Question about Cell Phones

1 Answer

Was trying to set a photo as my backdrop when after I pressed something which I don't remember which button... an error occurred, my all my apps were gone and apps error 523 pops in a white screen... I don't have a software for this phone as I only got it as as is... I don't have a back up of my BB in my computer... help what should I do to have the other apps back?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 96 Answers

Hi,

I experienced the same problem sometimes last week,and a simple master reset restored my BB back to a normal working condition but unfortunately after trying all the solutions i laid my hands on,but, i was unable to get all my applications back.

It sounds absurd,but the only solution now is to download all your applications again from the blackberry sites,believe me it didn't take much time as i expected.so sorry.


Good luck!!!!

Posted on Aug 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought new ink cartridges and when i try to print something it gives me a error number 5100


Cause: Head too hot, exceeds the threshold, usually the color Catridge
Solution:

1. Turn Off printer, cable power still plug in.

2. Press Stop/Reset button, don't release the button.

3. Press Power button by holding without release and than release Stop/Reset Button.

4. Press Stop/Reset button two times (2x) now release the Power Button.

5. Wait until service mode to zero (0).

6. Turn off the Printer, cable power still plug in.

7. Press Stop/Reset button, don't release it.

8. Press Power button don't release & than release Stop/Release button.

9. Press Stop/Reset button four times (4x), wait until service mode to "1"

10. Turn off printer, and loose cable power, wait for one (1) minute.

11. Connect cable power, turn on printer again, now this printer ready to use.

Aug 26, 2011 | Canon Pixma Mp250 Allinone Inkjet Photo...

2 Answers

Error 5200 of canon pixma mx328. i already tried turning it on and off several times and even got the cartridges and returned them back but still when i tried to print a page error 5200 still...


Error no 5200 is caused by its temperature high.. to solve your problem follow the instruction given below::

1. Turn Off printer, cable power still plug in.

2. Press Stop/Reset button, don't release the button.

3. Press Power button by holding without release and than release Stop/Reset Button.

4. Press Stop/Reset button two times (2x) now release the Power Button.

5. Wait until service mode to zero (0).

6. Turn off the Printer, cable power still plug in.

7. Press Stop/Reset button, don't release it.

8. Press Power button don't release & than release Stop/Release button.

9. Press Stop/Reset button four times (4x), wait until service mode to "1"

10. Turn off printer, and loose cable power, wait for one (1) minute.

11. Connect cable power, turn on printer again, now this printer ready to use.

Aug 23, 2011 | Canon MX300 Office All-In-One Printer

3 Answers

My mp250 printer shows error p08, I can't use it in any way. I replaced the black ink tank with a new one and tried resetting the printer and it doesn't solve the problem.


Follow the instructions step by step

  1. Turn off printer, cable power still plug in,
  2. Press Stop/Reset button don't release
  3. Press Power Button don't release and than release Stop/Reset button
  4. Press Stop/Reset button 2X , wait until service mode to " 0 "
  5. Turn off printer, cable power still plug in
  6. Press Stop/Reset button don't release
  7. Press Power Button don't release and than release Stop/Reset button
  8. Press Stop/Reset button 4X , wait until service mode to " 1 "
  9. Turn off printer, and loose cable power, wait one minute.
  10. Connect cable power, turn on printer again, now this printer ready to use.

Jul 06, 2011 | Canon Pixma Mp250 Allinone Inkjet Photo...

1 Answer

I have turned camera on and set up to take a photo and the shutter release button will not press in to take the photo. I used the camera yesterday and it worked fine!


Turn the camera on and look into the view finder while you try to press the shutter button. Check the information in the view finder to see whether you are getting an error message. If you see an error message in the view finder, remove the lens cap and proceed to take a photograph but, instead of pressing the shutter button this time, press the button near the top of the camera on the back which says "AF/AE. If the camera takes the photo it means you have somehow initiated the auto focus/auto exposure lock which the camera will not override when attempting to take a photo using the shutter button. When you use the AF/AE button, you override this system. To remedy this issue, when you get the error message try pressing the shutter button again. Also, remove the lens to see if the shutter inside has frozen in the "locked" position. If you find this to be the case you will need to contact Nikon Customer Support. The link for Nikon Support is below. The numbers are half-way down the page.

http://support.nikonusa.com/app/answers/detail/a_id/238

Oct 31, 2010 | Nikon D40x Digital Camera

1 Answer

Epson stylus photo rx580 a printer error has occured see your documentation


Press the stop/clear button then press the maintaince button(spanner) and the ON button all at the same time in that order.That will reset it.

Apr 16, 2010 | Epson Stylus RX580 InkJet Photo Printer

1 Answer

Epson Stylus Photo RX630 All-In-One InkJet Printer "Printer Error Occurred" Please see Documentation


Press the stop/clear button then press the maintaince button(spanner) and the ON button all at the same time in that order.That will reset it.

Jul 15, 2009 | Epson Stylus Photo RX620 All-In-One InkJet...

1 Answer

Ink system has failed. Error:0xc18a0001 my printer is HP Photosmart C6280 All-in-One i have an Error massage (Ink System Failure)it says: ink system has failed. unable to print. refer to printer...


ok i got it...

Press and Hold the “Print Photos” &”Red Eye Removal” buttons. Release both buttons. Display should say”Enter Special Key Combo”

Press and release in sequence”Red Eye Removal”,”Print Photos”,”Red Eye Removal”

Display should say “Support” and display the FW rev: COxxFN0723BR (or something like that)

Press and release the right arrow button until the display says “System Configuration Menu"

Press and release the “OK” button.
Display should say “Hardware failure status: Clear. Press OK to clear”.
Press and release the “OK” Button. Message changes to “Hardware failure status Cleared. Press Cancel to continue”.

Press and release the “CANCEL” button as many times as necessary, so that, either the “Welcome to Photosmart Express” screen appears, or, the “Ink System Failure” screen appears. PLEASE DO NOT TRY TO PRINT AT THIS STAGE.

Using the Power Button, turn the unit OFF and unplug the power cable from back of the printer and wall outlet.

Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first and then into the back of the printer

Turn the unit on. The printer may display message “USE POWER BUTTON TO SHUTDOWN THE PRINTER” followed by “PRESS OK TO CONTINUE”. Press OK.

the printer will get ready as if it were starting perfectly for a first time, it will say something like: printer preparation occuring - do not interrupt

print a test page:
1) Load letter, A4, or legal unused plain, white paper into the input tray.
2) Make sure that the printer is on and loaded with unused plain, white paper.
3) Press Setup . The Setup menu appears.
4) Press the down arrow button to select Tools , and then press OK .
5) Press the down arrow button to select Self-test Report , and press OK . The self-test report prints.

if this doesn't work, i'd call hp support.

Oct 02, 2008 | Office Equipment & Supplies

1 Answer

How do I copy & paste text on the iPhone text input mechanism?


The iPhone way is different. For anything you might want to use in another app, Apple has tried to anticipate the common cases and make them directly available. You don’t copy a picture you took in the Camera app, switch to MobileMail, and paste it into a message; you tap the photo to bring up the toolbar, tap the “do something with this picture” button, and then tap the Email Photo button. You don’t copy a URL from MobileSafari, switch to Mail, and paste it into a message; you tap the URL, then click the Share button that appears. (Which button really should be labeled “Email”, unless and until it offers sharing options other than sending an email.)

May 22, 2008 | Apple iPhone Smartphone

4 Answers

Photo Exploer Runtime Error


My solution:
I found another solution(workaround) instead of reinstalling the program:
1. Try to remember wich devices you used in de Photo explorer (USB-stick, external drive, DVD- CD-drive, or photo-camera connected by USB;
2. You can only start PEX(Photo Explorer) with a volume loaded in this devices!
3. if you don’t remember wich devices you used before, plug in a volume in every device your system has.
4. Start PEX. On my system it is then starting without error!
5. If PEX is normaly started: goto File/Preferences/ (or F6 key), take category Cache and under “History” clean all adresses and maps by clicking the button.
6. Close PEX. Remove all the volume’s you don’t need;
7. Restart PEX. Now the program will start without any error.
8. Advice: each time you use PEX with an external device do action 5. before closing the program.

Mar 26, 2008 | Nova Development Photo Explosion Deluxe...

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

William Alequin

Level 3 Expert

928 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...