the same subnet mask which of course I don't understand. Please can someone help!!

Answer This Question

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

  • Master 1,768 Answers
  • Posted on Aug 03, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

Joined: May 22, 2008
Answers
1768
Questions
0
Helped
528668
Points
5915

1.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Usb driver for windows 7 64 bit
Looks like its only compatible with Windows 7 32bit

http://www.zhone.com/support/downloads/drivers/cpe/6211-Ix/Bcm63xx_ASUS_WHQL_usb_driver_5.2.3667.1.zip
Read full answer
Sep 11, 2013 • Zhone 6211-I3-200 Router
0helpful
1answer

Ok, I have a Zhone 6211-I3-200 Bridge/Router or in other words a Paradyne ADSL CPE, and I cannot for the life of me get it to work with my Xbox 360. I used to have a different router and I would switch...
Zhone Modem Model #. 6211-13-200-0PA ADSL2 BRIDGE/ROUTER, AN.

I would like to upgrade current Firmware, but it is quite difficult and my ISP support even knows how to do this upgrade.

10_11_2012_5_39_03_am.jpg
Read full answer
Nov 06, 2011 • Zhone 6211-I3-200 Router
0answers

Hello to everyone, One computer using xp works
Read full answer
Be the first to answer Jun 17, 2017 • Zhone 6211-I3-200 Router
2helpful
1answer

I need drivers for the adsl router in order to use the USB port

Use the following link to download the driver

 

 

 

http://www.zhone.com/support/downloads/drivers/cpe/6211-Ix/Bcm63xx_ASUS_WHQL_usb_driver_5.2.3667.1.zip

Read full answer
Dec 29, 2010 • Zhone 6211-I3-200 Router
0helpful
1answer

I have a linksys wrt 150n router. i've connected my imac wirelessly, but cannot get my pc-laptop to connect. what am i doing wrong? yes, it is secured with a password.
hi parkerjunkma,

be sure you detected the wrt..then the SSID and Security Encryption should be matched..the SSID will definitely detected so the Password should be entered.

mastergani
Read full answer
Dec 28, 2010 • Linksys Wireless-N WRT150N Router
0helpful
1answer

Router does not show wireless light. I have reset it but can't access it with the setup wizard. Any suggestions?
* NOTE: If you tried to set-up the WRT-150N Router previously, but failed, with the Router ON, press the "Reset" button on the back panel and hold it down for 10 seconds, then release. This will reset the Router to factory settings and erase all previous data.
then do this :
1. Hook up the Linksys WRT-150N Router to the Modem via a LAN cable.
2. Hook up the Linksys WRT-150N Router to your computer via a LAN cable with the LAN cable in Port #1 on the Linksys WRT-150N Router.
3. Type http://192.168.1.1 in the address bar of your web browser.
4. Log-on to the Linksys WRT-150N Router with these log-on credentials:
Username: linksys (lower-case)
Password: admin (lower-case)
5. Click on the "Clone PC MAC Address" tab.
6. Click the "Clone PC MAC Address" button.
7. Click "Save", click "Continue".
8. Click the "Wireless Security" tab.
9. Choose "WPA2 Personal - TKIP/AES" for encrypted security.
10. Enter encryption password (passphrase).
11. Click "Save", click "Continue".
12. Exit the web browser.
13. Disconnect the LAN cable from the computer and Port #1 on the Linksys WRT-150N Router.
In about 5 seconds, your wireless connection should be up and running.

Read full answer
Sep 15, 2010 • Linksys Wireless-N WRT150N Router
1helpful
1answer

Hello, I have a Linksys Router model No. WRT 160N and have problems with the wireless signal. Doesn't appear the wireless symbol ON and I have connected already the modem cable. The modem is OK cuz I can...
* NOTE: If you tried to set-up the WRT-160N Router previously, but failed, with the Router ON, press the "Reset" button on the back panel and hold it down for 10 seconds, then release. This will reset the Router to factory settings and erase all previous data.
Then do this
1. Hook up the Linksys WRT-160N Router to the modem(cable, DSL or satelitte)
2. Hook up the Linksys WRT-160N Router to your computer via a LAN cable with the LAN cable in Port #1 on the Linksys WRT-160N Router.
3. Type http://192.168.1.1 in the address bar of your web browser.
4. Log-on to the Linksys WRT-160N Router with these log-on credentials:
Username: linksys (lower-case)
Password: admin (lower-case)
5. Click on the "Clone PC MAC Address" tab.
6. Click the "Clone PC MAC Address" button.
7. Click "Save", click "Continue".
8. Click the "Wireless Security" tab.
9. Choose "WPA2 Personal - TKIP/AES" for encrypted security.
10. Enter encryption password (passphrase).
11. Click "Save", click "Continue".
12. Exit the web browser.
13. Disconnect the LAN cable from the computer and Port #1 on the Linksys WRT-160N Router.
In about 5 seconds, your wireless connection should be up and running.
Read full answer
Sep 15, 2010 • Linksys WRT160N Wireless Router
0helpful
1answer

I hava zhone router!! and wifi is not working!!
1) check the wireless channel set in the Zhone 6211-I3-200 Router and to your computer. it must be the same
2) make sure you are using the wireless signal within the same floor or else your router's wireless capability will need a signal booster for wireless signals
Read full answer
Feb 15, 2010 • Zhone 6211-I3-200 Router
0helpful
2answers

How do i secure my linksys WRT 150N?
To set-up and secure the wireless router from unauthorized access, follow these steps: -
1. Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL IP address.
3. Enter the router setup, login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WPA2 (if not then WPA).
7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router wirelessly.
Read full answer
Nov 09, 2009 • Linksys Wireless-N WRT150N Router
0helpful
1answer

Internet connection problem Zhone 6211
After a while the net stops working then when i open the router page for the settings it starts back working

Read full answer
Aug 08, 2008 • Paradyne 6211 ADSL2+ Router (6211I1200)
Not finding what you are looking for?

View Most Popular

6211-I3-200 Router

  • Computers & Internet

Related Question

Usb driver for windows 7 64 bit

  • Zhone 6211-I3-200 Router

Related Topics

465 views

Ask a Question

Usually answered in minutes!

Popular Questions

Need login and password for a Zhone router/modem

Zhone (6218-I2-200) Router

How to access my modem settings!?

Zhone 6211-I3-200 Router

I cant log into the admin account on 192.168.1.1

Zhone 6211-I3-200 Router

Zhone linksys router

Zhone (6218-I2-200) Router

Changed router ip now unable to connect...

Zhone (6218-I2-200) Router

Check Out the Mobile Browsers Report
Check Out the Mobile Browsers Report

View all Fixya Reports

Top Zhone Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Zhone Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...