Question about Bosch Logixx WFT 2806 Front Load Washer/Dryer
It means the float at the base of the machine has been triggered. Open the back panel on the machine (turn off power and water tap first) then remove all screws and take metallic back off. Dry inside base with a towel and push down the float which is located in the corner. This will reset it. Keep an eye on it as it may mean you have a leak.
Posted on Aug 04, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: f:23 code logixx edition75
Usually means there is water in the base pan and the flood safety has been activated. If you tip the unit forward a touch you will most likely find that water is expelled from the bottom front. The machine should work but obviously the source of the leak has to be found. Check door gasket for tears etc, water valves and drain hoses.
Hope this helps.
Posted on Jul 07, 2010
Tips for a great answer:
Feb 13, 2015 | Bosch Washing Machines
Jan 03, 2015 | Washing Machines
Apr 10, 2012 | Bosch Logixx WFT 2806 Front Load...
Jan 19, 2018 | Bosch Logixx WAS2446 Front Load Washer
Mar 19, 2011 | Washing Machines
Jan 01, 2011 | Bosch Washing Machines
Jul 07, 2010 | Bosch Logixx WFT 2806 Front Load...
Nov 28, 2009 | Bosch Logixx WFT 2806 Front Load...
8,822 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: