Question about Autodesk Autocad 2004 for PC

Open Question

Rhino Alarm Instruction Manual For Rhino GX Car alarm, Missing page 5 & 6 the wiring coulor code page

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lanson smoke alarm


Smoke alarms are finicky about battery brands. Look inside the alarm or on the back to see if specific battery brands/numbers are recommended.

See page 13 of the official instruction manual at:
http://psaproducts.com.au/Assets/documents/PDF/Fire%20DataSheet/5800%20and%205800RL%20manual.pdf

The following 9-volts are recommended:
EVEREADY/ENERGIZER 522
DURACELL MN1604, MX1604


If alarm is over 5 years old (or past the date printed on the alarm), toss it and get a new one. They don't last forever. Be safe!

Dec 02, 2013 | Home

1 Answer

I WANT TO FIX PRESTIGE CAR ALARM IN THE CAR' AND HOW TO CONECT THE WIRES


Below is a fast installation guide for most car alarm systems. Refer to your manual were needed. Car alarms can be hard to set up and include bands of wiring and sensing elements to instal. Take it step by step and taking after the operating instructions cautiously.

Steps to installing a car alarm system.
1. Mount the siren to a solid surface under the hood. Make sure that you point the horn of the siren toward the ground so that moisture won't affect the sound or horn.
2. Drill a hole through a rubber grommet in the firewall of the car and feed the sirens wire through the hole into the passenger compartment of the car.
3. Feed the power wire through the same hole on the passenger side. Make sure there is enough slack to reach the car's battery. 4. Connect the alarm's power wire to the battery.
5. Put a fuse on the power wire next to the battery.
6. Mount the shock sensor as described in the car alarm's manual.
7. Drill holes in the dash were you will want to place the LED status indicator. Feed the LED's wire through the hole and place the double-sided mounting tape to the back of the LED and place it over the hole in the dash.
8. Find the wires that work the car's power door locks.
9. Connect the door-lock relay to the lock/unlock wires and connect the alarm wire to the relay in the manner described by the tech advisor. 10. Locate the wire that works the courtesy light if the alarm has current sensing.
11. Connect the current sensing line from the alarm to the courtesy light wire.
12. Locate the factory door trigger if the alarm does not have current or voltage sensing.
13. Connect the factory door trigger to the alarm.
14. Locate the starter wire on the steering column below the starter switch. Cut the line and connect the starter disable relay. Connect the starter disable wire from the alarm to the relay.
15. Mount the valet switch somewhere under the dash.
16. Connect all the wires to the proper inputs and outputs of the alarm.
17. Find a sturdy surface under the dash and mount the module under the dash.
18. Use tie wraps to secure the wires of the harness and mount it under the dash.
19. Arm the alarm and test. Adjust the sensitivity as needed.

Feb 17, 2011 | 1999 Nissan Pathfinder

1 Answer

I just bought a 1997 mazda miata with no manual i need to set the car alarm and dont know how?


The car alarm was not part of the car as it left the factory, it was fitted afterwards. You'd need to find out what make and model your alarm system is, at least the make, and google for an instruction manual of that alarm. The make could be on your key fobs, or maybe there are stickers on the windows?

Aug 07, 2010 | 1997 Mazda MX-5 Miata

2 Answers

I dont know how to hook up my parking lights to my auto page alarm


It tells you and shows you in the manual just follow the directions and make sure you use a relay. If you don't use a relay you might as well throw it in the garbage now don't waste your time. or get someone to install it for you It'll be cheeper . If you don't want to read the manual you won't be able to install the alarm there are many wires elayd etc that MUST BE INSTALLED correctly and if your asking about the parking lights you didn't even read the first 5 pages. Im not being meen just honest We can't install this stuff for you. Seriously it takes a few hours with lots of eading

Mo

Jul 16, 2010 | RF225 Remote Keyless Entry Car Alarm...

1 Answer

I cannot locate the valet switch to disengage the alarm.


    Preparing for the Installation
  1. Step 1 Gather materials. You will need scissors or a knife, crimps, solder material, solder gun, test light, drill, screw bit, screws, tie wrap, double-sided mounting tape and a voltmeter.
  2. Step 2 Read the installation manual that comes with the alarm. Make sure you understand what the instruction manual says. If you purchased the alarm from an automotive store, you can always ask them some basic questions to help you get started.
  3. Step 3 Call the tech support number for manufacturer of the alarm and tell the tech advisor what kind of car you have. Ask what kind of locking system your car uses and what color wire to connect to in order to interface the lock/unlock feature of your alarm,
  4. Step 4 Ask the advisor how to hook up the relay for the door lock feature, what color wire to connect to for the starter disable feature, and how to hook up the relay.
  5. Step 5 Ask how to set up the voltmeter to test the door lock wires.
  6. Step 6 Ask how to access the factory door triggers.
  7. Step 7 Determine where you intend to place the components by referring to the installation manual.
  8. The Installation
  9. Step 1 Mount the siren to a solid metal surface under the hood. Point the horn of the siren down toward the ground so that moisture cannot collect inside it. Drill a hole through a rubber grommet in the firewall of the car and feed the siren's wire through that hole into the passenger compartment of the car.
  10. Step 2 Connect the alarm's power wire directly to the car's battery. Feed the wire through the rubber grommet on the firewall and into the passenger compartment of the car.
  11. Step 3 Put a fuse on the power wire next to the battery. Check the installation manual for the fuse size.
  12. Step 4 Mount the shock sensor as described in the manual.
  13. Step 5 Drill a hole in the dash where you intend to place the LED status indicator. Feed the LED's wire through that hole and place the double-sided mounting tape to the back of the LED and place it over the hole in the dash.
  14. Step 6 Locate the wires that work the car's power door locks.
  15. Step 7 Connect the door-lock relay to the lock/unlock wires and connect the alarm wire to the relay in the manner described by the tech advisor.
  16. Step 8 Using the advice of the tech advisor, locate the wire that works the courtesy light if the alarm has current sensing.
  17. Step 9 Connect the current sensing line from the alarm to the courtesy light wire.
  18. Step 10 Locate the factory door triggers if the alarm does not have current or voltage sensing.
  19. Step 11 Connect the factory door trigger to the alarm.
  20. Step 12 Find the starter wire on the steering column some inches below the starter switch. Cut the line and connect the starter disable relay. Connect the starter disable wire from the alarm to the relay.
  21. Step 13 Mount the valet switch somewhere under the dash.
  22. Step 14 Connect all the wires to the proper inputs and outputs of the alarm module.
  23. Step 15 Mount the module to a sturdy surface under the dash using the drill, screw bit and screws.
  24. Step 16 Use the tie wraps to secure the wires of the harness and stuff it back under the dash.
  25. Step 17 Arm the alarm and test its performance.

Jun 01, 2010 | 1998 Ford Taurus

1 Answer

I have a moss car alarm ms705 but the remote is broken. do you know where can i find another remote for it pls?


Hello, I have the same security alarm moss MS705.
But without any manual or even box. And I don't know how to plug it in to my car. Can you may send me some pics of the wiring diagram from Instruction Manual? If you have one?
Thank you guys for any help.

Apr 09, 2010 | ' II' DIY Car Alarm Vehicle Anti-theft...

1 Answer

Newly installed car alarm, LED in solid light n horn/siren blares


if you follow instruction properly than the alarm should work properly, Go over your wiring again 2-3 times make sure it make sense to you with the instructions. If it make sense than take the unit back and get another, can be faulty alarm.

Aug 26, 2009 | 2003 Toyota Corolla

1 Answer

How do you reset a rhino car alarm system after installing a new car battery?


The System was a "Rhino GTR". To reset the alarm system, pressed no.1 button to unlock the doors, lock again with no. 2 button. Then pressed no.1 again to open doors and car started.

Regards...

Aug 22, 2009 | Vehicle Parts & Accessories

2 Answers

Car alarm keeps going off


ground the pink with white wire behind the drivers kick panel

Aug 19, 2009 | Code-Alarm Code Alarm Transponder

7 Answers

Maual to safehouse burglar alarm Model 49-307


Not sure about model 49-307, but it's probably the same as modle 49-537...
1) hit *
2) enter old code (which after power-on reset is the factory default of 1234)
3) hit * again
4) enter your new 4 digit code
5) hit * one last time

Your new 4 digit code should now work to arm and disarm it.
If you enter any wrong digits hit the # key to clear the error, and re-enter the code.

hth,
Paul W.

Mar 23, 2009 | Home Security

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Autodesk Computers & Internet Experts

kakima

Level 3 Expert

101516 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Clive Gray

Level 3 Expert

1479 Answers

Are you an Autodesk Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...