Question about Karcher 2500 PSI Pressure Washer

8 Answers

Simoniz S1400 Electric Pressure Washer

The metal piece that the pressure hose attaches to is cracked. This metal piece is an interior part that is attached to the pump mechanism by 4 Allen key type bolts. I would like to replace this part but I am unable to find the part number for this item. I believe that the Simoniz S1400 Pressure washer is really a Karcher K320. The unit was sold in Canada. A parts break down of this unit would help. Or perhaps there is a way to MacGyver it.




Posted by on

  • 1 more comment 
  • sharpbird00 Aug 13, 2008

    i have a simoniz 1400 karcher work ok but it will not go off went you let go o f spray gun , have to shut a switch off . will sell it for part if intrest

  • Anonymous Mar 16, 2014

    When hose attached to unit and water switched on it goes through the pressure washer and leaks out the front rather than just through the pressure hose

  • Anonymous Mar 31, 2014

    not enough pressure

×

8 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Most of the Simoniz pressure washers are, in fact, rebranded Karcher pressure washers. You can't find support or documentation on their website for machines they no longer make. However, there is a handy dandy website that you can use to find older versions of the Simoniz website, which does have the information you are looking for. I took the liberty of completing the search for your machine: https://web.archive.org/web/20071219120252/http://www.simoniz.ca/productdetails.php?s=6&c=1

I also managed to find a parts diagram and a parts list on a website that sells replacements parts:

Diagram:
http://www.ppe-pressure-washer-parts.com/files/1961581/uploaded/HD1400CA%20(2003)%20&%20HD1500CA%20(2004)%20EXP%20DWG.pdf

List:
http://www.ppe-pressure-washer-parts.com/files/1961581/uploaded/HD1400CA%20(2003)%20&%20HD1500CA%20(2004)%20PARTS%20LIST.pdf

Cheers!
Elf

Posted on Feb 16, 2016

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

THE PICTURE SHOWN IS NOT AN S1400

Posted on Jul 07, 2009

Try momarch

Posted on Jul 01, 2008

I have the same unit. Can not find a parts diagram. In the above picture, to the right of where it's broken, there is a gold spring, (piston?). this is attached to what looks to be a switch for something. I have water shooting out of the gold spring. The pressure is low. Can this be fixed? Is there an online parts diagaram?

Posted on May 27, 2008

Take the part off a good welder should only charge 10$ to fix it for ya and no tracking down parts...

Posted on May 15, 2008

Check out www.pressureparts.com

Posted on May 05, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Stay away from crapy Simoniz. Life will be good then.

Posted on Jun 26, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem as this guy above who wrote:

(I have the same unit. Can not find a parts diagram. In the above picture, to the right of where it's broken, there is a gold spring, (piston?). this is attached to what looks to be a switch for something. I have water shooting out of the gold spring. The pressure is low. Can this be fixed? Is there an online parts diagaram?)

I can seem the find out any info on it either. Please Help!!

Posted on Jun 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't get soap to feed into system


I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.

Jul 04, 2010 | McCulloch FHH18A Electric Pressure Washer

1 Answer

No high pressure water


I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.

Jul 01, 2010 | Karcher 1550PSI Pressure Washer

1 Answer

Solutions won't feed from bottles on machine? I use the switch on this machine to use a deck cleaning solution and the bottles won't feed the solution into the water.


I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.

Jun 25, 2010 | Campbell Hausfeld 1800 PSI Electric...

1 Answer

Pressur not costant


I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.

Jun 21, 2010 | Karcher K2.26 Electric Power Washer

2 Answers

I would like to take apart my Simoniz pressure Washer


I have simoniz 1750 less than 2 years old it works,no leaks,but water is not coming out ,thank you for any tip.

Mar 31, 2010 | Pressure Washers

1 Answer

Where is the pressure switch located on a simoniz 1600 electric power washer?


There is a pressure switch to cut the motor once target pressure is reached. I.e. when the nozzle is closed. It's a black cheap plastic thing, right in front of the pump body. It has a white plastic lever to trip the switch. It was sticking intermittently on mine. the simoniz 1600 is quite a cheap peace of ****, needs fiddling around every time I use it

Sep 16, 2009 | Coleman Powermate DuraBuilt 1400 PSI...

1 Answer

No pressure on simoniz gas pressure washer


I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.

May 03, 2009 | Pressure Washers

1 Answer

Looking for Owners Manual for Simoniz S2600


Hi my simoniz electrc power washer will not go off when I release the trigger , leaks trough the water inlet hose , I replaced the O rings but keeps leaking ..THANKS

Apr 21, 2009 | Pressure Washers

Not finding what you are looking for?
Karcher 2500 PSI Pressure Washer Logo

3,906 people viewed this question

Ask a Question

Usually answered in minutes!

Top Karcher Pressure Washers Experts

John Trevino

Level 3 Expert

1378 Answers

andy just round the...

Level 1 Expert

47 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Are you a Karcher Pressure Washer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...