Question about E-Machines T6528 PC Desktop

2 Answers

Usb problems One of my rear usb ports does not work. When anything is pluged into it nothing at all happens. I also only see 4 usb ports listed, (all are taken and show what's in each,) and I'm guessing the one I'm not using should show up there too as empty, so I'm not sure how to resolve that. It also shows two usb Root Hubs under them. Also starting today I can no longer get a mouse to work thru the port for it, I have to use a usb mouse.

Posted by on

  • hwddawg Apr 29, 2008

    i was given the chipset driver by emachines and they tell me it can install the usb 2.0 driver but when i click on it i'm told it's not a valid Win 32 application. Am I doing this correctly.

  • hwddawg Apr 29, 2008

    ok ran it but still the same thing, one rear usb port still doesn't work and the mouse port is dead still, emachines suggest i take it to a repair place now so any other help would be great.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 160 Answers

Hello,
For Solving your problem do the following:

1. See that your USB 2.0 is working properly
2. See that you had installed the USB2.0 drivers
3. If you had installed already, re-install the drivers again
4. Restart the system

Let me know if your problem is solved and rate me as FIXYA!

Posted on Apr 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 487 Answers

Mmmm you need the via chipset for that. Emachines website will help you with this problem. their tech site is real good also the tech chat. they can online fix it for you

Posted on Apr 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have model: P6314f HP .My two front usb ports shorts out flash drives (anything) pluged into them.Can I replace the ports with new ones ?


7_15_2013_5_18_54_pm.jpgNo you cant replace them because they are embedded in the MOBO.Do the back usb ports working? If yes the you can buy a usb card.

Jul 12, 2013 | HEWLETT-PACKARD Hewlett Packard Pavilion...

1 Answer

Keyboard failure on dell dimension 2400


Your keyboard needs to be pluged into one of either a USB port, if it has a USB connection or a PS2 Port if it has a PS2 connection.

USB is the rectangular shaped port, while the PS2 is a round, usually purple coloured connector.

Try pluging it in and out, with USB connection type try another USB port at the rear of the chassis or on the front too.

It is possible that the keyboard is faulty, in other words it has come to the end of it's life. Meaning that you may need another keyboard.
Try this keyboard on another computer, a friends computer will do. You could even try a friends keyboard in this computer as another test.

Take care!
damnor01

Jul 04, 2011 | Dell Dimension 2400 PC Desktop

1 Answer

I added a 4 port usb card to a dell e520. The


try updating the drivers to the card to see what happens. another solution is try it on another computer. if the same problem exists on another computer you could have a bad card.

Mar 30, 2010 | Dell Dimension E520 PC Desktop

1 Answer

USB ports are not working. One was working last


1. Go to Start>> Right click My Computer>> Manage>> Device Manager 2. Expand the USB Controller section 3. Right click and Uninstall all of the listed USB devices 4. Reboot the system

Mar 10, 2010 | E-Machines eMachines Desktop PC

1 Answer

I have a duracell usb memory device, but when I


1. Go to Start>> Right click My Computer>> Manage>> Device Manager 2. Expand the USB Controller section 3. Right click and Uninstall all of the listed USB devices 4. Reboot the system

Mar 04, 2010 | PC Desktops

1 Answer

All USB ports on my emachines T6542 do not work


try to see the BIOS SET UP if the USB port are in enbled status..

if its not,, enabled them...

and see the connection of the USB port into your motherboard if it connect properly..

Oct 27, 2009 | E-Machines eMachines Desktop PC

1 Answer

Problem with side USB ports on Insignia Desktop Computer


DO YOU HAVE A 99 CENT STORE WHERE YOUR AT, BUY A HUB THAT EXTENDS THE PORTS AND GIVES YOU 4 MORE USB PORTS,

THERE SOME PLACE TO CHECCK IN THE CONTROL PANAL, DEVICE MANAGER, NETWORKING AND SHARING, PROBLEMS AND REPORTS,SECURITY CENTER, SYNC CENTER, WINDOWS DEFENDER AND WINDOWS FIREWALL.

CHECK FOR UPDATES, SWAP THE CONNECTOR WITH THE FRONT OR REAR CONNECTION OF THE USB CONNECTORS AND SEE IF IT IS THE BOARD THE PROBLEM.

ROD

Feb 13, 2009 | Insignia D300a PC Desktop

2 Answers

USB problem with Dell Dim. 4600


1.have you use other usb device also same ?????? try plug in rear port usb also same????

2.try to use you original dell cd to preloaded OS. to see usb can recognizing.if still can't may be you usb port faulty need to change motherborad

Jan 02, 2009 | Dell Dimension 4600 PC Desktop

3 Answers

Mecer Laptop USB port not detecting


Reset the Bios.That solved the same problem i had.

Aug 30, 2008 | PC Desktops

Not finding what you are looking for?
E-Machines T6528 PC Desktop Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an E-Machines PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...