Question about Canon imageRUNNER 2200

1 Answer

Giving an erro E220(IR3300) - Canon imageRUNNER 2200

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,219 Answers

E220
0001 A fault is detected on the inverter PCB for the scanning lamp.
Main cause The inverter PCB is faulty. The reader controller PCB is faulty.
Action
1. Wiring
Is the wiring from the scanning lamp to the reader controller PCB normal?
NO: Connect the connector firmly, and correct or replace the wiring.
2. Inverter PCB, Reader controller PCB
Try replacing the lamp inverter PCB. Is the problem corrected?
YES: End.
NO: Replace the reader controller PCB.

Posted on Aug 03, 2010

  • Nik Shamsul Nik Mohammad

    you also can change your power supply then you have to clear your dc controller (* 2 8 *,copier,function,clear,dc cont and ok)

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i solv error 100 code in canon ir3300


Hi Raj

please follow link it will give you all the error codes and also will tell you what your one is..hope this helps

Dec 23, 2014 | Canon 2 Ir3300 Ir3300i B/w Copier/ Network...

1 Answer

Pairing plantronic e220


The password is 0000 (four zeros)

Click here to view the manual::
http://www.retrevo.com/d/df/explorer220_ug_en_es_fr_pt.pdf?doc=16684384e22a61fa560541555ba43b62&ts=1265469714731

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks!

Feb 07, 2010 | Plantronics Explorer 220 Bluetooth Headset...

1 Answer

Problem conection


go to
http://nodevice.in/driver/iR3300/get34358.html
download the drivers and install tem to your PC. Then connect the device to the PC and allow Windows some time to detect it and load the required drivers. Then it will wor.

Aug 21, 2009 | Canon imageRUNNER 3300 All-In-One Laser...

1 Answer

All leds blink on a Lexmark E220


Thermistors work differently than resistors.


When you apply heat, the resistance goes DOWN. When cold, you should measure high resistance.

Test with a hair dryer.

Jul 24, 2009 | Lexmark E220 Laser Printer

3 Answers

Ir3300 xerox machine stalation problem


sir,

sub:- display error (e000002-0000)

give me solution display ravalante emicheyali cheppandi.

Jan 23, 2009 | Canon imageRUNNER 3300 All-In-One Laser...

4 Answers

Canon ir3300 or 405 better


Definitely go with the 3300 (if you haven't already). It's one of the best B&W copiers Canon has ever produced. The 3300s still sold as refurbs by Canon in the US so parts will be around for them over there for quite a while yet.

Oct 08, 2008 | Canon Office Equipment & Supplies

3 Answers

Problem on GP405 coppier


E220
The lamp intensity does not
exceed a specific value
within a specific time after
scanning operation starts
(following lamp activation).
• The lamp remains off for 10
sec when it should remain on.
E301 is
The output of the intensity
sensor drops below a specific
value while the lamp is on.
E100 is
The BD signal is not
generated during image
formation (2nd sheet pickup
and later).
• The BD signal cycle has
deviated.
• The BD signal is not
generated within 2 sec after
the laser has turned on (at
time of 1st sheet pick-up).

To have all three come up at differant times and intermittantly
I suspect the front door interlock switch is not being made properly or needs replacing

If you require more help please contact me by reposting
Thank You

Mar 09, 2008 | Canon imageRUNNER 400S Copier

Not finding what you are looking for?
Canon imageRUNNER 2200 Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1983 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...