Question about Poulan 25cc 2-Cycle Gas Powered String Trimmer #P2500

1 Answer

I took apart the handle for my Toro Trimmer Model number 51972 and a spring fell out and I'm not sure where/how it goes back into the handle. I took it apart because the trimer runs but the spool does not rotate when holding in the trigger(s). Does anyone have a picture or instructions on how to put it back into place?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 157 Answers

Hello, Hopefully the exploded parts list can help you out... I've done the reassemble of a trimmer handle once and explaining it can get dicey. The only suggestion that helped me was to have scotch tape handy to act as a third hand when holding small items between two other parts. You don't actually wrap the item, just place it on a small piece of tape - when the item is in position the tape removes easily. Your diagram link is the top one. Good Luck!

http://www.poulan.com/node7925.aspx

Posted on Dec 04, 2011

  • Richard Crate Dec 04, 2011

    I appoogize Rob, I posted the wrong link by accident, here is the correct one
    https://homeownersolutions.toro.com/port...

    Again, my appologies.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I took apart my Eureka 71B hand held vacuum and a small spring fell out. I don't know where it goes and can't find a manual anywhere. Help?


Lonny,
I have a 71-B2 model myself and if you can take a picture of the spring, I can try to take mine apart and see if I can figure out where your spring goes and get back with you.

Aug 09, 2015 | Eureka 71B Easy Clean Hand Vacuum Yellow

1 Answer

I have taken apart the start trigger to check, whether the cable had come out and a spring fell out, how and where does the spring go back?


hey that's an electric lawnmower handle , you cant fool me posting this in the chainsaws section ,!!

the spring u mention it goes right back in center it holds two red handles away from switch (black thing in center) of course when your hands hold down on red handles it compresses spring and closes switch , motor brushes are most common cause of mowers not running

May 10, 2015 | Garden

1 Answer

How to fit a trigger spring on a Ryobi Trimmer model PBC-3020


I have to go on general experience with my knowledge of Rybobi on this one. The handle of the unit where the spring is should have several screws in recessed holes. If you remove those the handle should split in two. When you do this make sure you are careful when separating it. There are usually some small parts that have specific places and you want to see how they seat back in there as you reassemble.

Aug 15, 2014 | Ryobi Garden

1 Answer

Do you know what the proper Champion part number is for a Toro 51972 weed trimmer is? This was purchased used and it had a RCJ4 Champion plug in it and I just need to verify that this is the correct plug....


that is the correct spark plug for the unit. i work at a power equipment store where we work on homelites. 90% of the time it wont start or run right is usually carb issues . need to get it rebuild or replaced

Aug 25, 2011 | Toro& Electric String Trimmer

2 Answers

TORO 51464 Electric trimmer battery: can it be changed?


Yes you can replace the original battery. It is recommended you have it done by and Authorized Service Dealer.

When the battery no longer holds a charge, you can purchase a new battery and have it installed at your
Authorized Service Dealer. If you want to discard the trimmer, remove and recycle the battery before
discarding the trimmer.

1. Remove the 2 bolts and nuts securing the trimmer handle section to the black center section.

2. Remove the 6 screws securing the two halves of the handle section together and pull the halves apart.
3. Remove the battery and disconnect it from the wire leads.

4. Discard the trimmer.

5. Recycle the lead-acid battery according to local codes.


Find you nearest dealer here:

https://homeownersolutions.toro.com/portal/server.pt?space=CommunityPage&cached=true&parentname=CommunityPage&parentid=2&in_hi_userid=30166&control=SetCommunity&CommunityID=226&PageID=30037

The part number for your battery is: 106-1905

May 24, 2011 | Toro Electric Trimmer

1 Answer

How to put together the CST2000 and install a battery


Which part of the Grass Hog did you take apart? If you mean the spool head, that is easy to reassemble. The actual spool (the round part with the line coming out) goes into the cavity on the bottom of the trimmer, with the line poking out of the hole in the side several inches (not enough to hit the plastic guard). Then the cover (orange with the spring on it) fits on top of the spool so that the spring pushes on the spool and the two tabs on the side snap into the holes in the trimmer.

Unless you took another part off, that should be all you need to do to reassemble the Grass Hog. Turn it right-side up and turn it on to make sure everything works.

Jun 01, 2010 | Black & Decker Cst2000 12 - Volt Cordless...

1 Answer

Part fell out of gun dont know where it goes


is it the carrier support spring or the trigger spring?
go to www.winchester.com look for owners manual for model 94 come times the site dont work well.you may have to call them and ask for a schematic parts break down they will send it to you or e-mail it.

Oct 28, 2009 | Sport & Outdoor - Others

1 Answer

Trying to find a owners manual for a Toro grass trimmer model 51972


you can get it here: https://lookup3.toro.com/request/request.cfm
print for free or purchase copy

Sep 13, 2009 | Garden

1 Answer

Homelite mighty lawn trimmer vt26


Go to www.homelite.com then in the red area up top click on order parts, then click launch parts catalog, then scroll down and click agree and then you will need your model # then you will have a list of breakdowns that you can look at for your trimmer

Oct 26, 2008 | Homelite Mighty Lite Lawn Trimmer

Not finding what you are looking for?
Poulan 25cc 2-Cycle Gas Powered String Trimmer #P2500 Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Phil Walker
Phil Walker

Level 3 Expert

608 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...