Question about Televison & Video

1 Answer

I have a dynex plasma tv that is on the stanby move and Im not able to find a solution to the problem

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 505 Answers

If it is stuck in standby, your issue could be in a variety of areas. The most common is likely bad capacitors on the power supply. Many Dynex models have these bad capacitors (caps) and they are very easy to spot if you open up the tv. You will have to lay it down on a soft blanket face down. You may have to remove the stand. Most of the screws will be going straight in the back, remove all these screws so you can get the back off. Once you do, look for bulged caps = they should be flat on the top, not bulged like in the picture


I have a dynex plasma - e0288f4.jpg

if you find bad caps, then they are likely the cause

if not, we can diagnose with more info. Do you hear a click when you try to turn it on? does it click on and back off? do you see a led change colors? all details will help us figure it out, we can definitely diagnose this, just let me know

Posted on Aug 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Channel input displays keeps blinking


this is a faulty Main controller Board


part number : 715T2300-3

hope 2 help

www.bostonrecycling.net


LCD PARTS / PLASMA PARTS / LAPTOPS PARTS

Jun 25, 2012 | Dynex DX-LCD32-09 LCD TV

1 Answer

Got no picture on my pioneer plasma but the stanby lights still on


On some plasma tvs they will shut down on stand by if the cooling fans fail , my tv has 5 across the top. may be 1 or more has failed, if fans are ok then may be a capacitor in the power supply has leaked,

pete

Nov 11, 2010 | Pioneer Televison & Video

1 Answer

Why power/stanby blinks light red


how many times does it flash? The back of the manual will usually tell you what the flashes mean. Try this: unplug tv from power. While unplugged, hold the power button in on the TV, not on the remote! Hold for 10 seconds. Replug the power and try to power it up. If you get no picture, you need a repair. Contact the manufacturer for an authorized servicer.

Jul 19, 2010 | Sony KDF-E42A10 42 in. LCD Television

1 Answer

Dynex 42


If it was hit hard enough it damaged the display panel, therefore would not be feasible to replace. They cost as much as a new set.

Jun 04, 2009 | Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

WON'T TURN ON.


Powerboard damaged, if you could not see the Led light on stanby mode it means you have no power at all.

Go ahead and replace your powerboard and your TV will be Ok

May 28, 2009 | LG 42PC3DV 42 in. Plasma EDTV

1 Answer

Can't turn on from Stanby mode


I would assume the power board has a problem. A tech could possibly repair it without replacing the whole board.

Nov 13, 2008 | Pioneer PDP-5070HD 50 in. Plasma...

1 Answer

PLasma wont turn on


Unfortunately you need a repair man. The power supply is bad.

Nov 12, 2008 | Televison & Video

4 Answers

Program a universal remote for the Dynex 32" 720p Flat Panel


Try using the codes listed for Orion products. Worked for me.

Jun 26, 2008 | Dynex 32 in. LCD Flat-Panel HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75767 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...