Question about RCA 25250RE1 2-Line Cordless Phone

Open Question

"Answering System Busy" message

I am trying to retrieve my messages but when I press the "Ans Sys" button I get a "Answering System Busy" message .... I really need to get my messages

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 27 Answers

SOURCE: "flash busy" message when trying to retrieve voicemail messages

It is telling you that the voice mail ports are busy and can not take another call in to the voice mail system. If the port the does not clear up after a min or two then reset the voice mail system . Unplug the power cord from the wall and let it set for a min , then plug it back in and wait about 5 min for the system to come back up , that should free up the ports .

Posted on Apr 17, 2009

Ad
cindystauart
  • 1 Answer

SOURCE: How to retrieve messages from the answering machine ..remotely

Remotely Operating Your Answering Machine

Call your telephone number and wait for the answering machine to answer. If the answering machine is off, it will answer after about 10 rings and series of beeping sounds.
During the greeting message (or a series of beeps when the answering machine is off), press [0] and enter your PIN code within 2 seconds (see "Setting a Security Code or Personal Identification Number (PIN)" on page 54).
The answering machine announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero." You will hear a beep.
Enter a remote command within 15 seconds, each command there after must be entered within 2 seconds.

Posted on May 12, 2008

rockitman187
  • 2559 Answers

SOURCE: How do I retrieve messages on the Panasonic KX-T7030 phone?

  • Call into your mailbox (usually by dialing intercom 165)
  • Press 4, and 4 again (for "Incomplete call handling")
    By default, three options are enabled:
    option #1: leave a message
    options #5: call the operator
    option #6: return to top menu
  • Follow the audible prompts to disable options 5 and 6

Here are some other features you may need

  • Make sure your Auto Answer button is lit up, so you can receive intercom announcements, and respond hands-free.
  • Use the Call Forwarding (FWD) to send un-answered calls to another phone or to voicemail
  • Press BGM (or 1 on the touch-tone pad) for background music, if your system is equipped.
  • Use Absent Messages to show text messages on other people's phones when you are away.
  • Use System Call Waiting so your phone will ring even when you're on the phone. Press Intercom and dial 7311 to set it up, or 7310 to cancel.
  • Use Do Not Disturb (DND) when you don't want to receive calls. Press Intercom, press FWD/DND and dial 1 to activate, or 0 to cancel.
  • Press MESSAGE when you call a busy intercom number. This will turn on the MESSAGE light on the other phone, and the other person can tap that button to automatically call you back.
  • If you get a busy signal when you call an intercom number, you can signal the other person by dialing 1 (if that phone is programmed for System Call Waiting (above).
  • Dial 330 to make an announcement to all phones.
  • If you want your phone to automatically select an outside line when you pick up the handset, press PROGRAM, dial 99, dial 12, press STORE, press PROGRAM
  • Posted on Feb 12, 2009

    • 2 Answers

    SOURCE: Answering and memo systems will not record or

    I had the exact same problem. But mine was due to a slight power surge even though I had it plugged into a backup battery with a surge protector. I called RCA and they said this model has a history of answering system malfunctions with power surges. It has a two year warranty. Gave the girl my info from my receipt (although it sounded like I really did not need the actual receipt). She gave me an RMA # so they are shipping me a new unit. I have to pay for return of the bad unit though. Try calling them @ 1.800.511.3180 and explaining your issue. Good luck!

    Posted on Dec 04, 2009

    MNfisherman
    • 11896 Answers

    SOURCE: I have an answering service through my phone

    Dial your own number, when the voicemail picks up, dial either the * key or the # key. Then follow the instructions for setup that they give you. There should be an option for notification settings within the voicemail system.

    Posted on Jun 14, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    All I want to know is how to shut off my vetch phone answering machine so I can add one with speaker voice. The model I have is CS6719-2



    Answering system settings

    Answer on/off:

    The answering system must be turned on to answer and record messages.

    When the answering system is turned on, the /ANS ON/OFF light on the telephone base turns on and ANS ON displays on the handset.

    To turn on or off with the telephone base:

    • Press /ANS ON/OFF to turn the built-in answering system on or off when the phone is not in use.

    When the answering system is turned on, it announces, "Calls will be answered." When the answering system is turned off, it announces, "Calls will not be answered."

    To turn on or off with a handset:

    1. Press MENU when the phone is not in use.

    2. Press DOWN arrow or UP arrow to scroll to Answering sys, then press SELECT.

    3. Press DOWN arrow or UP arrow to scroll to Answer on/off, then press SELECT.

    4. Press DOWN arrow or UP arrow to choose Answer: On or Answer: Off,then press SELECT to confirm your selection. You hear a confirmation tone.

    Hope this will help.




    Sep 02, 2015 | Lands Phones

    2 Answers

    Erased messages - digital recovery?


    Sorry, the digital memory can't be restored ones the power is cut or the messages are erased. Some high tech lab somewhere FBI/CIA maybe just maybe could do it but no noting we can do about it.

    you can try a old trick of holding down the play button for 10 or more seconds.

    I'm really sorry.

    Jul 04, 2008 | Uniden TRU8885 Digital Answering Machine

    1 Answer

    How do I turn off answering machine part?


    Answering system settings

    Answer on/off:

    The answering system must be turned on to answer and record messages.

    When the answering system is turned on, the /ANS ON/OFF light on the telephone base turns on and ANS ON displays on the handset.

    To turn on or off with the telephone base:

    • Press /ANS ON/OFF to turn the built-in answering system on or off when the phone is not in use.

    When the answering system is turned on, it announces, "Calls will be answered." When the answering system is turned off, it announces, "Calls will not be answered."

    To turn on or off with a handset:

    1. Press MENU when the phone is not in use.

    2. Press DOWN arrow or UP arrow to scroll to Answering sys, then press SELECT.

    3. Press DOWN arrow or UP arrow to scroll to Answer on/off, then press SELECT.

    4. Press DOWN arrow or UP arrow to choose Answer: On or Answer: Off,

    then press SELECT to confirm your selection. You hear a confirmation tone.

    Hope this will help.

    Sep 02, 2015 | Vtech Lands Phones

    1 Answer

    How do I turn off the answering machine?


    Answering system settings
    Answer on/off:
    The answering system must be turned on to answer and record messages. When the answering system is turned on, the /ANS ON/OFF light on the telephone base turns on and ANS ON displays on the handset.
    To turn on or off with the telephone base:
    • Press /ANS ON/OFF to turn the built-in answering system on or off when the phone is not in use.
    When the answering system is turned on, it announces, "Calls will be answered." When the answering system is turned off, it announces, "Calls will not be answered."
    To turn on or off with a handset:
    1. Press MENU when the phone is not in use.
    2. Press DOWN arrow or UP arrow to scroll to Answering sys, then press SELECT.
    3. Press DOWN arrow or UP arrow to scroll to Answer on/off, then press SELECT.
    4. Press DOWN arrow or UP arrow to choose Answer: On or Answer: Off,
    then press SELECT to confirm your selection. You hear a confirmation tone.
    Hope this will help.

    Sep 02, 2015 | Vtech Lands Phones

    1 Answer

    I am trying to setup voice mail on a RCA ViSYS 2-Line Phone (25255RE2), and i cannot figure it out.


    RCA ViSYS 2-Line Phone (25255RE2)

    Here's the manual for your 2-line phone:
    http://www.rca4business.com/products/pc/pdf/instruction-book/25255RE2.pdf

    refer to pages 40-43 of your manual for "Answering System Operation."

    To enable your Answering System, press and hold the "ans sys" button for 2 seconds.
    The "ans sys" button indicator will flash.

    To disable your Answering System, press and hold the same button for 2 seconds.
    The "ans sys" button indicator will go off.

    May 16, 2011 | RCA ViSYS 2-Line Speakerphone

    1 Answer

    Lost book need to reset my answering machine when someone calls


    Answering system settings
    Announcement
    The telephone is preset with a greeting that answers calls with "Hello, please leave a message after the tone." You can use this preset announcement, or replace it with your own.
    Play your announcement
    Press MENU/SELECT to show the menu when the handset is not in use.
    Press MENU/SELECT to select >ANS. SYSTEM.
    Press or to select >ANS SYS SETUP, then press MENU/SELECT.
    Press or to select >ANNOUNCEMENT, then press MENU/SELECT.
    The handset announces, "To play, press 2. To record, press 7." Press 2 to play.


    Record your own announcement
    Press MENU/SELECT to show the menu when the handset is not in use.
    Press MENU/SELECT to select >ANS. SYSTEM.
    Press or to select >ANS SYS SETUP, then press MENU/SELECT.
    Press or to select >ANNOUNCEMENT, then press MENU/SELECT.
    The handset announces, "To play, press 2. To record, press 7." Press 7 to record.
    The handset announces, "Record after the tone. Press 5 when you are done."
    After the tone, speak towards the microphone of the handset.
    Press 5 when finished.
    The answering system automatically plays back the newly recorded announcement. Press 5 to stop the playback at anytime;

    Your manual can be found at:

    http://vt.vtp-media.com/ecp/documents/product_Product/36/UserManual/1279/cs6229-3_manual_i5.pdf

    May 16, 2011 | Vtech CS62293 Cordless Phone

    2 Answers

    I am trying to record my personal greeting on my message machine with the DECT 6.0...can you please explain to me how I can record my greetings?


    Which model phone do you have? For the CL82509 and related DECT 6.0, you need to set the outgoing message from the handset when the answering machine is on. (It can be turned on from the handset).

    For the outgoing message: with the handset in Idle mode, press Menu/Select. Use the up (Dir) and down (CID) arrows to highlight Ans Sys Setup. Then press Menu/Select. Use the same arrow keys to select Announcement and press Menu/Select again. Press 7 to record a new announcement. At the tone, speak your message clearly then press 5 when you have ended the message. The message will play back.

    This model's manual is available here: http://att.vtp-media.com/ecp/documents/product_Product/132/UserManual/5995/cl82509_manual_USA_i6.pdf . See page 15 to set the answering system outgoing message. (This is different than Voicemail. To set up Voicemail, you will need to see your telephone provider's documentation.)

    Most AT&T phone manuals are available here: http://telephones.att.com/att/index.cfm/product-support/manuals/ .

    I hope this helps.

    Cindy Wells

    Apr 01, 2011 | AT&T DECT 6.0 Cordless Phone System with...

    1 Answer

    Need help to retrieve messages from outside


    I have a different model but the default code for mine is 123.
    To change the code from the machine, I have to press the STOP/SET button and hold it and wait for prompts.

    Apr 29, 2009 | GE 29878GE1 Digital Answering Machine

    1 Answer

    How do I retrieve messages on the Panasonic KX-T7030 phone?


    • Call into your mailbox (usually by dialing intercom 165)
    • Press 4, and 4 again (for "Incomplete call handling")
      By default, three options are enabled:
      option #1: leave a message
      options #5: call the operator
      option #6: return to top menu
    • Follow the audible prompts to disable options 5 and 6

    Here are some other features you may need

  • Make sure your Auto Answer button is lit up, so you can receive intercom announcements, and respond hands-free.
  • Use the Call Forwarding (FWD) to send un-answered calls to another phone or to voicemail
  • Press BGM (or 1 on the touch-tone pad) for background music, if your system is equipped.
  • Use Absent Messages to show text messages on other people's phones when you are away.
  • Use System Call Waiting so your phone will ring even when you're on the phone. Press Intercom and dial 7311 to set it up, or 7310 to cancel.
  • Use Do Not Disturb (DND) when you don't want to receive calls. Press Intercom, press FWD/DND and dial 1 to activate, or 0 to cancel.
  • Press MESSAGE when you call a busy intercom number. This will turn on the MESSAGE light on the other phone, and the other person can tap that button to automatically call you back.
  • If you get a busy signal when you call an intercom number, you can signal the other person by dialing 1 (if that phone is programmed for System Call Waiting (above).
  • Dial 330 to make an announcement to all phones.
  • If you want your phone to automatically select an outside line when you pick up the handset, press PROGRAM, dial 99, dial 12, press STORE, press PROGRAM
  • Feb 12, 2009 | Panasonic KX-T7030 Corded Phone

    1 Answer

    Playing back messages on the AT&T 1725


    Press the mail box button quickly to hear only new messages. Press and hold until you hear the system respond to hear all messages. Press again to stop playback.

    Sep 20, 2008 | AT&T 1726 Digital Answering Machine

    Not finding what you are looking for?
    RCA 25250RE1 2-Line Cordless Phone Logo

    Related Topics:

    84 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top RCA Lands Phones Experts

    kakima

    Level 3 Expert

    102366 Answers

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Cindy Wells

    Level 3 Expert

    5129 Answers

    Are you a RCA Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...