- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It should be on the main power board, near where the power cord plugs into the set. It will be quite a large cap, you can check its value by reading the value on the side of it, ensure the you replace it with the same value cap.
If you have a picture but the top is folded over, your vertical IC is probably good and you need to replace the pump-up capacitor next to the IC. When the pump-up cap (typically a 47 or 100uF 35V cap) is open then the picture will have white lines and foldover at the top. The typical vertical output IC is the LA7838, but I am not familiar with exactly which output IC your set uses.
i have just pulled the back by removing 5 or 6 screws. you can see the circuit board, and the power cord is soldered directly into the board. two wires,one black and one white. near the left back corner--- from the back. you can re solder it.